csu3_am335x/EVSE/GPL/linux-pam-1.5.2/po/Makefile

# Makefile for PO directory in any package using GNU gettext.
# Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
#
# This file can be copied and used freely without restrictions.  It can
# be used in projects which are not available under the GNU General Public
# License but which still want to provide support for the GNU gettext
# functionality.
# Please note that the actual code of GNU gettext is covered by the GNU
# General Public License and is *not* in the public domain.
#
# Origin: gettext-0.18.3
GETTEXT_MACRO_VERSION = 0.18

PACKAGE = Linux-PAM
VERSION = 1.5.2
PACKAGE_BUGREPORT = 

SED = /bin/sed
SHELL = /bin/sh


srcdir = .
top_srcdir = ..


prefix = /opt/ti-processor-sdk-linux-am335x-evm-04.02.00.09/EVSE/GPL/linux-pam-1.5.2/release
exec_prefix = ${prefix}
datarootdir = ${prefix}/share
datadir = ${datarootdir}
localedir = ${datarootdir}/locale
gettextsrcdir = $(datadir)/gettext/po

INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644

# We use $(mkdir_p).
# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as
# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,
# ${SHELL} /opt/ti-processor-sdk-linux-am335x-evm-04.02.00.09/EVSE/GPL/linux-pam-1.5.2/build-aux/install-sh does not start with $(SHELL), so we add it.
# In automake >= 1.10, $(MKDIR_P) is derived from ${MKDIR_P}, which is defined
# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake
# versions, $(mkinstalldirs) and $(install_sh) are unused.
mkinstalldirs = $(SHELL) ${SHELL} /opt/ti-processor-sdk-linux-am335x-evm-04.02.00.09/EVSE/GPL/linux-pam-1.5.2/build-aux/install-sh -d
install_sh = $(SHELL) ${SHELL} /opt/ti-processor-sdk-linux-am335x-evm-04.02.00.09/EVSE/GPL/linux-pam-1.5.2/build-aux/install-sh
MKDIR_P = /bin/mkdir -p
mkdir_p = $(MKDIR_P)

GMSGFMT_ = /usr/bin/msgfmt
GMSGFMT_no = /usr/bin/msgfmt
GMSGFMT_yes = /usr/bin/msgfmt
GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))
MSGFMT_ = /usr/bin/msgfmt
MSGFMT_no = /usr/bin/msgfmt
MSGFMT_yes = /usr/bin/msgfmt
MSGFMT = $(MSGFMT_$(USE_MSGCTXT))
XGETTEXT_ = /usr/bin/xgettext
XGETTEXT_no = /usr/bin/xgettext
XGETTEXT_yes = /usr/bin/xgettext
XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))
MSGMERGE = msgmerge
MSGMERGE_UPDATE = /usr/bin/msgmerge --update
MSGINIT = msginit
MSGCONV = msgconv
MSGFILTER = msgfilter

POFILES =  af.po am.po ar.po as.po be.po bg.po bn_IN.po bn.po bs.po ca.po cs.po cy.po da.po de_CH.po de.po el.po eo.po es.po et.po eu.po fa.po fi.po fr.po ga.po gl.po gu.po he.po hi.po hr.po hu.po ia.po id.po is.po it.po ja.po ka.po kk.po km.po kn.po ko.po kw_GB.po ky.po lt.po lv.po mk.po ml.po mn.po mr.po ms.po my.po nb.po ne.po nl.po nn.po or.po pa.po pl.po pt_BR.po pt.po ro.po ru.po si.po sk.po sl.po sq.po sr@latin.po sr.po sv.po ta.po te.po tg.po th.po tr.po uk.po ur.po vi.po yo.po zh_CN.po zh_HK.po zh_TW.po zu.po az.po
GMOFILES =  af.gmo am.gmo ar.gmo as.gmo be.gmo bg.gmo bn_IN.gmo bn.gmo bs.gmo ca.gmo cs.gmo cy.gmo da.gmo de_CH.gmo de.gmo el.gmo eo.gmo es.gmo et.gmo eu.gmo fa.gmo fi.gmo fr.gmo ga.gmo gl.gmo gu.gmo he.gmo hi.gmo hr.gmo hu.gmo ia.gmo id.gmo is.gmo it.gmo ja.gmo ka.gmo kk.gmo km.gmo kn.gmo ko.gmo kw_GB.gmo ky.gmo lt.gmo lv.gmo mk.gmo ml.gmo mn.gmo mr.gmo ms.gmo my.gmo nb.gmo ne.gmo nl.gmo nn.gmo or.gmo pa.gmo pl.gmo pt_BR.gmo pt.gmo ro.gmo ru.gmo si.gmo sk.gmo sl.gmo sq.gmo sr@latin.gmo sr.gmo sv.gmo ta.gmo te.gmo tg.gmo th.gmo tr.gmo uk.gmo ur.gmo vi.gmo yo.gmo zh_CN.gmo zh_HK.gmo zh_TW.gmo zu.gmo az.gmo
UPDATEPOFILES =  af.po-update am.po-update ar.po-update as.po-update be.po-update bg.po-update bn_IN.po-update bn.po-update bs.po-update ca.po-update cs.po-update cy.po-update da.po-update de_CH.po-update de.po-update el.po-update eo.po-update es.po-update et.po-update eu.po-update fa.po-update fi.po-update fr.po-update ga.po-update gl.po-update gu.po-update he.po-update hi.po-update hr.po-update hu.po-update ia.po-update id.po-update is.po-update it.po-update ja.po-update ka.po-update kk.po-update km.po-update kn.po-update ko.po-update kw_GB.po-update ky.po-update lt.po-update lv.po-update mk.po-update ml.po-update mn.po-update mr.po-update ms.po-update my.po-update nb.po-update ne.po-update nl.po-update nn.po-update or.po-update pa.po-update pl.po-update pt_BR.po-update pt.po-update ro.po-update ru.po-update si.po-update sk.po-update sl.po-update sq.po-update sr@latin.po-update sr.po-update sv.po-update ta.po-update te.po-update tg.po-update th.po-update tr.po-update uk.po-update ur.po-update vi.po-update yo.po-update zh_CN.po-update zh_HK.po-update zh_TW.po-update zu.po-update az.po-update
DUMMYPOFILES =  af.nop am.nop ar.nop as.nop be.nop bg.nop bn_IN.nop bn.nop bs.nop ca.nop cs.nop cy.nop da.nop de_CH.nop de.nop el.nop eo.nop es.nop et.nop eu.nop fa.nop fi.nop fr.nop ga.nop gl.nop gu.nop he.nop hi.nop hr.nop hu.nop ia.nop id.nop is.nop it.nop ja.nop ka.nop kk.nop km.nop kn.nop ko.nop kw_GB.nop ky.nop lt.nop lv.nop mk.nop ml.nop mn.nop mr.nop ms.nop my.nop nb.nop ne.nop nl.nop nn.nop or.nop pa.nop pl.nop pt_BR.nop pt.nop ro.nop ru.nop si.nop sk.nop sl.nop sq.nop sr@latin.nop sr.nop sv.nop ta.nop te.nop tg.nop th.nop tr.nop uk.nop ur.nop vi.nop yo.nop zh_CN.nop zh_HK.nop zh_TW.nop zu.nop az.nop
DISTFILES.common = Makefile.in.in remove-potcdate.sin \
$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \
$(POFILES) $(GMOFILES) \
$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)

POTFILES = \
     ../libpam/pam_account.c \
     ../libpam/pam_audit.c \
     ../libpam/pam_auth.c \
     ../libpam/pam_data.c \
     ../libpam/pam_delay.c \
     ../libpam/pam_dispatch.c \
     ../libpam/pam_dynamic.c \
     ../libpam/pam_end.c \
     ../libpam/pam_env.c \
     ../libpam/pam_get_authtok.c \
     ../libpam/pam_handlers.c \
     ../libpam/pam_item.c \
     ../libpam/pam_misc.c \
     ../libpam/pam_modutil_cleanup.c \
     ../libpam/pam_modutil_getgrgid.c \
     ../libpam/pam_modutil_getgrnam.c \
     ../libpam/pam_modutil_getlogin.c \
     ../libpam/pam_modutil_getpwnam.c \
     ../libpam/pam_modutil_getpwuid.c \
     ../libpam/pam_modutil_getspnam.c \
     ../libpam/pam_modutil_ingroup.c \
     ../libpam/pam_modutil_ioloop.c \
     ../libpam/pam_password.c \
     ../libpam/pam_prelude.c \
     ../libpam/pam_session.c \
     ../libpam/pam_start.c \
     ../libpam/pam_strerror.c \
     ../libpam/pam_syslog.c \
     ../libpam/pam_vprompt.c \
     ../libpam_misc/help_env.c \
     ../libpam_misc/misc_conv.c \
     ../libpamc/pamc_client.c \
     ../libpamc/pamc_converse.c \
     ../libpamc/pamc_load.c \
     ../modules/pam_access/pam_access.c \
     ../modules/pam_debug/pam_debug.c \
     ../modules/pam_deny/pam_deny.c \
     ../modules/pam_echo/pam_echo.c \
     ../modules/pam_env/pam_env.c \
     ../modules/pam_exec/pam_exec.c \
     ../modules/pam_faildelay/pam_faildelay.c \
     ../modules/pam_faillock/main.c \
     ../modules/pam_faillock/pam_faillock.c \
     ../modules/pam_filter/pam_filter.c \
     ../modules/pam_filter/upperLOWER/upperLOWER.c \
     ../modules/pam_ftp/pam_ftp.c \
     ../modules/pam_group/pam_group.c \
     ../modules/pam_issue/pam_issue.c \
     ../modules/pam_keyinit/pam_keyinit.c \
     ../modules/pam_lastlog/pam_lastlog.c \
     ../modules/pam_limits/pam_limits.c \
     ../modules/pam_listfile/pam_listfile.c \
     ../modules/pam_localuser/pam_localuser.c \
     ../modules/pam_loginuid/pam_loginuid.c \
     ../modules/pam_mail/pam_mail.c \
     ../modules/pam_mkhomedir/pam_mkhomedir.c \
     ../modules/pam_motd/pam_motd.c \
     ../modules/pam_namespace/md5.c \
     ../modules/pam_namespace/pam_namespace.c \
     ../modules/pam_nologin/pam_nologin.c \
     ../modules/pam_permit/pam_permit.c \
     ../modules/pam_pwhistory/opasswd.c \
     ../modules/pam_pwhistory/pam_pwhistory.c \
     ../modules/pam_rhosts/pam_rhosts.c \
     ../modules/pam_rootok/pam_rootok.c \
     ../modules/pam_securetty/pam_securetty.c \
     ../modules/pam_selinux/pam_selinux.c \
     ../modules/pam_selinux/pam_selinux_check.c \
     ../modules/pam_sepermit/pam_sepermit.c \
     ../modules/pam_shells/pam_shells.c \
     ../modules/pam_stress/pam_stress.c \
     ../modules/pam_succeed_if/pam_succeed_if.c \
     ../modules/pam_time/pam_time.c \
     ../modules/pam_timestamp/pam_timestamp.c \
     ../modules/pam_timestamp/pam_timestamp_check.c \
     ../modules/pam_tty_audit/pam_tty_audit.c \
     ../modules/pam_umask/pam_umask.c \
     ../modules/pam_unix/bigcrypt.c \
     ../modules/pam_unix/bigcrypt_main.c \
     ../modules/pam_unix/md5.c \
     ../modules/pam_unix/md5_broken.c \
     ../modules/pam_unix/md5_crypt.c \
     ../modules/pam_unix/md5_good.c \
     ../modules/pam_unix/pam_unix_acct.c \
     ../modules/pam_unix/pam_unix_auth.c \
     ../modules/pam_unix/pam_unix_passwd.c \
     ../modules/pam_unix/pam_unix_sess.c \
     ../modules/pam_unix/passverify.c \
     ../modules/pam_unix/support.c \
     ../modules/pam_unix/unix_chkpwd.c \
     ../modules/pam_unix/yppasswd_xdr.c \
     ../modules/pam_userdb/pam_userdb.c \
     ../modules/pam_warn/pam_warn.c \
     ../modules/pam_wheel/pam_wheel.c \
     ../modules/pam_xauth/pam_xauth.c

CATALOGS =  af.gmo am.gmo ar.gmo as.gmo be.gmo bg.gmo bn_IN.gmo bn.gmo bs.gmo ca.gmo cs.gmo cy.gmo da.gmo de_CH.gmo de.gmo el.gmo eo.gmo es.gmo et.gmo eu.gmo fa.gmo fi.gmo fr.gmo ga.gmo gl.gmo gu.gmo he.gmo hi.gmo hr.gmo hu.gmo ia.gmo id.gmo is.gmo it.gmo ja.gmo ka.gmo kk.gmo km.gmo kn.gmo ko.gmo kw_GB.gmo ky.gmo lt.gmo lv.gmo mk.gmo ml.gmo mn.gmo mr.gmo ms.gmo my.gmo nb.gmo ne.gmo nl.gmo nn.gmo or.gmo pa.gmo pl.gmo pt_BR.gmo pt.gmo ro.gmo ru.gmo si.gmo sk.gmo sl.gmo sq.gmo sr@latin.gmo sr.gmo sv.gmo ta.gmo te.gmo tg.gmo th.gmo tr.gmo uk.gmo ur.gmo vi.gmo yo.gmo zh_CN.gmo zh_HK.gmo zh_TW.gmo zu.gmo az.gmo

# Makevars gets inserted here. (Don't remove this line!)
# Makefile variables for PO directory in any package using GNU gettext.

# Usually the message domain is the same as the package name.
DOMAIN = $(PACKAGE)

# These two variables depend on the location of this directory.
subdir = po
top_builddir = ..

# These options get passed to xgettext.
XGETTEXT_OPTIONS = -E --keyword=_ --keyword=N_

# This is the copyright holder that gets inserted into the header of the
# $(DOMAIN).pot file.  Set this to the copyright holder of the surrounding
# package.  (Note that the msgstr strings, extracted from the package's
# sources, belong to the copyright holder of the package.)  Translators are
# expected to transfer the copyright for their translations to this person
# or entity, or to disclaim their copyright.  The empty string stands for
# the public domain; in this case the translators are expected to disclaim
# their copyright.
COPYRIGHT_HOLDER = Linux-PAM Project

# This is the email address or URL to which the translators shall report
# bugs in the untranslated strings:
# - Strings which are not entire sentences, see the maintainer guidelines
#   in the GNU gettext documentation, section 'Preparing Strings'.
# - Strings which use unclear terms or require additional context to be
#   understood.
# - Strings which make invalid assumptions about notation of date, time or
#   money.
# - Pluralisation problems.
# - Incorrect English spelling.
# - Incorrect formatting.
# It can be your email address, or a mailing list address where translators
# can write to without being subscribed, or the URL of a web page through
# which the translators can contact you.
MSGID_BUGS_ADDRESS = https://github.com/linux-pam/linux-pam/issues

# This is the list of locale categories, beyond LC_MESSAGES, for which the
# message catalogs shall be used.  It is usually empty.
EXTRA_LOCALE_CATEGORIES =

# This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt'
# context.  Possible values are "yes" and "no".  Set this to yes if the
# package uses functions taking also a message context, like pgettext(), or
# if in $(XGETTEXT_OPTIONS) you define keywords with a context argument.
USE_MSGCTXT = no

# These options get passed to msgmerge.
# Useful options are in particular:
#   --previous            to keep previous msgids of translated messages,
#   --quiet               to reduce the verbosity.
MSGMERGE_OPTIONS =

.SUFFIXES:
.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update

.po.mo:
	@echo "$(MSGFMT) -c -o $@ $<"; \
	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@

.po.gmo:
	@lang=`echo $* | sed -e 's,.*/,,'`; \
	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \
	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo

.sin.sed:
	sed -e '/^#/d' $< > t-$@
	mv t-$@ $@


all: all-yes

all-yes: stamp-po
all-no:

# Ensure that the gettext macros and this Makefile.in.in are in sync.
CHECK_MACRO_VERSION = \
	test "$(GETTEXT_MACRO_VERSION)" = "0.18" \
	  || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.18" 1>&2; \
	       exit 1; \
	     }

# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no
# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because
# we don't want to bother translators with empty POT files). We assume that
# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.
# In this case, stamp-po is a nop (i.e. a phony target).

# stamp-po is a timestamp denoting the last time at which the CATALOGS have
# been loosely updated. Its purpose is that when a developer or translator
# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
# invocations of "make" will do nothing. This timestamp would not be necessary
# if updating the $(CATALOGS) would always touch them; however, the rule for
# $(POFILES) has been designed to not touch files that don't need to be
# changed.
stamp-po: $(srcdir)/$(DOMAIN).pot
	@$(CHECK_MACRO_VERSION)
	test ! -f $(srcdir)/$(DOMAIN).pot || \
	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
	@test ! -f $(srcdir)/$(DOMAIN).pot || { \
	  echo "touch stamp-po" && \
	  echo timestamp > stamp-poT && \
	  mv stamp-poT stamp-po; \
	}

# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
# otherwise packages like GCC can not be built if only parts of the source
# have been downloaded.

# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
# The determination of whether the package xyz is a GNU one is based on the
# heuristic whether some file in the top level directory mentions "GNU xyz".
# If GNU 'find' is available, we avoid grepping through monster files.
$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
	if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \
	       LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep 'GNU Linux-PAM' /dev/null '{}' ';' 2>/dev/null; \
	     else \
	       LC_ALL=C grep 'GNU Linux-PAM' $(top_srcdir)/* 2>/dev/null; \
	     fi; \
	   } | grep -v 'libtool:' >/dev/null; then \
	  package_gnu='GNU '; \
	else \
	  package_gnu=''; \
	fi; \
	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \
	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \
	else \
	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \
	fi; \
	case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
	  '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \
	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
	      --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS)  \
	      --files-from=$(srcdir)/POTFILES.in \
	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
	      --msgid-bugs-address="$$msgid_bugs_address" \
	    ;; \
	  *) \
	    $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
	      --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS)  \
	      --files-from=$(srcdir)/POTFILES.in \
	      --copyright-holder='$(COPYRIGHT_HOLDER)' \
	      --package-name="$${package_gnu}Linux-PAM" \
	      --package-version='1.5.2' \
	      --msgid-bugs-address="$$msgid_bugs_address" \
	    ;; \
	esac
	test ! -f $(DOMAIN).po || { \
	  if test -f $(srcdir)/$(DOMAIN).pot; then \
	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
	    else \
	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
	    fi; \
	  else \
	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
	  fi; \
	}

# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
# every "make" invocation, only create it when it is missing.
# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
$(srcdir)/$(DOMAIN).pot:
	$(MAKE) $(DOMAIN).pot-update

# This target rebuilds a PO file if $(DOMAIN).pot has changed.
# Note that a PO file is not touched if it doesn't need to be changed.
$(POFILES): $(srcdir)/$(DOMAIN).pot
	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
	if test -f "$(srcdir)/$${lang}.po"; then \
	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \
	  cd $(srcdir) \
	    && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
	           '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \
	           *) \
	             $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \
	         esac; \
	       }; \
	else \
	  $(MAKE) $${lang}.po-create; \
	fi


install: install-exec install-data
install-exec:
install-data: install-data-yes
	if test "$(PACKAGE)" = "gettext-tools"; then \
	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
	  for file in $(DISTFILES.common) Makevars.template; do \
	    $(INSTALL_DATA) $(srcdir)/$$file \
			    $(DESTDIR)$(gettextsrcdir)/$$file; \
	  done; \
	  for file in Makevars; do \
	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
	  done; \
	else \
	  : ; \
	fi
install-data-no: all
install-data-yes: all
	@catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	  cat=`basename $$cat`; \
	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
	  dir=$(localedir)/$$lang/LC_MESSAGES; \
	  $(mkdir_p) $(DESTDIR)$$dir; \
	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
	    if test -n "$$lc"; then \
	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
	         for file in *; do \
	           if test -f $$file; then \
	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
	           fi; \
	         done); \
	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	      else \
	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
	          :; \
	        else \
	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        fi; \
	      fi; \
	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
	    fi; \
	  done; \
	done

install-strip: install

installdirs: installdirs-exec installdirs-data
installdirs-exec:
installdirs-data: installdirs-data-yes
	if test "$(PACKAGE)" = "gettext-tools"; then \
	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \
	else \
	  : ; \
	fi
installdirs-data-no:
installdirs-data-yes:
	@catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	  cat=`basename $$cat`; \
	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
	  dir=$(localedir)/$$lang/LC_MESSAGES; \
	  $(mkdir_p) $(DESTDIR)$$dir; \
	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
	    if test -n "$$lc"; then \
	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
	         for file in *; do \
	           if test -f $$file; then \
	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
	           fi; \
	         done); \
	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
	      else \
	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
	          :; \
	        else \
	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
	        fi; \
	      fi; \
	    fi; \
	  done; \
	done

# Define this as empty until I found a useful application.
installcheck:

uninstall: uninstall-exec uninstall-data
uninstall-exec:
uninstall-data: uninstall-data-yes
	if test "$(PACKAGE)" = "gettext-tools"; then \
	  for file in $(DISTFILES.common) Makevars.template; do \
	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
	  done; \
	else \
	  : ; \
	fi
uninstall-data-no:
uninstall-data-yes:
	catalogs='$(CATALOGS)'; \
	for cat in $$catalogs; do \
	  cat=`basename $$cat`; \
	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
	  done; \
	done

check: all

info dvi ps pdf html tags TAGS ctags CTAGS ID:

mostlyclean:
	rm -f remove-potcdate.sed
	rm -f stamp-poT
	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
	rm -fr *.o

clean: mostlyclean

distclean: clean
	rm -f Makefile Makefile.in POTFILES *.mo

maintainer-clean: distclean
	@echo "This command is intended for maintainers to use;"
	@echo "it deletes files that may require special tools to rebuild."
	rm -f stamp-po $(GMOFILES)

distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
dist distdir:
	$(MAKE) update-po
	@$(MAKE) dist2
# This is a separate target because 'update-po' must be executed before.
dist2: stamp-po $(DISTFILES)
	dists="$(DISTFILES)"; \
	if test "$(PACKAGE)" = "gettext-tools"; then \
	  dists="$$dists Makevars.template"; \
	fi; \
	if test -f $(srcdir)/$(DOMAIN).pot; then \
	  dists="$$dists $(DOMAIN).pot stamp-po"; \
	fi; \
	if test -f $(srcdir)/ChangeLog; then \
	  dists="$$dists ChangeLog"; \
	fi; \
	for i in 0 1 2 3 4 5 6 7 8 9; do \
	  if test -f $(srcdir)/ChangeLog.$$i; then \
	    dists="$$dists ChangeLog.$$i"; \
	  fi; \
	done; \
	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
	for file in $$dists; do \
	  if test -f $$file; then \
	    cp -p $$file $(distdir) || exit 1; \
	  else \
	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \
	  fi; \
	done

update-po: Makefile
	$(MAKE) $(DOMAIN).pot-update
	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
	$(MAKE) update-gmo

# General rule for creating PO files.

.nop.po-create:
	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
	exit 1

# General rule for updating PO files.

.nop.po-update:
	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
	tmpdir=`pwd`; \
	echo "$$lang:"; \
	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
	echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
	cd $(srcdir); \
	if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \
	       '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \
	         $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
	       *) \
	         $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \
	     esac; \
	   }; then \
	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
	    rm -f $$tmpdir/$$lang.new.po; \
	  else \
	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
	      :; \
	    else \
	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
	      exit 1; \
	    fi; \
	  fi; \
	else \
	  echo "msgmerge for $$lang.po failed!" 1>&2; \
	  rm -f $$tmpdir/$$lang.new.po; \
	fi

$(DUMMYPOFILES):

update-gmo: Makefile $(GMOFILES)
	@:

# Recreate Makefile by invoking config.status. Explicitly invoke the shell,
# because execution permission bits may not work on the current file system.
# Use /bin/bash, which is the shell determined by autoconf for the use by its
# scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient.
Makefile: Makefile.in.in Makevars $(top_builddir)/config.status POTFILES.in LINGUAS
	cd $(top_builddir) \
	  && /bin/bash ./config.status $(subdir)/$@.in po-directories

force:

# Tell versions [3.59,3.63) of GNU make not to export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Special Makefile rules for English message catalogs with quotation marks.

DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot

.SUFFIXES: .insert-header .po-update-en

en@quot.po-create:
	$(MAKE) en@quot.po-update
en@boldquot.po-create:
	$(MAKE) en@boldquot.po-update

en@quot.po-update: en@quot.po-update-en
en@boldquot.po-update: en@boldquot.po-update-en

.insert-header.po-update-en:
	@lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
	tmpdir=`pwd`; \
	echo "$$lang:"; \
	ll=`echo $$lang | sed -e 's/@.*//'`; \
	LC_ALL=C; export LC_ALL; \
	cd $(srcdir); \
	if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
	    rm -f $$tmpdir/$$lang.new.po; \
	  else \
	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
	      :; \
	    else \
	      echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
	      exit 1; \
	    fi; \
	  fi; \
	else \
	  echo "creation of $$lang.po failed!" 1>&2; \
	  rm -f $$tmpdir/$$lang.new.po; \
	fi

en@quot.insert-header: insert-header.sin
	sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header

en@boldquot.insert-header: insert-header.sin
	sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header

mostlyclean: mostlyclean-quot
mostlyclean-quot:
	rm -f *.insert-header