dev.h 4.9 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174
  1. /*
  2. * linux/can/dev.h
  3. *
  4. * Definitions for the CAN network device driver interface
  5. *
  6. * Copyright (C) 2006 Andrey Volkov <avolkov@varma-el.com>
  7. * Varma Electronics Oy
  8. *
  9. * Copyright (C) 2008 Wolfgang Grandegger <wg@grandegger.com>
  10. *
  11. */
  12. #ifndef _CAN_DEV_H
  13. #define _CAN_DEV_H
  14. #include <linux/can.h>
  15. #include <linux/can/error.h>
  16. #include <linux/can/led.h>
  17. #include <linux/can/netlink.h>
  18. #include <linux/netdevice.h>
  19. /*
  20. * CAN mode
  21. */
  22. enum can_mode {
  23. CAN_MODE_STOP = 0,
  24. CAN_MODE_START,
  25. CAN_MODE_SLEEP
  26. };
  27. /*
  28. * CAN common private data
  29. */
  30. struct can_priv {
  31. struct net_device *dev;
  32. struct can_device_stats can_stats;
  33. struct can_bittiming bittiming, data_bittiming;
  34. const struct can_bittiming_const *bittiming_const,
  35. *data_bittiming_const;
  36. struct can_clock clock;
  37. unsigned int max_bitrate;
  38. enum can_state state;
  39. /* CAN controller features - see include/uapi/linux/can/netlink.h */
  40. u32 ctrlmode; /* current options setting */
  41. u32 ctrlmode_supported; /* options that can be modified by netlink */
  42. u32 ctrlmode_static; /* static enabled options for driver/hardware */
  43. int restart_ms;
  44. struct delayed_work restart_work;
  45. int (*do_set_bittiming)(struct net_device *dev);
  46. int (*do_set_data_bittiming)(struct net_device *dev);
  47. int (*do_set_mode)(struct net_device *dev, enum can_mode mode);
  48. int (*do_get_state)(const struct net_device *dev,
  49. enum can_state *state);
  50. int (*do_get_berr_counter)(const struct net_device *dev,
  51. struct can_berr_counter *bec);
  52. unsigned int echo_skb_max;
  53. struct sk_buff **echo_skb;
  54. #ifdef CONFIG_CAN_LEDS
  55. struct led_trigger *tx_led_trig;
  56. char tx_led_trig_name[CAN_LED_NAME_SZ];
  57. struct led_trigger *rx_led_trig;
  58. char rx_led_trig_name[CAN_LED_NAME_SZ];
  59. struct led_trigger *rxtx_led_trig;
  60. char rxtx_led_trig_name[CAN_LED_NAME_SZ];
  61. #endif
  62. };
  63. /*
  64. * get_can_dlc(value) - helper macro to cast a given data length code (dlc)
  65. * to __u8 and ensure the dlc value to be max. 8 bytes.
  66. *
  67. * To be used in the CAN netdriver receive path to ensure conformance with
  68. * ISO 11898-1 Chapter 8.4.2.3 (DLC field)
  69. */
  70. #define get_can_dlc(i) (min_t(__u8, (i), CAN_MAX_DLC))
  71. #define get_canfd_dlc(i) (min_t(__u8, (i), CANFD_MAX_DLC))
  72. /* Drop a given socketbuffer if it does not contain a valid CAN frame. */
  73. static inline bool can_dropped_invalid_skb(struct net_device *dev,
  74. struct sk_buff *skb)
  75. {
  76. const struct canfd_frame *cfd = (struct canfd_frame *)skb->data;
  77. if (skb->protocol == htons(ETH_P_CAN)) {
  78. if (unlikely(skb->len != CAN_MTU ||
  79. cfd->len > CAN_MAX_DLEN))
  80. goto inval_skb;
  81. } else if (skb->protocol == htons(ETH_P_CANFD)) {
  82. if (unlikely(skb->len != CANFD_MTU ||
  83. cfd->len > CANFD_MAX_DLEN))
  84. goto inval_skb;
  85. } else
  86. goto inval_skb;
  87. return false;
  88. inval_skb:
  89. kfree_skb(skb);
  90. dev->stats.tx_dropped++;
  91. return true;
  92. }
  93. static inline bool can_is_canfd_skb(const struct sk_buff *skb)
  94. {
  95. /* the CAN specific type of skb is identified by its data length */
  96. return skb->len == CANFD_MTU;
  97. }
  98. /* helper to define static CAN controller features at device creation time */
  99. static inline void can_set_static_ctrlmode(struct net_device *dev,
  100. u32 static_mode)
  101. {
  102. struct can_priv *priv = netdev_priv(dev);
  103. /* alloc_candev() succeeded => netdev_priv() is valid at this point */
  104. priv->ctrlmode = static_mode;
  105. priv->ctrlmode_static = static_mode;
  106. /* override MTU which was set by default in can_setup()? */
  107. if (static_mode & CAN_CTRLMODE_FD)
  108. dev->mtu = CANFD_MTU;
  109. }
  110. /* get data length from can_dlc with sanitized can_dlc */
  111. u8 can_dlc2len(u8 can_dlc);
  112. /* map the sanitized data length to an appropriate data length code */
  113. u8 can_len2dlc(u8 len);
  114. struct net_device *alloc_candev(int sizeof_priv, unsigned int echo_skb_max);
  115. void free_candev(struct net_device *dev);
  116. /* a candev safe wrapper around netdev_priv */
  117. struct can_priv *safe_candev_priv(struct net_device *dev);
  118. int open_candev(struct net_device *dev);
  119. void close_candev(struct net_device *dev);
  120. int can_change_mtu(struct net_device *dev, int new_mtu);
  121. int register_candev(struct net_device *dev);
  122. void unregister_candev(struct net_device *dev);
  123. int can_restart_now(struct net_device *dev);
  124. void can_bus_off(struct net_device *dev);
  125. void can_change_state(struct net_device *dev, struct can_frame *cf,
  126. enum can_state tx_state, enum can_state rx_state);
  127. void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev,
  128. unsigned int idx);
  129. unsigned int can_get_echo_skb(struct net_device *dev, unsigned int idx);
  130. void can_free_echo_skb(struct net_device *dev, unsigned int idx);
  131. #ifdef CONFIG_OF
  132. void of_can_transceiver(struct net_device *dev);
  133. #else
  134. static inline void of_can_transceiver(struct net_device *dev) { }
  135. #endif
  136. struct sk_buff *alloc_can_skb(struct net_device *dev, struct can_frame **cf);
  137. struct sk_buff *alloc_canfd_skb(struct net_device *dev,
  138. struct canfd_frame **cfd);
  139. struct sk_buff *alloc_can_err_skb(struct net_device *dev,
  140. struct can_frame **cf);
  141. #endif /* !_CAN_DEV_H */