csu3_am335x/EVSE/GPL/tpm2-tools-5.1/man/man1/tpm2_checkquote.1

.\" Automatically generated by Pandoc 1.19.2.4
.\"
.TH "tpm2_checkquote" "1" "" "tpm2\-tools" "General Commands Manual"
.hy
.SH NAME
.PP
\f[B]tpm2_checkquote\f[](1) \- Validates a quote provided by a TPM.
.SH SYNOPSIS
.PP
\f[B]tpm2_checkquote\f[] [\f[I]OPTIONS\f[]]
.SH DESCRIPTION
.PP
\f[B]tpm2_checkquote\f[](1) \- Uses the public portion of the provided
key to validate a quote generated by a TPM.
This will validate the signature against the quote message and, if
provided, verify that the qualifying data and PCR values match those in
the quote.
The PCR values can be provided with or without the TPML_PCR_SELECTION
information.
An example of PCR values without the PCR selection information is the
output from \f[B]tpm2_pcrread\f[].
If PCR value is specified without the PCR selection information, then
the PCR selection string must be specified using the \f[B]\-l\f[] option
to interpret the PCR data.
.SH OPTIONS
.IP \[bu] 2
\f[B]\-u\f[], \f[B]\-\-public\f[]=\f[I]FILE\f[]:
.RS 2
.PP
File input for the public portion of the signature verification key.
Either the \f[I]pem\f[] file or \f[I]tss\f[] public format file.
.RE
.IP \[bu] 2
\f[B]\-g\f[], \f[B]\-\-hash\-algorithm\f[]=\f[I]ALGORITHM\f[]:
.RS 2
.PP
The hash algorithm used to digest the message.
.RE
.IP \[bu] 2
\f[B]\-m\f[], \f[B]\-\-message\f[]=\f[I]FILE\f[]:
.RS 2
.PP
The quote message that makes up the data that is signed by the TPM.
.RE
.IP \[bu] 2
\f[B]\-s\f[], \f[B]\-\-signature\f[]=\f[I]FILE\f[]:
.RS 2
.PP
The input signature file of the signature to be validated.
.RE
.IP \[bu] 2
\f[B]\-f\f[], \f[B]\-\-pcr\f[]=\f[I]FILE\f[]:
.RS 2
.PP
Optional PCR input file to save the list of PCR values that were
included in the quote.
.RE
.IP \[bu] 2
\f[B]\-l\f[], \f[B]\-\-pcr\-list\f[]=\f[I]PCR\f[]:
.RS 2
.PP
The list of PCR banks and selected PCRs\[aq] ids for each bank.
.RE
.IP \[bu] 2
\f[B]\-q\f[], \f[B]\-\-qualification\f[]=\f[I]HEX_STRING_OR_PATH\f[]:
.RS 2
.PP
Qualification data for the quote.
Can either be a hex string or path.
This is typically used to add a nonce against replay attacks.
.RE
.IP \[bu] 2
\f[B]\-F\f[], \f[B]\-\-format\f[]=\f[I]FORMAT\f[]:
.RS 2
.PP
\f[B]DEPRECATED\f[] and \f[B]IGNORED \f[] as it\[aq]s superfluous.
.RE
.SS References
.SH Algorithm Specifiers
.PP
Options that take algorithms support "nice\-names".
.PP
There are two major algorithm specification string classes, simple and
complex.
Only certain algorithms will be accepted by the TPM, based on usage and
conditions.
.SS Simple specifiers
.PP
These are strings with no additional specification data.
When creating objects, non\-specified portions of an object are assumed
to defaults.
You can find the list of known "Simple Specifiers Below".
.SS Asymmetric
.IP \[bu] 2
rsa
.IP \[bu] 2
ecc
.SS Symmetric
.IP \[bu] 2
aes
.IP \[bu] 2
camellia
.SS Hashing Algorithms
.IP \[bu] 2
sha1
.IP \[bu] 2
sha256
.IP \[bu] 2
sha384
.IP \[bu] 2
sha512
.IP \[bu] 2
sm3_256
.IP \[bu] 2
sha3_256
.IP \[bu] 2
sha3_384
.IP \[bu] 2
sha3_512
.SS Keyed Hash
.IP \[bu] 2
hmac
.IP \[bu] 2
xor
.SS Signing Schemes
.IP \[bu] 2
rsassa
.IP \[bu] 2
rsapss
.IP \[bu] 2
ecdsa
.IP \[bu] 2
ecdaa
.IP \[bu] 2
ecschnorr
.SS Asymmetric Encryption Schemes
.IP \[bu] 2
oaep
.IP \[bu] 2
rsaes
.IP \[bu] 2
ecdh
.SS Modes
.IP \[bu] 2
ctr
.IP \[bu] 2
ofb
.IP \[bu] 2
cbc
.IP \[bu] 2
cfb
.IP \[bu] 2
ecb
.SS Misc
.IP \[bu] 2
null
.SS Complex Specifiers
.PP
Objects, when specified for creation by the TPM, have numerous
algorithms to populate in the public data.
Things like type, scheme and asymmetric details, key size, etc.
Below is the general format for specifying this data:
\f[C]<type>:<scheme>:<symmetric\-details>\f[]
.SS Type Specifiers
.PP
This portion of the complex algorithm specifier is required.
The remaining scheme and symmetric details will default based on the
type specified and the type of the object being created.
.IP \[bu] 2
aes \- Default AES: aes128
.IP \[bu] 2
aes128\f[C]<mode>\f[] \- 128 bit AES with optional mode
(\f[I]ctr\f[]|\f[I]ofb\f[]|\f[I]cbc\f[]|\f[I]cfb\f[]|\f[I]ecb\f[]).
If mode is not specified, defaults to \f[I]null\f[].
.IP \[bu] 2
aes192\f[C]<mode>\f[] \- Same as aes128\f[C]<mode>\f[], except for a 192
bit key size.
.IP \[bu] 2
aes256\f[C]<mode>\f[] \- Same as aes128\f[C]<mode>\f[], except for a 256
bit key size.
.IP \[bu] 2
ecc \- Elliptical Curve, defaults to ecc256.
.IP \[bu] 2
ecc192 \- 192 bit ECC
.IP \[bu] 2
ecc224 \- 224 bit ECC
.IP \[bu] 2
ecc256 \- 256 bit ECC
.IP \[bu] 2
ecc384 \- 384 bit ECC
.IP \[bu] 2
ecc521 \- 521 bit ECC
.IP \[bu] 2
rsa \- Default RSA: rsa2048
.IP \[bu] 2
rsa1024 \- RSA with 1024 bit keysize.
.IP \[bu] 2
rsa2048 \- RSA with 2048 bit keysize.
.IP \[bu] 2
rsa4096 \- RSA with 4096 bit keysize.
.SS Scheme Specifiers
.PP
Next, is an optional field, it can be skipped.
.PP
Schemes are usually \f[B]Signing Schemes\f[] or \f[B]Asymmetric
Encryption Schemes\f[].
Most signing schemes take a hash algorithm directly following the
signing scheme.
If the hash algorithm is missing, it defaults to \f[I]sha256\f[].
Some take no arguments, and some take multiple arguments.
.SS Hash Optional Scheme Specifiers
.PP
These scheme specifiers are followed by a dash and a valid hash
algorithm, For example: \f[C]oaep\-sha256\f[].
.IP \[bu] 2
oaep
.IP \[bu] 2
ecdh
.IP \[bu] 2
rsassa
.IP \[bu] 2
rsapss
.IP \[bu] 2
ecdsa
.IP \[bu] 2
ecschnorr
.SS Multiple Option Scheme Specifiers
.PP
This scheme specifier is followed by a count (max size UINT16) then
followed by a dash(\-) and a valid hash algorithm.
* ecdaa For example, ecdaa4\-sha256.
If no count is specified, it defaults to 4.
.SS No Option Scheme Specifiers
.PP
This scheme specifier takes NO arguments.
* rsaes
.SS Symmetric Details Specifiers
.PP
This field is optional, and defaults based on the \f[I]type\f[] of
object being created and it\[aq]s attributes.
Generally, any valid \f[B]Symmetric\f[] specifier from the \f[B]Type
Specifiers\f[] list should work.
If not specified, an asymmetric objects symmetric details defaults to
\f[I]aes128cfb\f[].
.SS Examples
.SS Create an rsa2048 key with an rsaes asymmetric encryption scheme
.PP
\f[C]tpm2_create\ \-C\ parent.ctx\ \-G\ rsa2048:rsaes\ \-u\ key.pub\ \-r\ key.priv\f[]
.SS Create an ecc256 key with an ecdaa signing scheme with a count of 4
and sha384 hash
.PP
\f[C]/tpm2_create\ \-C\ parent.ctx\ \-G\ ecc256:ecdaa4\-sha384\ \-u\ key.pub\ \-r\ key.priv\f[]
cryptographic algorithms \f[I]ALGORITHM\f[].
.SH Signature Format Specifiers
.PP
Format selection for the signature output file.
\f[B]tss\f[] (the default) will output a binary blob according to the
TPM 2.0 specification and any potential compiler padding.
The option \f[B]plain\f[] will output the plain signature data as
defined by the used cryptographic algorithm.
signature \f[I]FORMAT\f[].
.SH COMMON OPTIONS
.PP
This collection of options are common to many programs and provide
information that many users may expect.
.IP \[bu] 2
\f[B]\-h\f[], \f[B]\-\-help=[man|no\-man]\f[]: Display the tools
manpage.
By default, it attempts to invoke the manpager for the tool, however, on
failure will output a short tool summary.
This is the same behavior if the "man" option argument is specified,
however if explicit "man" is requested, the tool will provide errors
from man on stderr.
If the "no\-man" option if specified, or the manpager fails, the short
options will be output to stdout.
.RS 2
.PP
To successfully use the manpages feature requires the manpages to be
installed or on \f[I]MANPATH\f[], See man(1) for more details.
.RE
.IP \[bu] 2
\f[B]\-v\f[], \f[B]\-\-version\f[]: Display version information for this
tool, supported tctis and exit.
.IP \[bu] 2
\f[B]\-V\f[], \f[B]\-\-verbose\f[]: Increase the information that the
tool prints to the console during its execution.
When using this option the file and line number are printed.
.IP \[bu] 2
\f[B]\-Q\f[], \f[B]\-\-quiet\f[]: Silence normal tool output to stdout.
.IP \[bu] 2
\f[B]\-Z\f[], \f[B]\-\-enable\-errata\f[]: Enable the application of
errata fixups.
Useful if an errata fixup needs to be applied to commands sent to the
TPM.
Defining the environment TPM2TOOLS_ENABLE_ERRATA is equivalent.
information many users may expect.
.SH TCTI Configuration
.PP
The TCTI or "Transmission Interface" is the communication mechanism with
the TPM.
TCTIs can be changed for communication with TPMs across different
mediums.
.PP
To control the TCTI, the tools respect:
.IP "1." 3
The command line option \f[B]\-T\f[] or \f[B]\-\-tcti\f[]
.IP "2." 3
The environment variable: \f[I]TPM2TOOLS_TCTI\f[].
.PP
\f[B]Note:\f[] The command line option always overrides the environment
variable.
.PP
The current known TCTIs are:
.IP \[bu] 2
tabrmd \- The resource manager, called
tabrmd (https://github.com/tpm2-software/tpm2-abrmd).
Note that tabrmd and abrmd as a tcti name are synonymous.
.IP \[bu] 2
mssim \- Typically used for communicating to the TPM software simulator.
.IP \[bu] 2
device \- Used when talking directly to a TPM device file.
.IP \[bu] 2
none \- Do not initalize a connection with the TPM.
Some tools allow for off\-tpm options and thus support not using a TCTI.
Tools that do not support it will error when attempted to be used
without a TCTI connection.
Does not support \f[I]ANY\f[] options and \f[I]MUST BE\f[] presented as
the exact text of "none".
.PP
The arguments to either the command line option or the environment
variable are in the form:
.PP
\f[C]<tcti\-name>:<tcti\-option\-config>\f[]
.PP
Specifying an empty string for either the \f[C]<tcti\-name>\f[] or
\f[C]<tcti\-option\-config>\f[] results in the default being used for
that portion respectively.
.SS TCTI Defaults
.PP
When a TCTI is not specified, the default TCTI is searched for using
\f[I]dlopen(3)\f[] semantics.
The tools will search for \f[I]tabrmd\f[], \f[I]device\f[] and
\f[I]mssim\f[] TCTIs \f[B]IN THAT ORDER\f[] and \f[B]USE THE FIRST ONE
FOUND\f[].
You can query what TCTI will be chosen as the default by using the
\f[B]\-v\f[] option to print the version information.
The "default\-tcti" key\-value pair will indicate which of the
aforementioned TCTIs is the default.
.SS Custom TCTIs
.PP
Any TCTI that implements the dynamic TCTI interface can be loaded.
The tools internally use \f[I]dlopen(3)\f[], and the raw
\f[I]tcti\-name\f[] value is used for the lookup.
Thus, this could be a path to the shared library, or a library name as
understood by \f[I]dlopen(3)\f[] semantics.
.SH TCTI OPTIONS
.PP
This collection of options are used to configure the various known TCTI
modules available:
.IP \[bu] 2
\f[B]device\f[]: For the device TCTI, the TPM character device file for
use by the device TCTI can be specified.
The default is \f[I]/dev/tpm0\f[].
.RS 2
.PP
Example: \f[B]\-T device:/dev/tpm0\f[] or \f[B]export
\f[I]TPM2TOOLS_TCTI\f[]="device:/dev/tpm0"\f[]
.RE
.IP \[bu] 2
\f[B]mssim\f[]: For the mssim TCTI, the domain name or IP address and
port number used by the simulator can be specified.
The default are 127.0.0.1 and 2321.
.RS 2
.PP
Example: \f[B]\-T mssim:host=localhost,port=2321\f[] or \f[B]export
\f[I]TPM2TOOLS_TCTI\f[]="mssim:host=localhost,port=2321"\f[]
.RE
.IP \[bu] 2
\f[B]abrmd\f[]: For the abrmd TCTI, the configuration string format is a
series of simple key value pairs separated by a \[aq],\[aq] character.
Each key and value string are separated by a \[aq]=\[aq] character.
.RS 2
.IP \[bu] 2
TCTI abrmd supports two keys:
.RS 2
.IP "1." 3
\[aq]bus_name\[aq] : The name of the tabrmd service on the bus (a
string).
.IP "2." 3
\[aq]bus_type\[aq] : The type of the dbus instance (a string) limited to
\[aq]session\[aq] and \[aq]system\[aq].
.RE
.PP
Specify the tabrmd tcti name and a config string of
\f[C]bus_name=com.example.FooBar\f[]:
.PP
\f[C]\\\-\-tcti=tabrmd:bus_name=com.example.FooBar\f[]
.PP
Specify the default (abrmd) tcti and a config string of
\f[C]bus_type=session\f[]:
.PP
\f[C]\\\-\-tcti:bus_type=session\f[]
.PP
\f[B]NOTE\f[]: abrmd and tabrmd are synonymous.
the various known TCTI modules.
.RE
.SH EXAMPLES
.SS Generate a quote with a TPM, then verify it
.IP
.nf
\f[C]
tpm2_createek\ \-c\ 0x81010001\ \-G\ rsa\ \-u\ ekpub.pem\ \-f\ pem

tpm2_createak\ \-C\ 0x81010001\ \-c\ ak.ctx\ \-G\ rsa\ \-s\ rsassa\ \-g\ sha256\ \\
\-u\ akpub.pem\ \-f\ pem\ \-n\ ak.name

tpm2_quote\ \-c\ ak.ctx\ \-l\ sha256:15,16,22\ \-q\ abc123\ \-m\ quote.msg\ \-s\ quote.sig\ \\
\ \ \-o\ quote.pcrs\ \-g\ sha256

tpm2_checkquote\ \-u\ akpub.pem\ \-m\ quote.msg\ \-s\ quote.sig\ \-f\ quote.pcrs\ \-g\ sha256\ \\
\ \ \-q\ abc123
\f[]
.fi
.SH Returns
.PP
Tools can return any of the following codes:
.IP \[bu] 2
0 \- Success.
.IP \[bu] 2
1 \- General non\-specific error.
.IP \[bu] 2
2 \- Options handling error.
.IP \[bu] 2
3 \- Authentication error.
.IP \[bu] 2
4 \- TCTI related error.
.IP \[bu] 2
5 \- Non supported scheme.
Applicable to tpm2_testparams.
.SH BUGS
.PP
Github Issues (https://github.com/tpm2-software/tpm2-tools/issues)
.SH HELP
.PP
See the Mailing List (https://lists.01.org/mailman/listinfo/tpm2)