csu3_am335x/EVSE/GPL/busybox-1.28.1/miscutils/Config.in

# DO NOT EDIT. This file is generated from Config.src
#
# For a description of the syntax of this configuration file,
# see scripts/kbuild/config-language.txt.
#

menu "Miscellaneous Utilities"

config ADJTIMEX
	bool "adjtimex (4.5 kb)"
	default y
	select PLATFORM_LINUX
	help
	Adjtimex reads and optionally sets adjustment parameters for
	the Linux clock adjustment algorithm.
config BBCONFIG
	bool "bbconfig (9.7 kb)"
	default n
	help
	The bbconfig applet will print the config file with which
	busybox was built.

config FEATURE_COMPRESS_BBCONFIG
	bool "Compress bbconfig data"
	default y
	depends on BBCONFIG
	help
	Store bbconfig data in compressed form, uncompress them on-the-fly
	before output.

	If you have a really tiny busybox with few applets enabled (and
	bunzip2 isn't one of them), the overhead of the decompressor might
	be noticeable. Also, if you run executables directly from ROM
	and have very little memory, this might not be a win. Otherwise,
	you probably want this.
config BEEP
	bool "beep (3 kb)"
	default y
	select PLATFORM_LINUX
	help
	The beep applets beeps in a given freq/Hz.

config FEATURE_BEEP_FREQ
	int "default frequency"
	range 20 50000	# allowing 0 here breaks the build
	default 4000
	depends on BEEP
	help
	Frequency for default beep.

config FEATURE_BEEP_LENGTH_MS
	int "default length"
	range 0 2147483647
	default 30
	depends on BEEP
	help
	Length in ms for default beep.
config CHAT
	bool "chat (6.6 kb)"
	default y
	help
	Simple chat utility.

config FEATURE_CHAT_NOFAIL
	bool "Enable NOFAIL expect strings"
	depends on CHAT
	default y
	help
	When enabled expect strings which are started with a dash trigger
	no-fail mode. That is when expectation is not met within timeout
	the script is not terminated but sends next SEND string and waits
	for next EXPECT string. This allows to compose far more flexible
	scripts.

config FEATURE_CHAT_TTY_HIFI
	bool "Force STDIN to be a TTY"
	depends on CHAT
	default n
	help
	Original chat always treats STDIN as a TTY device and sets for it
	so-called raw mode. This option turns on such behaviour.

config FEATURE_CHAT_IMPLICIT_CR
	bool "Enable implicit Carriage Return"
	depends on CHAT
	default y
	help
	When enabled make chat to terminate all SEND strings with a "\r"
	unless "\c" is met anywhere in the string.

config FEATURE_CHAT_SWALLOW_OPTS
	bool "Swallow options"
	depends on CHAT
	default y
	help
	Busybox chat require no options. To make it not fail when used
	in place of original chat (which has a bunch of options) turn
	this on.

config FEATURE_CHAT_SEND_ESCAPES
	bool "Support weird SEND escapes"
	depends on CHAT
	default y
	help
	Original chat uses some escape sequences in SEND arguments which
	are not sent to device but rather performs special actions.
	E.g. "\K" means to send a break sequence to device.
	"\d" delays execution for a second, "\p" -- for a 1/100 of second.
	Before turning this option on think twice: do you really need them?

config FEATURE_CHAT_VAR_ABORT_LEN
	bool "Support variable-length ABORT conditions"
	depends on CHAT
	default y
	help
	Original chat uses fixed 50-bytes length ABORT conditions. Say N here.

config FEATURE_CHAT_CLR_ABORT
	bool "Support revoking of ABORT conditions"
	depends on CHAT
	default y
	help
	Support CLR_ABORT directive.
config CONSPY
	bool "conspy (10 kb)"
	default y
	select PLATFORM_LINUX
	help
	A text-mode VNC like program for Linux virtual terminals.
	example:  conspy NUM      shared access to console num
	or        conspy -nd NUM  screenshot of console num
	or        conspy -cs NUM  poor man's GNU screen like
config CROND
	bool "crond (13 kb)"
	default y
	select FEATURE_SYSLOG
	help
	Crond is a background daemon that parses individual crontab
	files and executes commands on behalf of the users in question.
	This is a port of dcron from slackware. It uses files of the
	format /var/spool/cron/crontabs/<username> files, for example:
		$ cat /var/spool/cron/crontabs/root
		# Run daily cron jobs at 4:40 every day:
		40 4 * * * /etc/cron/daily > /dev/null 2>&1

config FEATURE_CROND_D
	bool "Support -d (redirect output to stderr)"
	depends on CROND
	default y
	help
	-d N sets loglevel (0:most verbose) and directs all output to stderr.

config FEATURE_CROND_CALL_SENDMAIL
	bool "Report command output via email (using sendmail)"
	default y
	depends on CROND
	help
	Command output will be sent to corresponding user via email.

config FEATURE_CROND_SPECIAL_TIMES
	bool "Support special times (@reboot, @daily, etc) in crontabs"
	default y
	depends on CROND
	help
	string        meaning
	------        -------
	@reboot       Run once, at startup
	@yearly       Run once a year:  "0 0 1 1 *"
	@annually     Same as @yearly:  "0 0 1 1 *"
	@monthly      Run once a month: "0 0 1 * *"
	@weekly       Run once a week:  "0 0 * * 0"
	@daily        Run once a day:   "0 0 * * *"
	@midnight     Same as @daily:   "0 0 * * *"
	@hourly       Run once an hour: "0 * * * *"

config FEATURE_CROND_DIR
	string "crond spool directory"
	default "/var/spool/cron"
	depends on CROND || CRONTAB
	help
	Location of crond spool.
config CRONTAB
	bool "crontab (9.7 kb)"
	default y
	help
	Crontab manipulates the crontab for a particular user. Only
	the superuser may specify a different user and/or crontab directory.
	Note that busybox binary must be setuid root for this applet to
	work properly.
config DC
	bool "dc (4.2 kb)"
	default y
	help
	Dc is a reverse-polish desk calculator which supports unlimited
	precision arithmetic.

config FEATURE_DC_LIBM
	bool "Enable power and exp functions (requires libm)"
	default y
	depends on DC
	help
	Enable power and exp functions.
	NOTE: This will require libm to be present for linking.
config DEVFSD
	bool "devfsd (obsolete)"
	default n
	select PLATFORM_LINUX
	select FEATURE_SYSLOG
	help
	This is deprecated and should NOT be used anymore.
	Use linux >= 2.6 (optionally with hotplug) and mdev instead!
	See docs/mdev.txt for detailed instructions on how to use mdev
	instead.

	Provides compatibility with old device names on a devfs systems.
	You should set it to true if you have devfs enabled.
	The following keywords in devsfd.conf are supported:
	"CLEAR_CONFIG", "INCLUDE", "OPTIONAL_INCLUDE", "RESTORE",
	"PERMISSIONS", "EXECUTE", "COPY", "IGNORE",
	"MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT".

	But only if they are written UPPERCASE!!!!!!!!

config DEVFSD_MODLOAD
	bool "Adds support for MODLOAD keyword in devsfd.conf"
	default y
	depends on DEVFSD
	help
	This actually doesn't work with busybox modutils but needs
	the external modutils.

config DEVFSD_FG_NP
	bool "Enable the -fg and -np options"
	default y
	depends on DEVFSD
	help
	-fg  Run the daemon in the foreground.
	-np  Exit after parsing config. Do not poll for events.

config DEVFSD_VERBOSE
	bool "Increases logging (and size)"
	default y
	depends on DEVFSD
	help
	Increases logging to stderr or syslog.

config FEATURE_DEVFS
	bool "Use devfs names for all devices (obsolete)"
	default n
	select PLATFORM_LINUX
	help
	This is obsolete and should NOT be used anymore.
	Use linux >= 2.6 (optionally with hotplug) and mdev instead!

	For legacy systems -- if there is no way around devfsd -- this
	tells busybox to look for names like /dev/loop/0 instead of
	/dev/loop0. If your /dev directory has normal names instead of
	devfs names, you don't want this.
config DEVMEM
	bool "devmem (2.5 kb)"
	default y
	help
	devmem is a small program that reads and writes from physical
	memory using /dev/mem.
config FBSPLASH
	bool "fbsplash (27 kb)"
	default y
	select PLATFORM_LINUX
	help
	Shows splash image and progress bar on framebuffer device.
	Can be used during boot phase of an embedded device.
	Usage:
	- use kernel option 'vga=xxx' or otherwise enable fb device.
	- put somewhere fbsplash.cfg file and an image in .ppm format.
	- $ setsid fbsplash [params] &
	    -c: hide cursor
	    -d /dev/fbN: framebuffer device (if not /dev/fb0)
	    -s path_to_image_file (can be "-" for stdin)
	    -i path_to_cfg_file (can be "-" for stdin)
	    -f path_to_fifo (can be "-" for stdin)
	- if you want to run it only in presence of kernel parameter:
	    grep -q "fbsplash=on" </proc/cmdline && setsid fbsplash [params] &
	- commands for fifo:
	    "NN" (ASCII decimal number) - percentage to show on progress bar
	    "exit" - well you guessed it
config FLASH_ERASEALL
	bool "flash_eraseall (5.5 kb)"
	default n  # doesn't build on Ubuntu 8.04
	help
	The flash_eraseall binary from mtd-utils as of git head c4c6a59eb.
	This utility is used to erase the whole MTD device.
config FLASH_LOCK
	bool "flash_lock (2.1 kb)"
	default n  # doesn't build on Ubuntu 8.04
	help
	The flash_lock binary from mtd-utils as of git head 5ec0c10d0. This
	utility locks part or all of the flash device.

config FLASH_UNLOCK
	bool "flash_unlock (1.3 kb)"
	default n  # doesn't build on Ubuntu 8.04
	help
	The flash_unlock binary from mtd-utils as of git head 5ec0c10d0. This
	utility unlocks part or all of the flash device.
config FLASHCP
	bool "flashcp (5.4 kb)"
	default n  # doesn't build on Ubuntu 8.04
	help
	The flashcp binary, inspired by mtd-utils as of git head 5eceb74f7.
	This utility is used to copy images into a MTD device.
config HDPARM
	bool "hdparm (23 kb)"
	default y
	select PLATFORM_LINUX
	help
	Get/Set hard drive parameters. Primarily intended for ATA
	drives.

config FEATURE_HDPARM_GET_IDENTITY
	bool "Support obtaining detailed information directly from drives"
	default y
	depends on HDPARM
	help
	Enable the -I and -i options to obtain detailed information
	directly from drives about their capabilities and supported ATA
	feature set. If no device name is specified, hdparm will read
	identify data from stdin. Enabling this option will add about 16k...

config FEATURE_HDPARM_HDIO_SCAN_HWIF
	bool "Register an IDE interface (DANGEROUS)"
	default y
	depends on HDPARM
	help
	Enable the 'hdparm -R' option to register an IDE interface.
	This is dangerous stuff, so you should probably say N.

config FEATURE_HDPARM_HDIO_UNREGISTER_HWIF
	bool "Un-register an IDE interface (DANGEROUS)"
	default y
	depends on HDPARM
	help
	Enable the 'hdparm -U' option to un-register an IDE interface.
	This is dangerous stuff, so you should probably say N.

config FEATURE_HDPARM_HDIO_DRIVE_RESET
	bool "Perform device reset (DANGEROUS)"
	default y
	depends on HDPARM
	help
	Enable the 'hdparm -w' option to perform a device reset.
	This is dangerous stuff, so you should probably say N.

config FEATURE_HDPARM_HDIO_TRISTATE_HWIF
	bool "Tristate device for hotswap (DANGEROUS)"
	default y
	depends on HDPARM
	help
	Enable the 'hdparm -x' option to tristate device for hotswap,
	and the '-b' option to get/set bus state. This is dangerous
	stuff, so you should probably say N.

config FEATURE_HDPARM_HDIO_GETSET_DMA
	bool "Get/set using_dma flag"
	default y
	depends on HDPARM
	help
	Enable the 'hdparm -d' option to get/set using_dma flag.
config HEXEDIT
	bool "hexedit"
	default y
	help
	Edit file in hexadecimal.
config I2CGET
	bool "i2cget (5.6 kb)"
	default y
	select PLATFORM_LINUX
	help
	Read from I2C/SMBus chip registers.

config I2CSET
	bool "i2cset (6.9 kb)"
	default y
	select PLATFORM_LINUX
	help
	Set I2C registers.

config I2CDUMP
	bool "i2cdump (7.2 kb)"
	default y
	select PLATFORM_LINUX
	help
	Examine I2C registers.

config I2CDETECT
	bool "i2cdetect (7.2 kb)"
	default y
	select PLATFORM_LINUX
	help
	Detect I2C chips.

config INOTIFYD
	bool "inotifyd (3.5 kb)"
	default n  # doesn't build on Knoppix 5
	help
	Simple inotify daemon. Reports filesystem changes. Requires
	kernel >= 2.6.13
config LESS
	bool "less (15 kb)"
	default y
	help
	'less' is a pager, meaning that it displays text files. It possesses
	a wide array of features, and is an improvement over 'more'.

config FEATURE_LESS_MAXLINES
	int "Max number of input lines less will try to eat"
	default 9999999
	depends on LESS

config FEATURE_LESS_BRACKETS
	bool "Enable bracket searching"
	default y
	depends on LESS
	help
	This option adds the capability to search for matching left and right
	brackets, facilitating programming.

config FEATURE_LESS_FLAGS
	bool "Enable -m/-M"
	default y
	depends on LESS
	help
	The -M/-m flag enables a more sophisticated status line.

config FEATURE_LESS_TRUNCATE
	bool "Enable -S"
	default y
	depends on LESS
	help
	The -S flag causes long lines to be truncated rather than
	wrapped.

config FEATURE_LESS_MARKS
	bool "Enable marks"
	default y
	depends on LESS
	help
	Marks enable positions in a file to be stored for easy reference.

config FEATURE_LESS_REGEXP
	bool "Enable regular expressions"
	default y
	depends on LESS
	help
	Enable regular expressions, allowing complex file searches.

config FEATURE_LESS_WINCH
	bool "Enable automatic resizing on window size changes"
	default y
	depends on LESS
	help
	Makes less track window size changes.

config FEATURE_LESS_ASK_TERMINAL
	bool "Use 'tell me cursor position' ESC sequence to measure window"
	default y
	depends on FEATURE_LESS_WINCH
	help
	Makes less track window size changes.
	If terminal size can't be retrieved and $LINES/$COLUMNS are not set,
	this option makes less perform a last-ditch effort to find it:
	position cursor to 999,999 and ask terminal to report real
	cursor position using "ESC [ 6 n" escape sequence, then read stdin.
	This is not clean but helps a lot on serial lines and such.

config FEATURE_LESS_DASHCMD
	bool "Enable flag changes ('-' command)"
	default y
	depends on LESS
	help
	This enables the ability to change command-line flags within
	less itself ('-' keyboard command).

config FEATURE_LESS_LINENUMS
	bool "Enable -N (dynamic switching of line numbers)"
	default y
	depends on FEATURE_LESS_DASHCMD
config LSSCSI
	bool "lsscsi (2.4 kb)"
	default y
	#select PLATFORM_LINUX
	help
	lsscsi is a utility for displaying information about SCSI buses in the
	system and devices connected to them.

	This version uses sysfs (/sys/bus/scsi/devices) only.
config MAKEDEVS
	bool "makedevs (9.3 kb)"
	default y
	help
	'makedevs' is a utility used to create a batch of devices with
	one command.

	There are two choices for command line behaviour, the interface
	as used by LEAF/Linux Router Project, or a device table file.

	'leaf' is traditionally what busybox follows, it allows multiple
	devices of a particluar type to be created per command.
	e.g. /dev/hda[0-9]
	Device properties are passed as command line arguments.

	'table' reads device properties from a file or stdin, allowing
	a batch of unrelated devices to be made with one command.
	User/group names are allowed as an alternative to uid/gid.

choice
	prompt "Choose makedevs behaviour"
	depends on MAKEDEVS
	default FEATURE_MAKEDEVS_TABLE

config FEATURE_MAKEDEVS_LEAF
	bool "leaf"

config FEATURE_MAKEDEVS_TABLE
	bool "table"

endchoice
config MAN
	bool "man (27 kb)"
	default y
	help
	Format and display manual pages.
config MICROCOM
	bool "microcom (5.6 kb)"
	default y
	help
	The poor man's minicom utility for chatting with serial port devices.
config MT
	bool "mt (2.6 kb)"
	default y
	help
	mt is used to control tape devices. You can use the mt utility
	to advance or rewind a tape past a specified number of archive
	files on the tape.
config NANDWRITE
	bool "nandwrite (5.9 kb)"
	default y
	select PLATFORM_LINUX
	help
	Write to the specified MTD device, with bad blocks awareness

config NANDDUMP
	bool "nanddump (6.3 kb)"
	default y
	select PLATFORM_LINUX
	help
	Dump the content of raw NAND chip
config PARTPROBE
	bool "partprobe (3.6 kb)"
	default y
	select PLATFORM_LINUX
	help
	Ask kernel to rescan partition table.
config RAIDAUTORUN
	bool "raidautorun (1.4 kb)"
	default y
	select PLATFORM_LINUX
	help
	raidautorun tells the kernel md driver to
	search and start RAID arrays.
config READAHEAD
	bool "readahead (2 kb)"
	default y
	depends on LFS
	select PLATFORM_LINUX
	help
	Preload the files listed on the command line into RAM cache so that
	subsequent reads on these files will not block on disk I/O.

	This applet just calls the readahead(2) system call on each file.
	It is mainly useful in system startup scripts to preload files
	or executables before they are used. When used at the right time
	(in particular when a CPU bound process is running) it can
	significantly speed up system startup.

	As readahead(2) blocks until each file has been read, it is best to
	run this applet as a background job.
config RFKILL
	bool "rfkill (5.3 kb)"
	default n # doesn't build on Ubuntu 9.04
	select PLATFORM_LINUX
	help
	Enable/disable wireless devices.

	rfkill list : list all wireless devices
	rfkill list bluetooth : list all bluetooth devices
	rfkill list 1 : list device corresponding to the given index
	rfkill block|unblock wlan : block/unblock all wlan(wifi) devices

config RUNLEVEL
	bool "runlevel (518 bytes)"
	default y
	depends on FEATURE_UTMP
	help
	find the current and previous system runlevel.

	This applet uses utmp but does not rely on busybox supporing
	utmp on purpose. It is used by e.g. emdebian via /etc/init.d/rc.
config RX
	bool "rx (2.9 kb)"
	default y
	select PLATFORM_LINUX
	help
	Receive files using the Xmodem protocol.
config SETFATTR
	bool "setfattr"
	default y
	help
	Set/delete extended attributes on files
config SETSERIAL
	bool "setserial (6.6 kb)"
	default y
	select PLATFORM_LINUX
	help
	Retrieve or set Linux serial port.
config STRINGS
	bool "strings (4.3 kb)"
	default y
	help
	strings prints the printable character sequences for each file
	specified.
config TIME
	bool "time (7 kb)"
	default y
	help
	The time command runs the specified program with the given arguments.
	When the command finishes, time writes a message to standard output
	giving timing statistics about this program run.
config TTYSIZE
	bool "ttysize (372 bytes)"
	default y
	help
	A replacement for "stty size". Unlike stty, can report only width,
	only height, or both, in any order. It also does not complain on
	error, but returns default 80x24.
	Usage in shell scripts: width=`ttysize w`.
config UBIATTACH
	bool "ubiattach (4.7 kb)"
	default y
	select PLATFORM_LINUX
	help
	Attach MTD device to an UBI device.

config UBIDETACH
	bool "ubidetach (4.6 kb)"
	default y
	select PLATFORM_LINUX
	help
	Detach MTD device from an UBI device.

config UBIMKVOL
	bool "ubimkvol (5.8 kb)"
	default y
	select PLATFORM_LINUX
	help
	Create a UBI volume.

config UBIRMVOL
	bool "ubirmvol (5.2 kb)"
	default y
	select PLATFORM_LINUX
	help
	Delete a UBI volume.

config UBIRSVOL
	bool "ubirsvol (4.6 kb)"
	default y
	select PLATFORM_LINUX
	help
	Resize a UBI volume.

config UBIUPDATEVOL
	bool "ubiupdatevol (5.6 kb)"
	default y
	select PLATFORM_LINUX
	help
	Update a UBI volume.
config UBIRENAME
	bool "ubirename (2.2 kb)"
	default y
	select PLATFORM_LINUX
	help
	Utility to rename UBI volumes
config VOLNAME
	bool "volname (1.7 kb)"
	default y
	help
	Prints a CD-ROM volume name.
config WATCHDOG
	bool "watchdog (5.1 kb)"
	default y
	select PLATFORM_LINUX
	help
	The watchdog utility is used with hardware or software watchdog
	device drivers. It opens the specified watchdog device special file
	and periodically writes a magic character to the device. If the
	watchdog applet ever fails to write the magic character within a
	certain amount of time, the watchdog device assumes the system has
	hung, and will cause the hardware to reboot.

endmenu