csu3_am335x/EVSE/GPL/open-plc-utils-0.3/plc/amptest.c

/*====================================================================*
 *
 *   Copyright (c) 2013 Qualcomm Atheros, Inc.
 *
 *   All rights reserved.
 *
 *   Redistribution and use in source and binary forms, with or
 *   without modification, are permitted (subject to the limitations
 *   in the disclaimer below) provided that the following conditions
 *   are met:
 *
 *   * Redistributions of source code must retain the above copyright
 *     notice, this list of conditions and the following disclaimer.
 *
 *   * Redistributions in binary form must reproduce the above
 *     copyright notice, this list of conditions and the following
 *     disclaimer in the documentation and/or other materials
 *     provided with the distribution.
 *
 *   * Neither the name of Qualcomm Atheros nor the names of
 *     its contributors may be used to endorse or promote products
 *     derived from this software without specific prior written
 *     permission.
 *
 *   NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
 *   GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE
 *   COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
 *   IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 *   WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 *   PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER
 *   OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *   NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 *   LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 *   HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 *   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
 *   OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 *   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *--------------------------------------------------------------------*/

/*====================================================================*"
 *
 *   amptest.c -
 *
 *
 *   Contributor(s):
 *      Charles Maier
 *
 *--------------------------------------------------------------------*/


/*====================================================================*"
 *   system header files;
 *--------------------------------------------------------------------*/

#include <unistd.h>
#include <stdlib.h>
#include <stdint.h>
#include <limits.h>
#include <errno.h>

/*====================================================================*
 *   custom header files;
 *--------------------------------------------------------------------*/

#include "../tools/getoptv.h"
#include "../tools/putoptv.h"
#include "../tools/memory.h"
#include "../tools/number.h"
#include "../tools/types.h"
#include "../tools/flags.h"
#include "../tools/files.h"
#include "../tools/error.h"
#include "../ether/channel.h"
#include "../ram/nvram.h"
#include "../ram/sdram.h"
#include "../nvm/nvm.h"
#include "../pib/pib.h"
#include "../plc/plc.h"

/*====================================================================*
 *   custom source files;
 *--------------------------------------------------------------------*/

#ifndef MAKEFILE
#include "../plc/chipset.c"
#include "../plc/Confirm.c"
#include "../plc/Devices.c"
#include "../plc/Display.c"
#include "../plc/ExecuteApplets1.c"
#include "../plc/Failure.c"
#include "../plc/Request.c"
#include "../plc/SendMME.c"
#include "../plc/StartFirmware1.c"
#include "../plc/WaitForStart.c"
#include "../plc/WriteExecuteFirmware1.c"
#include "../plc/WriteFirmware1.c"
#include "../plc/NVMSelect.c"
#endif

#ifndef MAKEFILE
#include "../tools/getoptv.c"
#include "../tools/putoptv.c"
#include "../tools/version.c"
#include "../tools/uintspec.c"
#include "../tools/checkfilename.c"
#include "../tools/hexdecode.c"
#include "../tools/todigit.c"
#include "../tools/hexdump.c"
#include "../tools/checksum32.c"
#include "../tools/fdchecksum32.c"
#include "../tools/error.c"
#include "../tools/strfbits.c"
#include "../tools/typename.c"
#endif

#ifndef MAKEFILE
#include "../ether/openchannel.c"
#include "../ether/closechannel.c"
#include "../ether/readpacket.c"
#include "../ether/sendpacket.c"
#include "../ether/channel.c"
#endif

#ifndef MAKEFILE
#include "../nvm/nvmfile1.c"
#endif

#ifndef MAKEFILE
#include "../mme/EthernetHeader.c"
#include "../mme/QualcommHeader.c"
#include "../mme/UnwantedMessage.c"
#include "../mme/FirmwareMessage.c"
#include "../mme/ARPCPrint.c"
#include "../mme/MMECode.c"
#endif

/*====================================================================*
 *
 *   signed ReadMME (struct plc * plc, uint8_t MMV, uint16_t MMTYPE);
 *
 *   plc.h
 *
 *   this version of ReadMME() calls FirmwareMessage() to intercept
 *   VS_ARPC messages and print them on stdout in readable format;
 *
 *
 *   Contributor(s):
 *      Charles Maier
 *      Matthieu Poullet
 *
 *--------------------------------------------------------------------*/

signed ReadMME (struct plc * plc, uint8_t MMV, uint16_t MMTYPE)

{
	struct channel * channel = (struct channel *)(plc->channel);
	struct message * message = (struct message *)(plc->message);
	while ((plc->packetsize = readpacket (channel, message, sizeof (* message))) > 0)
	{
		if (FirmwareMessage (message))
		{
			continue;
		}
		if (UnwantedMessage (message, plc->packetsize, MMV, MMTYPE))
		{
			continue;
		}
		break;
	}
	return (plc->packetsize);
}


/*====================================================================*
 *
 *   void sequence (struct plc * plc, int argc, char const * argv);
 *
 *   open each file on the command line and execute all applets in
 *   each file; exit program if I/O or execution errors occur;
 *
 *   this implementation calls functions nvmfile1 and ExecuteApplets1
 *   to read legacy NVM file formats only; see program plctest for
 *   the newer file formats;
 *
 *
 *   Contributor(s):
 *      Charles Maier
 *
 *--------------------------------------------------------------------*/

static void sequence (struct plc * plc, int argc, char const * argv [])

{
	while ((argc) && (* argv))
	{
		if ((plc->NVM.file = open (plc->NVM.name = * argv, O_BINARY|O_RDONLY)) == -1)
		{
			error (0, errno, FILE_CANTOPEN, plc->NVM.name);
		}
		else if (nvmfile1 (&plc->NVM))
		{
			error (0, errno, FILE_CANTLOAD, plc->NVM.name);
		}
		else
		{
			ExecuteApplets1 (plc);
		}
		close (plc->NVM.file);
		argc--;
		argv++;
	}
	return;
}


/*====================================================================*
 *
 *   int main (int argc, char const * argv[]);
 *
 *   parse command line, populate plc structure and perform selected
 *   operations; show help summary when asked; see getoptv and putoptv
 *   to understand command line parsing and help summary display; see
 *   plc.h for the definition of struct plc;
 *
 *   the default interface is eth1 because most people use eth0 as
 *   their principle network connection; you can specify another
 *   interface with -i or define environment string PLC to make
 *   that the default interface and save typing;
 *
 *
 *   Contributor(s):
 *      Charles Maier
 *
 *--------------------------------------------------------------------*/

int main (int argc, char const * argv [])

{
	extern struct channel channel;
	char firmware [PLC_VERSION_STRING];
	static char const * optv [] =
	{
		"ei:lqt:vw:xX",
		"file [file] [...]",
		"Qualcomm Atheros PLC Test Applet Loader",
		"e\tredirect stderr to stdout",

#if defined (WINPCAP) || defined (LIBPCAP)

		"i n\thost interface is (n) [" LITERAL (CHANNEL_ETHNUMBER) "]",

#else

		"i s\thost interface is (s) [" LITERAL (CHANNEL_ETHDEVICE) "]",

#endif

		"l\tloop until program is terminated",
		"q\tquiet mode",
		"t n\tread timeout is (n) milliseconds [" LITERAL (CHANNEL_TIMEOUT) "]",
		"v\tverbose mode",
		"w n\twait time is (n) seconds [" LITERAL (PLC_TIMER) "]",
		"x\texit on error",
		"X\texit on start",
		(char const *) (0)
	};

#include "../plc/plc.c"

	signed loop = 0;
	signed c;
	if (getenv (PLCDEVICE))
	{

#if defined (WINPCAP) || defined (LIBPCAP)

		channel.ifindex = atoi (getenv (PLCDEVICE));

#else

		channel.ifname = strdup (getenv (PLCDEVICE));

#endif

	}
	optind = 1;
	while ((c = getoptv (argc, argv, optv)) != -1)
	{
		switch (c)
		{
		case 'e':
			dup2 (STDOUT_FILENO, STDERR_FILENO);
			break;
		case 'i':

#if defined (WINPCAP) || defined (LIBPCAP)

			channel.ifindex = atoi (optarg);

#else

			channel.ifname = optarg;

#endif

			break;
		case 'l':
			loop = 1;
			break;
		case 'q':
			_setbits (channel.flags, CHANNEL_SILENCE);
			_setbits (plc.flags, PLC_SILENCE);
			break;
		case 't':
			channel.timeout = (signed)(uintspec (optarg, 0, UINT_MAX));
			break;
		case 'v':
			_setbits (channel.flags, CHANNEL_VERBOSE);
			_setbits (plc.flags, PLC_VERBOSE);
			break;
		case 'w':
			plc.timer = (unsigned)(uintspec (optarg, 0, 3600));
			break;
		case 'x':
			_setbits (plc.flags, PLC_BAILOUT);
			break;
		case 'X':
			_setbits (plc.flags, PLC_QUICK_FLASH);
			break;
		default:
			break;
		}
	}
	argc -= optind;
	argv += optind;
	openchannel (&channel);
	if (!(plc.message = malloc (sizeof (* plc.message))))
	{
		error (1, errno, PLC_NOMEMORY);
	}
	if (WaitForStart (&plc, firmware, sizeof (firmware)))
	{
		error (1, ECANCELED, PLC_NODETECT);
	}
	if (strcmp (firmware, "BootLoader"))
	{
		error (1, ECANCELED, "BootLoader must be running");
	}
	do
	{
		sequence (&plc, argc, argv);
	}
	while (loop);
	free (plc.message);
	closechannel (&channel);
	return (plc.state);
}