/**
******************************************************************************
* File Name : USART.h
* Description : This file provides code for the configuration
* of the USART instances.
******************************************************************************
* @attention
*
* © Copyright (c) 2020 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under Ultimate Liberty license
* SLA0044, the "License"; You may not use this file except in compliance with
* the License. You may obtain a copy of the License at:
* www.st.com/SLA0044
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __usart_H
#define __usart_H
#ifdef __cplusplus
extern "C" {
#endif
/* Includes ------------------------------------------------------------------*/
#include "main.h"
/* USER CODE BEGIN Includes */
#include
#include
#include
#include "usbd_cdc_if.h"
/* USER CODE END Includes */
extern UART_HandleTypeDef huart5;
extern UART_HandleTypeDef huart1;
extern UART_HandleTypeDef huart2;
extern UART_HandleTypeDef huart3;
extern UART_HandleTypeDef huart6;
/* USER CODE BEGIN Private defines */
#define RFID_USART huart1
//#define METER_USART huart2
#define IAP_USART huart3
#define BLE_USART huart5
#ifdef FUNC_RS485_SLAVE
#define RS485_USART huart2
#endif
#define WIFI_USART huart5
#define DEBUG_USART huart6
#define UART_BUFFER_SIZE ((uint32_t)2048)
#define TX_TIMEOUT ((uint32_t)0x010)
#define RX_TIMEOUT ((uint32_t)0xFFFFFFFF)
/*
UART protocol constant declare
*/
#define PROTOCOL_HEAD 0xaa
#ifdef FUNC_RS485_SLAVE
//Internal Module Communication Protocol / 2.2 Slave Address
//0x01 Aux. power module Aux. power module in DC EVSE system
//0x02 Fan control module System fan control module in DC EVSE system
//0x03 Relay control module Output relay control module in DC EVSE system
//0x04 IO Extend module IO extend module in DC EVSE system
//0x05 AC mainboard module AC mainboard module in DC EVSE system (*)
//0x06 LED control module LED control module in DC EVSE system
//0x07 Relay RC_1 module Output relay module in 360KW Power Cabinet
//0x08 Relay RC_2 module Output relay module in 360KW Power Cabinet
//0x09 Relay control module Output relay module in 360KW Dispenser
//0xFF Broadcast Don!|t need to address module or broadcast usage
//#define PROTOCOL_ADDR 0x05
#define PROTOCOL_ADDR 0xff
#define PROTOCOL_ADDR_AC_MAINBOARD 0x05
#else
#define PROTOCOL_ADDR 0xff // 0x01:AUX PWR 0x02: FAN BD 0x03:RLY BD 0xff:Any
#endif //FUNC_RS485_SLAVE
#define PROTOCOL_ADDR_BROADCAST 0xff
#define PROTOCOL_MESSAGE_QUERY_FW_VER 0x01
#define PROTOCOL_MESSAGE_QUERY_HW_VER 0x02
#define PROTOCOL_MESSAGE_QUERY_PRESENT_INPUT_VOLTAGE 0x03
#define PROTOCOL_MESSAGE_QUERY_PRESENT_OUTPUT_VOLTAGE 0x04
#define PROTOCOL_MESSAGE_QUERY_FAN_SPEED 0x05
#define PROTOCOL_MESSAGE_QUERY_TEMPERATURE 0x06
#define PROTOCOL_MESSAGE_QUERY_AUX_POWER_VOLTAGE 0x07
#define PROTOCOL_MESSAGE_QUERY_RELAY_OUTPUT_STATUS 0x08
#define PROTOCOL_MESSAGE_QUERY_GFD_ADC_VALUE 0x09
#define PROTOCOL_MESSAGE_QUERY_INPUT_GPIO_STATUS 0x0A
#define PROTOCOL_MESSAGE_QUERY_ALARM_LOG 0x22
#define PROTOCOL_MESSAGE_QUERY_SN 0x23
#define PROTOCOL_MESSAGE_QUERY_MODEL_NAME 0x24
#define PROTOCOL_MESSAGE_QUERY_PARAMETER 0x25
#define PROTOCOL_MESSAGE_QUERY_RTC 0x26
#define PROTOCOL_MESSAGE_QUERY_PRESENT_OUTPUT_CURRENT 0x27
//edward 2019_08_27
#define PROTOCOL_MESSAGE_QUERY_EVSE_STATE 0x28
#define PROTOCOL_MESSAGE_QUERY_EVSE_ALARM 0x29
#define PROTOCOL_MESSAGE_QUERY_BLE_STATE 0x2A
#define PROTOCOL_MESSAGE_QUERY_BLE_LOGIC_CENTRAL_ID 0x2B
#define PROTOCOL_MESSAGE_QUERY_POWER_CONSUME 0x2C
#define PROTOCOL_MESSAGE_QUERY_GUN_PLUGIN_TIMES 0x2D
#define PROTOCOL_MESSAGE_QUERY_EVSE_AUTH_MODE 0x2E
#define PROTOCOL_MESSAGE_QUERY_PRESENT_LEAK_CURRENT 0x2F
#define PROTOCOL_MESSAGE_CONFIG_FAN_SPEED 0x81
#define PROTOCOL_MESSAGE_CONFIG_SN 0x82
#define PROTOCOL_MESSAGE_CONFIG_MODEL_NAME 0x83
#define PROTOCOL_MESSAGE_CONFIG_PARAMETER 0x84
#define PROTOCOL_MESSAGE_CONFIG_RELAY_OUTPUT 0x85
#define PROTOCOL_MESSAGE_CONFIG_GPIO_OUTPUT 0x86
#define PROTOCOL_MESSAGE_CONFIG_RTC 0x87
#define PROTOCOL_MESSAGE_CONFIG_LED_ACTION_ALARM 0x88
#define PROTOCOL_MESSAGE_CONFIG_MAX_CURRENT_PWM_DUTY 0x89
#define PROTOCOL_MESSAGE_CONFIG_LEGACY_REQUEST 0x8A
#define PROTOCOL_MESSAGE_CONFIG_MCU_RESET 0x8C
#define PROTOCOL_MESSAGE_CONFIG_BREATHE_LED_TIMING 0x8D
#define PROTOCOL_MESSAGE_CONFIG_LED_BRIGHTNESS 0x8E
#define PROTOCOL_MESSAGE_CONFIG_EVSE_AUTH_MODE 0x8F
#define PROTOCOL_MESSAGE_CONFIG_ERASE_MEMORY 0x94
#ifdef FUNC_RESET_CONNECTOR_PLUGIN_TIMES
#define PROTOCOL_MESSAGE_CONFIG_RESET_CONNECTOR_PLUGIN_TIMES 0xA0
#endif
#define PROTOCOL_MESSAGE_UPGRADE_START 0xe0
#define PROTOCOL_MESSAGE_UPGRADE_ABOARD 0xe1
#define PROTOCOL_MESSAGE_UPGRADE_TRANS 0xe2
#define PROTOCOL_MESSAGE_UPGRADE_STOP 0xe3
#define INPUT_L1_AC_VOLTAGE 0x01
#define INPUT_L2_AC_VOLTAGE 0x02
#define INPUT_L3_AC_VOLTAGE 0x03
#define OUTPUT_L1_CURRENT 0x11
#define OUTPUT_L2_CURRENT 0x12
#define OUTPUT_L3_CURRENT 0x13
#define LEAK_CURRENT 0x21
#define GROUND_FAULT_VOLTAGE 0x31
//#define ERROR_RESTORE_POINT 0xFE //Hao: Not Used
//#define ERROR_TIGGER_POINT 0xFF //Hao: Not Used
#ifdef FUNC_SIMU_CHARGE_CURRENT_OUTPUT
#define SIMU_CHARGE_CURRENT_CMD 0xFC
#define SIMU_CHARGE_CURRENT_ON 0xC1
#define SIMU_CHARGE_CURRENT_ON_PWD 0x1234
#endif
#ifdef FUNC_SWITCH_RELAY_WELDING_PROTECT
#define SIMU_SWITCH_RELAY_WELDING_CMD 0xFD
#define SIMU_SWITCH_RELAY_WELDING_DISABLE 0xD1
#define SIMU_SWITCH_RELAY_WELDING_PWD 0x5678
#endif
#define SETTING_LEGACY_REQUEST 0x01
/*
RFID module protocol constant declare
*/
#define RFID_CMD_AUTO_DETECT 0x1D
#define RFID_CMD_LED 0x14
#define RFID_CMD_REQUEST_SN_14443A 0x20
#define RFID_CMD_REQUEST_SN_14443B 0x60
#define RFID_CMD_REQUEST_SN_FELICA 0x2f
#define RFID_CMD_BLOCK_READ 0x21
#define RFID_CMD_BLOCK_WRITE 0x22
#define RFID_CMD_HALT_14443A 0x28
#define RFID_CMD_HALT_14443B 0x62
#define BLE_INIT_DELAY 10
#define BLE_CMD_SET_RESTORE 0x00
#define BLE_CMD_SET_DTR 0x01
#define BLE_CMD_SET_DSR 0x02
#define BLE_CMD_SET_PAIRING_MODE 0x03
#define BLE_CMD_SET_SECURITY_MODE 0x04
#define BLE_CMD_SET_SECURITY_TYPE 0x05
#define BLE_CMD_SET_DISCOVERABILITY 0x06
#define BLE_CMD_SET_CONNECTABILITY 0x07
#define BLE_CMD_SET_ROLE 0x08
#define BLE_CMD_SET_DATA_MODE 0x09
#define BLE_CMD_SET_NAME 0x0a
#define BLE_CMD_SET_MAX_POWER 0x0b
#define BLE_CMD_SET_MIN_INTERVAL 0x0c
#define BLE_CMD_SET_MAX_INTERVAL 0x0d
#define BLE_CMD_SET_TX_PHY 0x0e
#define BLE_CMD_SET_RX_PHY 0x0f
#define BLE_CMD_SET_DISCONNECT_DEVICE 0x10
#define BLE_CMD_GET_ADDR 0x11
#define BLE_PROTOCOL_MESSAGE_SIGN_IN 0x01
#define BLE_PROTOCOL_MESSAGE_PUK_REG 0x02
#define BLE_PROTOCOL_MESSAGE_PIN_GET 0x03
#define BLE_PROTOCOL_MESSAGE_PIN_RENEW 0x04
#define BLE_PROTOCOL_MESSAGE_PIN_DEL 0x05
#define BLE_PROTOCOL_MESSAGE_PIN_QUERY 0x06
#define BLE_PROTOCOL_MESSAGE_CHARGING_START 0x11
#define BLE_PROTOCOL_MESSAGE_CHARGING_STOP 0x12
#define BLE_PROTOCOL_MESSAGE_STATUS_QUERY 0x13
#define BLE_PROTOCOL_MESSAGE_RESERVATION 0x14
#define BLE_PROTOCOL_MESSAGE_TIME_QUERY 0x21
#define BLE_PROTOCOL_MESSAGE_TIME_CONFIG 0x22
#define BLE_PROTOCOL_MESSAGE_LED_QUERY 0x23
#define BLE_PROTOCOL_MESSAGE_LED_CONFIG 0x24
#define BLE_PROTOCOL_MESSAGE_CURRENT_LIMIT_QUERY 0x25
#define BLE_PROTOCOL_MESSAGE_CURRENT_LIMIT_CONFIG 0x26
#define BLE_PROTOCOL_MESSAGE_FIRMWARE_VERSION_QUERY 0x31
#define BLE_PROTOCOL_MESSAGE_FIRMWARE_UPDATE_REQ 0x32
#define BLE_PROTOCOL_MESSAGE_FIRMWARE_TRANS_REQ 0x33
#define BLE_PROTOCOL_MESSAGE_FIRMWARE_END_REQ 0x34
#define WIFI_INIT_DELAY 10
#define WIFI_CMD_SET_RESTORE 0x00
#define WIFI_CMD_SET_DTR 0x01
#define WIFI_CMD_SET_DSR 0x02
#define WIFI_CMD_GET_ADDR 0x03
#define WIFI_CMD_SET_SSID 0x04
#define WIFI_CMD_SET_CHANNEL 0x05
#define WIFI_CMD_SET_SECURITY_MODE 0x06
#define WIFI_CMD_SET_PASSWORD 0x07
#define WIFI_CMD_SET_DHCPSERVER 0x08
#define WIFI_CMD_SET_TCPSETVER_CONFIG 0x09
#define WIFI_CMD_SET_AP_ACTIVE 0x0a
#define WIFI_CMD_SET_DATA_MODE 0x0b
#define WIFI_PROTOCOL_MESSAGE_SIGN_IN 0x01
#define WIFI_PROTOCOL_MESSAGE_PUK_REG 0x02
#define WIFI_PROTOCOL_MESSAGE_PIN_GET 0x03
#define WIFI_PROTOCOL_MESSAGE_PIN_RENEW 0x04
#define WIFI_PROTOCOL_MESSAGE_PIN_DEL 0x05
#define WIFI_PROTOCOL_MESSAGE_PIN_QUERY 0x06
#define WIFI_PROTOCOL_MESSAGE_CHARGING_START 0x11
#define WIFI_PROTOCOL_MESSAGE_CHARGING_STOP 0x12
#define WIFI_PROTOCOL_MESSAGE_STATUS_QUERY 0x13
#define WIFI_PROTOCOL_MESSAGE_RESERVATION 0x14
#define WIFI_PROTOCOL_MESSAGE_TIME_QUERY 0x21
#define WIFI_PROTOCOL_MESSAGE_TIME_CONFIG 0x22
#define WIFI_PROTOCOL_MESSAGE_LED_QUERY 0x23
#define WIFI_PROTOCOL_MESSAGE_LED_CONFIG 0x24
#define WIFI_PROTOCOL_MESSAGE_CURRENT_LIMIT_QUERY 0x25
#define WIFI_PROTOCOL_MESSAGE_CURRENT_LIMIT_CONFIG 0x26
#define WIFI_PROTOCOL_MESSAGE_FIRMWARE_VERSION_QUERY 0x31
#define WIFI_PROTOCOL_MESSAGE_FIRMWARE_UPDATE_REQ 0x32
#define WIFI_PROTOCOL_MESSAGE_FIRMWARE_TRANS_REQ 0x33
#define WIFI_PROTOCOL_MESSAGE_FIRMWARE_END_REQ 0x34
/* USER CODE END Private defines */
void MX_UART5_Init(void);
void MX_USART1_UART_Init(void);
void MX_USART2_UART_Init(void);
void MX_USART3_UART_Init(void);
void MX_USART6_UART_Init(void);
/* USER CODE BEGIN Prototypes */
void serialPutString(uint8_t *fmt, ...);
extern uint8_t UART_RFID_rx_buffer[UART_BUFFER_SIZE>>4];
extern uint8_t UART_RFID_recv_end_flag;
extern uint16_t UART_RFID_rx_len;
#ifdef FUNC_RS485_SLAVE
//huart2
extern uint8_t UART_RS485_rx_buffer[UART_BUFFER_SIZE];
extern uint8_t UART_RS485_recv_end_flag;
extern uint16_t UART_RS485_rx_len;
#endif
//huart3
extern uint8_t UART_IAP_rx_buffer[UART_BUFFER_SIZE];
extern uint8_t UART_IAP_recv_end_flag;
extern uint16_t UART_IAP_rx_len;
extern uint8_t isUSB_CDC_IAP;
extern uint8_t UART_BLE_rx_buffer[UART_BUFFER_SIZE];
extern uint8_t UART_BLE_recv_end_flag;
extern uint16_t UART_BLE_rx_len;
extern uint32_t UART_BLE_Receive_Tick;
extern uint8_t UART_BLE_Init_OK;
extern uint8_t UART_WIFI_rx_buffer[UART_BUFFER_SIZE];
extern uint8_t UART_WIFI_recv_end_flag;
extern uint16_t UART_WIFI_rx_len;
extern uint32_t UART_WIFI_Receive_Tick;
extern uint8_t UART_WIFI_Init_OK;
extern char *BLE_CMD[];
extern char *WIFI_CMD[];
/* USER CODE END Prototypes */
#ifdef __cplusplus
}
#endif
#endif /*__ usart_H */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/