csu3_am335x/EVSE/GPL/open-plc-utils-0.3/plc/int6kmdio.c

/*====================================================================*
 *
 *   Copyright (c) 2013 Qualcomm Atheros, Inc.
 *
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or
 *   without modification, are permitted (subject to the limitations
 *   in the disclaimer below) provided that the following conditions
 *   are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials
 *     provided with the distribution.
 *
 *   * Neither the name of Qualcomm Atheros nor the names of
 *     its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written
 *     permission.
 *
 *   NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
 *   GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE
 *   COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
 *   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 *   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 *   PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
 *   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *   NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 *   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 *   OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 *   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *--------------------------------------------------------------------*/

/*====================================================================*
 *
 *   int6kmdio.c - Atheros Powerline PHY Register Editor
 *
 *
 *   Contributor(s):
 *      Charles Maier
 *
 *--------------------------------------------------------------------*/

/*====================================================================*"
 *   system header files;
 *--------------------------------------------------------------------*/

#include <unistd.h>
#include <stdlib.h>
#include <string.h>
#include <ctype.h>

/*====================================================================*
 *   custom header files;
 *--------------------------------------------------------------------*/

#include "../tools/getoptv.h"
#include "../tools/putoptv.h"
#include "../tools/memory.h"
#include "../tools/number.h"
#include "../tools/symbol.h"
#include "../tools/types.h"
#include "../tools/flags.h"
#include "../tools/files.h"
#include "../tools/error.h"
#include "../plc/plc.h"
#include "../ram/nvram.h"
#include "../ram/sdram.h"
#include "../nvm/nvm.h"
#include "../pib/pib.h"
#include "../mme/mme.h"

/*====================================================================*
 *   custom source files;
 *--------------------------------------------------------------------*/

#ifndef MAKEFILE
#include "../plc/Devices.c"
#include "../plc/Display.c"
#include "../mme/UnwantedMessage.c"
#endif

#ifndef MAKEFILE
#include "../tools/getoptv.c"
#include "../tools/putoptv.c"
#include "../tools/version.c"
#include "../tools/uintspec.c"
#include "../tools/hexencode.c"
#include "../tools/hexdecode.c"
#include "../tools/todigit.c"
#include "../tools/hexdump.c"
#include "../tools/hexview.c"
#include "../tools/regview32.c"
#include "../tools/synonym.c"
#include "../tools/error.c"
#endif

#ifndef MAKEFILE
#include "../ether/channel.c"
#include "../ether/openchannel.c"
#include "../ether/closechannel.c"
#include "../ether/readpacket.c"
#include "../ether/sendpacket.c"
#endif

#ifndef MAKEFILE
#include "../mme/EthernetHeader.c"
#include "../mme/QualcommHeader.c"
#include "../mme/MMECode.c"
#endif

/*====================================================================*
 *   program constants;
 *--------------------------------------------------------------------*/

#define INT6KMDIO_RELATIVE (1 << 0)
#define INT6KMDIO_ABSOLUTE (1 << 1)
#define INT6KMDIO_REGISTER (1 << 2)
#define INT6KMDIO_HEADINGS (1 << 3)
#define INT6KMDIO_WRITE (1 << 4)

/*====================================================================*
 *
 *   void function (struct channel * channel, uint32_t offset, uint32_t length, flag_t flags);
 *
 *
 *
 *--------------------------------------------------------------------*/

static void function (struct channel * channel, uint8_t mode, uint8_t phy, uint8_t reg, uint16_t data)

{
	struct message message;
	signed packetsize;

#ifndef __GNUC__
#pragma pack (push,1)
#endif

	struct __packed vs_mdio_command_request
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t OPERATION;
		uint8_t PHY;
		uint8_t REG;
		uint16_t DATA;
	}
	* request = (struct vs_mdio_command_request *)(&message);
	struct __packed vs_mdio_command_confirm
	{
		struct ethernet_hdr ethernet;
		struct qualcomm_hdr qualcomm;
		uint8_t MSTATUS;
		uint16_t DATA;
		uint8_t PHY;
		uint8_t REG;
	}
	* confirm = (struct vs_mdio_command_confirm *)(&message);

#ifndef __GNUC__
#pragma pack (pop)
#endif

	memset (&message, 0, sizeof (message));
	EthernetHeader (&request->ethernet, channel->peer, channel->host, channel->type);
	QualcommHeader (&request->qualcomm, 0, (VS_MDIO_COMMAND | MMTYPE_REQ));
	request->OPERATION = mode;
	request->PHY = phy;
	request->REG = reg;
	request->DATA = HTOLE16 (data);
	if (sendpacket (channel, &message, (ETHER_MIN_LEN - ETHER_CRC_LEN)) == -1)
	{
		error (1, errno, CHANNEL_CANTSEND);
	}
	while ((packetsize = readpacket (channel, &message, sizeof (message))) > 0)
	{
		if (UnwantedMessage (&message, packetsize, 0, (VS_MDIO_COMMAND | MMTYPE_CNF)))
		{
			continue;
		}
		if (confirm->MSTATUS)
		{
			error (0, 0, "%s (%0X): %s", MMECode (confirm->qualcomm.MMTYPE, confirm->MSTATUS), confirm->MSTATUS, PLC_WONTDOIT);
			continue;
		}
		printf (" phy 0x%02X", confirm->PHY);
		printf (" reg 0x%02X", confirm->REG);
		printf (" data 0x%04X", confirm->DATA);
		printf ("\n");
	}
	return;
}


/*====================================================================*
 *
 *   int main (int argc, char const * argv []);
 *
 *
 *
 *--------------------------------------------------------------------*/

int main (int argc, char const * argv [])

{
	extern struct channel channel;
	static char const * optv [] =
	{
		"d:ei:p:qr:v",
		"[device] [...]",
		"Qualcomm Atheros 16-bit MDIO Register Editor",
		"d n\tdata value is (n) [0x0000]",
		"e\tredirect stderr to stdout",

#if defined (WINPCAP) || defined (LIBPCAP)

		"i n\thost interface is (n) [" LITERAL (CHANNEL_ETHNUMBER) "]",

#else

		"i s\thost interface is (s) [" LITERAL (CHANNEL_ETHDEVICE) "]",

#endif

		"p n\tPHY number (n) [0xFF]",
		"q\tquiet mode",
		"r n\tregister number (n) [0xFF]",
		"v\tverbose mode",
		(char const *) (0)
	};
	uint8_t mode = 0;
	uint8_t phy = 0;
	uint8_t reg = 0;
	uint16_t data = 0;
	signed c;
	if (getenv (PLCDEVICE))
	{

#if defined (WINPCAP) || defined (LIBPCAP)

		channel.ifindex = atoi (getenv (PLCDEVICE));

#else

		channel.ifname = strdup (getenv (PLCDEVICE));

#endif

	}
	optind = 1;
	while ((c = getoptv (argc, argv, optv)) != -1)
	{
		switch (c)
		{
		case 'd':
			mode = 1;
			data = (uint16_t)(uintspec (optarg, 0, 0xFFFF));
			break;
		case 'e':
			dup2 (STDOUT_FILENO, STDERR_FILENO);
			break;
		case 'i':

#if defined (WINPCAP) || defined (LIBPCAP)

			channel.ifindex = atoi (optarg);

#else

			channel.ifname = optarg;

#endif

			break;
		case 'p':
			phy = (uint8_t)(uintspec (optarg, 0, 0x1F));
			break;
		case 'q':
			_setbits (channel.flags, CHANNEL_SILENCE);
			break;
		case 'r':
			reg = (uint8_t)(uintspec (optarg, 0, 0x1F));
			break;
		case 'v':
			_setbits (channel.flags, CHANNEL_VERBOSE);
			break;
		default:
			break;
		}
	}
	argc -= optind;
	argv += optind;
	openchannel (&channel);
	if (!argc)
	{
		function (&channel, mode, phy, reg, data);
	}
	while ((argc) && (* argv))
	{
		if (!hexencode (channel.peer, sizeof (channel.peer), synonym (* argv, devices, SIZEOF (devices))))
		{
			error (1, errno, PLC_BAD_MAC, * argv);
		}
		function (&channel, mode, phy, reg, data);
		argv++;
		argc--;
	}
	closechannel (&channel);
	return (0);
}