| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465 |
- /*
- * (C) Copyright 2009
- * Stefano Babic DENX Software Engineering sbabic@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- *
- * Refer doc/README.imximage for more details about how-to configure
- * and create imximage boot image
- *
- * The syntax is taken as close as possible with the kwbimage
- */
- /*
- * Boot Device : one of
- * spi, sd (the board has no nand neither onenand)
- */
- BOOT_FROM sd
- /*
- * Device Configuration Data (DCD)
- *
- * Each entry must have the format:
- * Addr-type Address Value
- *
- * where:
- * Addr-type register length (1,2 or 4 bytes)
- * Address absolute address of the register
- * value value to be stored in the register
- */
- /* EIM config-CS5 init -- CPLD */
- DATA 4 0xB8002050 0x0000D843
- DATA 4 0xB8002054 0x22252521
- DATA 4 0xB8002058 0x22220A00
- /* DDR2 init */
- DATA 4 0xB8001004 0x0076E83A
- DATA 4 0xB8001010 0x00000204
- DATA 4 0xB8001000 0x92210000
- DATA 4 0x80000f00 0x12344321
- DATA 4 0xB8001000 0xB2210000
- DATA 1 0x82000000 0xda
- DATA 1 0x83000000 0xda
- DATA 1 0x81000400 0xda
- DATA 1 0x80000333 0xda
- DATA 4 0xB8001000 0x92210000
- DATA 1 0x80000400 0x12345678
- DATA 4 0xB8001000 0xA2210000
- DATA 4 0x80000000 0x87654321
- DATA 4 0x80000000 0x87654321
- DATA 4 0xB8001000 0xB2210000
- DATA 1 0x80000233 0xda
- DATA 1 0x81000780 0xda
- DATA 1 0x81000400 0xda
- DATA 4 0xB8001000 0x82216080
- DATA 4 0x43FAC454 0x00001000
- DATA 4 0x53F80008 0x20034000
- /* Enable the clocks */
- DATA 4 0x53f8000c 0x1fffffff
- DATA 4 0x53f80010 0xffffffff
- DATA 4 0x53f80014 0xfdfff
|
