| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970 |
- /*
- * (C) Copyright 2012
- * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
- /*
- * Valid values for CONFIG_SYS_TEXT_BASE are:
- * 0xFC000000 boot low boot high (standard configuration)
- * 0x00100000 boot from RAM (for testing only)
- */
- #ifndef CONFIG_SYS_TEXT_BASE
- #define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */
- #endif
- /* Board specific flash config */
- #define CONFIG_SYS_FLASH_BASE 0xfc000000
- #define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */
- /* max number of sectors on one chip */
- #define CONFIG_SYS_MAX_FLASH_SECT 512
- /*
- * Include common defines for all ifm boards
- */
- #include "o2dnt-common.h"
- /* Additional commands */
- #define CONFIG_CMD_BSP
- #define CONFIG_CMD_REGINFO
- /*
- * GPIO configuration:
- * no CAN + no PCI
- */
- #define CONFIG_SYS_GPS_PORT_CONFIG 0x0000A000
- /* Other board specific configs */
- #define CONFIG_SYS_BOOTCS_CFG 0x00057d01
- #define CONFIG_SYS_RESET_ADDRESS 0xfc000000
- #define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
- #define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */
- #define CONFIG_BOARD_NAME "o3dnt"
- #define CONFIG_BOARD_BOOTCMD "run flash_self"
- #define CONFIG_BOARD_MEM_LIMIT __stringify(62)
- #define BOARD_POST_CRC32_END __stringify(0x01000000)
- #define CONFIG_EXTRA_ENV_SETTINGS \
- CONFIG_IFM_DEFAULT_ENV_SETTINGS \
- CONFIG_IFM_DEFAULT_ENV_OLD \
- CONFIG_IFM_DEFAULT_ENV_NEW \
- "linbot=fc060000\0" \
- "lintop=fc15ffff\0" \
- "rambot=fc160000\0" \
- "ramtop=fc55ffff\0" \
- "jffbot=fc560000\0" \
- "jfftop=fce5ffff\0" \
- "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \
- "ubotop=fc03ffff\0" \
- "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \
- "calbot=fce60000\0" \
- "caltop=fcffffff\0" \
- "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};" \
- "cp.b ${fileaddr} ${calbot} ${filesize}\0" \
- "kernel_addr=0xfc060000\0" \
- "ramdisk_addr=0xfc160000\0" \
- "master=mw f0000b00 0x0005A006;mw f0000b0c ${IOpin};" \
- "mw f0000b04 ${IOpin};mw f0000b10 0x20\0"
|
