csu3_am335x/EVSE/GPL/tpm2-tools-5.1/man/man1/tpm2_policyauthorizenv.1

.\" Automatically generated by Pandoc 1.19.2.4
.\"
.TH "tpm2_policyauthorizenv" "1" "" "tpm2\-tools" "General Commands Manual"
.hy
.SH NAME
.PP
\f[B]tpm2_policyauthorizenv\f[](1) \- Allows for mutable policies by
referencing to a policy from an NV index.
.SH SYNOPSIS
.PP
\f[B]tpm2_policyauthorizenv\f[] [\f[I]OPTIONS\f[]] [\f[I]ARGUMENT\f[]]
.SH DESCRIPTION
.PP
\f[B]tpm2_policyauthorizenv\f[](1) \- This command allows for policies
to change by referencing the authorization policy written to an NV
index.
The NV index containing the authorization policy should remain readable
even for trial session.
The index can be specified as raw handle or an offset value to the nv
handle range "TPM2_HR_NV_INDEX".
.SH OPTIONS
.IP \[bu] 2
\f[B]\-C\f[], \f[B]\-\-hierarchy\f[]=\f[I]OBJECT\f[]:
.RS 2
Specifies the hierarchy used to authorize.
Supported options are:
.IP \[bu] 2
\f[B]o\f[] for \f[B]TPM_RH_OWNER\f[]
.IP \[bu] 2
\f[B]p\f[] for \f[B]TPM_RH_PLATFORM\f[]
.IP \[bu] 2
\f[B]\f[C]<num>\f[]\f[] where a hierarchy handle or nv\-index may be
used.
.PP
When \f[B]\-C\f[] isn\[aq]t explicitly passed the index handle will be
used to authorize against the index.
The index auth value is set via the \f[B]\-p\f[] option to
\f[B]tpm2_nvdefine\f[](1).
.RE
.IP \[bu] 2
\f[B]\-P\f[], \f[B]\-\-auth\f[]=\f[I]AUTH\f[]:
.RS 2
.PP
Specifies the authorization value for the hierarchy.
.RE
.IP \[bu] 2
\f[B]\-L\f[], \f[B]\-\-policy\f[]=\f[I]FILE\f[]:
.RS 2
.PP
File to save the policy digest.
.RE
.IP \[bu] 2
\f[B]\-S\f[], \f[B]\-\-session\f[]=\f[I]FILE\f[]:
.RS 2
.PP
The policy session file generated via the \f[B]\-S\f[] option to
\f[B]tpm2_startauthsession\f[](1).
.RE
.IP \[bu] 2
\f[B]\-\-cphash\f[]=\f[I]FILE\f[]
.RS 2
.PP
File path to record the hash of the command parameters.
This is commonly termed as cpHash.
NOTE: When this option is selected, The tool will not actually execute
the command, it simply returns a cpHash.
.RE
.SS References
.SH COMMON OPTIONS
.PP
This collection of options are common to many programs and provide
information that many users may expect.
.IP \[bu] 2
\f[B]\-h\f[], \f[B]\-\-help=[man|no\-man]\f[]: Display the tools
manpage.
By default, it attempts to invoke the manpager for the tool, however, on
failure will output a short tool summary.
This is the same behavior if the "man" option argument is specified,
however if explicit "man" is requested, the tool will provide errors
from man on stderr.
If the "no\-man" option if specified, or the manpager fails, the short
options will be output to stdout.
.RS 2
.PP
To successfully use the manpages feature requires the manpages to be
installed or on \f[I]MANPATH\f[], See man(1) for more details.
.RE
.IP \[bu] 2
\f[B]\-v\f[], \f[B]\-\-version\f[]: Display version information for this
tool, supported tctis and exit.
.IP \[bu] 2
\f[B]\-V\f[], \f[B]\-\-verbose\f[]: Increase the information that the
tool prints to the console during its execution.
When using this option the file and line number are printed.
.IP \[bu] 2
\f[B]\-Q\f[], \f[B]\-\-quiet\f[]: Silence normal tool output to stdout.
.IP \[bu] 2
\f[B]\-Z\f[], \f[B]\-\-enable\-errata\f[]: Enable the application of
errata fixups.
Useful if an errata fixup needs to be applied to commands sent to the
TPM.
Defining the environment TPM2TOOLS_ENABLE_ERRATA is equivalent.
information many users may expect.
.SH TCTI Configuration
.PP
The TCTI or "Transmission Interface" is the communication mechanism with
the TPM.
TCTIs can be changed for communication with TPMs across different
mediums.
.PP
To control the TCTI, the tools respect:
.IP "1." 3
The command line option \f[B]\-T\f[] or \f[B]\-\-tcti\f[]
.IP "2." 3
The environment variable: \f[I]TPM2TOOLS_TCTI\f[].
.PP
\f[B]Note:\f[] The command line option always overrides the environment
variable.
.PP
The current known TCTIs are:
.IP \[bu] 2
tabrmd \- The resource manager, called
tabrmd (https://github.com/tpm2-software/tpm2-abrmd).
Note that tabrmd and abrmd as a tcti name are synonymous.
.IP \[bu] 2
mssim \- Typically used for communicating to the TPM software simulator.
.IP \[bu] 2
device \- Used when talking directly to a TPM device file.
.IP \[bu] 2
none \- Do not initalize a connection with the TPM.
Some tools allow for off\-tpm options and thus support not using a TCTI.
Tools that do not support it will error when attempted to be used
without a TCTI connection.
Does not support \f[I]ANY\f[] options and \f[I]MUST BE\f[] presented as
the exact text of "none".
.PP
The arguments to either the command line option or the environment
variable are in the form:
.PP
\f[C]<tcti\-name>:<tcti\-option\-config>\f[]
.PP
Specifying an empty string for either the \f[C]<tcti\-name>\f[] or
\f[C]<tcti\-option\-config>\f[] results in the default being used for
that portion respectively.
.SS TCTI Defaults
.PP
When a TCTI is not specified, the default TCTI is searched for using
\f[I]dlopen(3)\f[] semantics.
The tools will search for \f[I]tabrmd\f[], \f[I]device\f[] and
\f[I]mssim\f[] TCTIs \f[B]IN THAT ORDER\f[] and \f[B]USE THE FIRST ONE
FOUND\f[].
You can query what TCTI will be chosen as the default by using the
\f[B]\-v\f[] option to print the version information.
The "default\-tcti" key\-value pair will indicate which of the
aforementioned TCTIs is the default.
.SS Custom TCTIs
.PP
Any TCTI that implements the dynamic TCTI interface can be loaded.
The tools internally use \f[I]dlopen(3)\f[], and the raw
\f[I]tcti\-name\f[] value is used for the lookup.
Thus, this could be a path to the shared library, or a library name as
understood by \f[I]dlopen(3)\f[] semantics.
.SH TCTI OPTIONS
.PP
This collection of options are used to configure the various known TCTI
modules available:
.IP \[bu] 2
\f[B]device\f[]: For the device TCTI, the TPM character device file for
use by the device TCTI can be specified.
The default is \f[I]/dev/tpm0\f[].
.RS 2
.PP
Example: \f[B]\-T device:/dev/tpm0\f[] or \f[B]export
\f[I]TPM2TOOLS_TCTI\f[]="device:/dev/tpm0"\f[]
.RE
.IP \[bu] 2
\f[B]mssim\f[]: For the mssim TCTI, the domain name or IP address and
port number used by the simulator can be specified.
The default are 127.0.0.1 and 2321.
.RS 2
.PP
Example: \f[B]\-T mssim:host=localhost,port=2321\f[] or \f[B]export
\f[I]TPM2TOOLS_TCTI\f[]="mssim:host=localhost,port=2321"\f[]
.RE
.IP \[bu] 2
\f[B]abrmd\f[]: For the abrmd TCTI, the configuration string format is a
series of simple key value pairs separated by a \[aq],\[aq] character.
Each key and value string are separated by a \[aq]=\[aq] character.
.RS 2
.IP \[bu] 2
TCTI abrmd supports two keys:
.RS 2
.IP "1." 3
\[aq]bus_name\[aq] : The name of the tabrmd service on the bus (a
string).
.IP "2." 3
\[aq]bus_type\[aq] : The type of the dbus instance (a string) limited to
\[aq]session\[aq] and \[aq]system\[aq].
.RE
.PP
Specify the tabrmd tcti name and a config string of
\f[C]bus_name=com.example.FooBar\f[]:
.PP
\f[C]\\\-\-tcti=tabrmd:bus_name=com.example.FooBar\f[]
.PP
Specify the default (abrmd) tcti and a config string of
\f[C]bus_type=session\f[]:
.PP
\f[C]\\\-\-tcti:bus_type=session\f[]
.PP
\f[B]NOTE\f[]: abrmd and tabrmd are synonymous.
the various known TCTI modules.
.RE
.SH EXAMPLES
.PP
Create a policypassword and write the policy digest to an NV Index.
Build a policyauthorizenv policy referencing the NV index in a
\f[I]trial\f[] session.
The resultant policy digest is then used in creation of objects.
.PP
In a policy authorization session, first satisfy the policy written to
the NV index.
Then run the policyauthorizenv which satisfies the authorization for the
object.
.SS Define the test NV Index to store the auth policy
.IP
.nf
\f[C]
nv_test_index=0x01500001
tpm2_nvdefine\ \-C\ o\ \-p\ nvpass\ $nv_test_index\ \-a\ "authread|authwrite"\ \-s\ 34
\f[]
.fi
.SS Define the auth policy
.IP
.nf
\f[C]
tpm2_startauthsession\ \-S\ session.ctx
tpm2_policypassword\ \-S\ session.ctx\ \-L\ policy.pass
tpm2_flushcontext\ session.ctx
\f[]
.fi
.SS Write the auth policy to the NV Index
.IP
.nf
\f[C]
echo\ "000b"\ |\ xxd\ \-p\ \-r\ |\ cat\ \-\ policy.pass\ |\ \\
tpm2_nvwrite\ \-C\ $nv_test_index\ \-P\ nvpass\ $nv_test_index\ \-i\-
\f[]
.fi
.SS Define the policyauthorizenv
.IP
.nf
\f[C]
tpm2_startauthsession\ \-S\ session.ctx
tpm2_policyauthorizenv\ \-S\ session.ctx\ \-C\ $nv_test_index\ \-P\ nvpass\ \\
\-L\ policyauthorizenv.1500001\ $nv_test_index
tpm2_flushcontext\ session.ctx
\f[]
.fi
.SS Create and load a sealing object with auth policy =
policyauthorizenv
.IP
.nf
\f[C]
tpm2_createprimary\ \-C\ o\ \-c\ prim.ctx

echo\ "secretdata"\ |\ \\
tpm2_create\ \-C\ prim.ctx\ \-u\ key.pub\ \-r\ key.priv\ \\
\-a\ "fixedtpm|fixedparent|adminwithpolicy"\ \-L\ policyauthorizenv.1500001\ \-i\-

tpm2_load\ \-C\ prim.ctx\ \-u\ key.pub\ \-r\ key.priv\ \-c\ key.ctx
\f[]
.fi
.SS Satisfy the auth policy stored in the NV Index and thus
policyauthorizenv
.IP
.nf
\f[C]
tpm2_startauthsession\ \-S\ session.ctx\ \-\-policy\-session
tpm2_policypassword\ \-S\ session.ctx
tpm2_policyauthorizenv\ \-S\ session.ctx\ \-C\ $nv_test_index\ \-P\ nvpass\ $nv_test_index
tpm2_unseal\ \-c\ key.ctx\ \-p\ session:session.ctx
tpm2_flushcontext\ session.ctx
\f[]
.fi
.SH Returns
.PP
Tools can return any of the following codes:
.IP \[bu] 2
0 \- Success.
.IP \[bu] 2
1 \- General non\-specific error.
.IP \[bu] 2
2 \- Options handling error.
.IP \[bu] 2
3 \- Authentication error.
.IP \[bu] 2
4 \- TCTI related error.
.IP \[bu] 2
5 \- Non supported scheme.
Applicable to tpm2_testparams.
.SH Limitations
.PP
It expects a session to be already established via
\f[B]tpm2_startauthsession\f[](1) and requires one of the following:
.IP \[bu] 2
direct device access
.IP \[bu] 2
extended session support with \f[B]tpm2\-abrmd\f[].
.PP
Without it, most resource managers \f[B]will not\f[] save session state
between command invocations.
.SH BUGS
.PP
Github Issues (https://github.com/tpm2-software/tpm2-tools/issues)
.SH HELP
.PP
See the Mailing List (https://lists.01.org/mailman/listinfo/tpm2)