csu3_am335x/EVSE/Projects/DD360Audi/Apps/ReDoComm.h

#ifndef _DO_COMM_H_
#define _DO_COMM_H_

//------------------------------------------------------------------------------
//--- common define ---
//------------------------------------------------------------------------------
#define CMP_ETH_IP_HEAD                         "192.168.100"

#define DoIPAddress                             "192.168.100.1"
#define DoTcpPort                               36000

#define IMAGE_FILE_PATH                         "../mnt"
#define TFTP_PULL_CMD                           "tftp"
#define SIGTERM_MSG                             "SegmentFault.~~~~\n"

#define MAX_REGISTER_NUM                        30

#define CHECK_NETWORK_FAIL_COUNT                10
#define CONNECT_SERVER_FAIL_COUNT               5
#define WARNING_CODE_SIZE                       6

#define MAX_VOLTAGE                             10000
#define MAX_CURRENCY                            5000
#define MAX_POWER                               3600

#define DISPENSER_INIT_SUCC                     0x01
#define DISPENER_INIT_FAIL                      0x02
#define DISPENSER_SOCKET_RECONN                 0x03

#define VERSION_BUF_SIZE                        32

#define PRICES_UNIT                             0.01

#define PASS                                    (1)
#define FAIL                                    (-1)

#define YES                                     (1)
#define NO                                      (0)

#define NO_DEFINE                               255

#define LOOP_RETRY_TIME                         1000 //1 second

#define NORMAL                                  0
#define ABNORMAL                                1

//------------------------------------------------------------------------------
//--- dispenser ID ---
//------------------------------------------------------------------------------
#define ID_RESERVER                             0x00
#define ID_OF_DISPENSER                         0x01
#define ID_REGISTER                             0xFF

//------------------------------------------------------------------------------
//--- dispenser operation ---
//------------------------------------------------------------------------------
#define OP_READ_DATA                            0x01
#define OP_WRITE_DATA                           0x02
#define OP_WAIT_RESPONSE                        0x03

//------------------------------------------------------------------------------
//--- dispenser register ---
//------------------------------------------------------------------------------
#define REG_MODEL_NAME                          0x01
#define REG_CONNECTOR_ID                        0x02
#define REG_POWER_CABINET_STATUS                0x03
#define REG_DISPENSER_STATUS                    0x04
#define REG_CHARGING_CAP                        0x05
#define REG_CHARGING_TARGET                     0x06
#define REG_SOFTWARE_UPDATE                     0x07
#define REG_PLUG_IN_STATE                       0x08
#define REG_CONNECTOR_STATE                     0x09
#define REG_USER_ID                             0x0A
#define REG_CHARGING_PERMISSION                 0x0B
#define REG_MISC_CONTROL                        0X0C
#define REG_REPORT_CSU_VERSION                  0X0D
#define REG_REPORT_OTHER_VERSION                0X0E
#define REG_PRESENT_CHARGING_INFO               0X0F
#define REG_QRCODE_URL_INFO                     0X10
#define REG_WAIT_PLUG_IT_STATE                  0x11

//------------------------------------------------------------------------------
//--- dispenser result ---
//------------------------------------------------------------------------------
#define COMMAND_RESULT_OK                       0x01
#define COMMAND_RESULT_NG                       0x02 //wait state

//------------------------------------------------------------------------------
//--- power cabinet misc status code ---
//------------------------------------------------------------------------------
#define MISC_ST_MISC_CMD                        "B40001"

#define MISC_ST_VERSION                         "B40999"

//------------------------------------------------------------------------------
//--- power cabinet misc command ---
//------------------------------------------------------------------------------
#define MISC_CMD_CONNECOTOR_TIMEOUT             0X0001
#define MISC_CMD_OPERATIVE_STATE                0X0002
#define MISC_CMD_DEFAULT_PRICES                 0x0003
#define MISC_CMD_DEFAULT_CURRENCY               0x0004
#define MISC_CMD_ACCOUNT_BALANCE                0x0005

#define MISC_CMD_HARDWARE_REBOOT                0x0101
#define MISC_CMD_SOFTWARE_RESTART               0x0102
#define MISC_CMD_REMOTE_START_CHARGING          0x0103

#define ST_UPDATE_FIRMWARE                      0x01
#define ST_NO_UPDATE_FIRMWARE                   0x02

//------------------------------------------------------------------------------
#pragma pack(push)
#pragma pack(1)

typedef struct StDoCommGlobalVar {
    uint8_t SeqNum;
    uint8_t DisConnCount;
    uint8_t ConnectorID[2]; //keep from power cabinet
    uint8_t MiscCmd;
    uint8_t Reserved[4];
} DoCommGblData;

typedef struct StCommnadHead {
    uint8_t SeqNum;     //sequence number 0 ~ 255
    uint8_t ID;         //0: Reserved, 0x01 ~ 0xFE: connector ID, 0xFF: exists in register 1 and register 2
    uint8_t OP;         //0x01: read, 0x02: write, 0x03: response from power cabinet
    uint8_t DataLen;    //raw data Length
} CmdHead;

typedef struct StCommandData {
    uint8_t Register;   /*  0x01: dispenser model name (maximum 32 bytes) and the value of dispenser switch
                            0x02: The ID to connector equipped at dispenser
                            0x03: Power cabinet status
                            0x04: Dispenser status
                            0x05: The charging capacity of each connector
                            0x06: The required voltage and current during charging
                            0x07: The indicator of software update to dispenser
                            0x08: Indicate whether the connector is plug-in or not
                            0x09: Indicate the connector state
                            0x0A: The user ID can be RFID card number, EVCCID, etc.
                            0x0B: Charging permission from power cabinet to dispenser
                        */
    uint8_t Data[250];
} CmdData;

typedef struct StResultData {
    uint8_t Register;   /*  0x01: dispenser model name (maximum 32 bytes) and the value of dispenser switch
                            0x02: The ID to connector equipped at dispenser
                            0x03: Power cabinet status
                            0x04: Dispenser status
                            0x05: The charging capacity of each connector
                            0x06: The required voltage and current during charging
                            0x07: The indicator of software update to dispenser
                            0x08: Indicate whether the connector is plug-in or not
                            0x09: Indicate the connector state
                            0x0A: The user ID can be RFID card number, EVCCID, etc.
                            0x0B: Charging permission from power cabinet to dispenser
                        */
    uint8_t Result;
    uint8_t Data[249];
} ResultData;

typedef struct StCsuCmdPkt {
    CmdHead Head;
    CmdData Data;
} CsuCmdPkt;

typedef struct StCsuResultPkt {
    CmdHead Head;
    ResultData Data;
} CsuResultPkt;

typedef struct StMiscCommand {
    uint16_t CMD;
    uint8_t Value[4];
} MiscCommand;

typedef struct StPresentChargingInfo {
    int EvBatterySoc;               // 0~100%
    int RemainChargingDuration;     // second
    float PresentChargingVoltage;   //0~6553.5 volt
    float PresentChargingCurrent;   //0~6553.5 amp
} PreChargingInfo;

typedef struct StSoftwareUpdInfo {
    uint8_t UpdateState;         //1:update , 2: not update
    uint8_t ImgName[248];
} SoftwareUpdInfo;

typedef struct StCapabilityInfo {
    uint16_t OutputVoltage;
    uint16_t OutputCurrent;
    uint16_t OutputPower;
    uint8_t Reserved[2];
} CapabilityInfo;

typedef struct StAccountInfo {
    uint8_t Currency;
    int UserPrices;
    int TotalCost;
    int Balance;
    uint8_t Reserved[3];
} AccountInfo;

#pragma pack(pop)

#endif /* _DO_COMM_H_ */