# 1 "<stdin>"
# 1 "<built-in>"
# 1 "<command-line>"
# 1 "././include/linux/kconfig.h" 1



# 1 "include/generated/autoconf.h" 1
# 5 "././include/linux/kconfig.h" 2
# 1 "<command-line>" 2
# 1 "<stdin>"







/dts-v1/;

# 1 "./arch/arm/dts/am33xx.dtsi" 1
# 11 "./arch/arm/dts/am33xx.dtsi"
# 1 "./arch/arm/dts/include/dt-bindings/gpio/gpio.h" 1
# 12 "./arch/arm/dts/am33xx.dtsi" 2
# 1 "./arch/arm/dts/include/dt-bindings/pinctrl/am33xx.h" 1







# 1 "./arch/arm/dts/include/dt-bindings/pinctrl/omap.h" 1
# 9 "./arch/arm/dts/include/dt-bindings/pinctrl/am33xx.h" 2
# 13 "./arch/arm/dts/am33xx.dtsi" 2

# 1 "./arch/arm/dts/skeleton.dtsi" 1






/ {
 #address-cells = <1>;
 #size-cells = <1>;
 chosen { };
 aliases { };
 memory { device_type = "memory"; reg = <0 0>; };
};
# 15 "./arch/arm/dts/am33xx.dtsi" 2

/ {
 compatible = "ti,am33xx";
 interrupt-parent = <&intc>;

 aliases {
  i2c0 = &i2c0;
  i2c1 = &i2c1;
  i2c2 = &i2c2;
  serial0 = &uart0;
  serial1 = &uart1;
  serial2 = &uart2;
  serial3 = &uart3;
  serial4 = &uart4;
  serial5 = &uart5;
  d_can0 = &dcan0;
  d_can1 = &dcan1;
  usb0 = &usb0;
  usb1 = &usb1;
  phy0 = &usb0_phy;
  phy1 = &usb1_phy;
  ethernet0 = &cpsw_emac0;
  ethernet1 = &cpsw_emac1;
 };

 cpus {
  #address-cells = <1>;
  #size-cells = <0>;
  cpu@0 {
   compatible = "arm,cortex-a8";
   device_type = "cpu";
   reg = <0>;






   operating-points = <

    720000 1285000
    600000 1225000
    500000 1125000
    275000 1125000
   >;
   voltage-tolerance = <2>;

   clocks = <&dpll_mpu_ck>;
   clock-names = "cpu";

   clock-latency = <300000>;
  };
 };

 pmu {
  compatible = "arm,cortex-a8-pmu";
  interrupts = <3>;
 };





 soc {
  compatible = "ti,omap-infra";
  mpu {
   compatible = "ti,omap3-mpu";
   ti,hwmods = "mpu";
  };
 };
# 93 "./arch/arm/dts/am33xx.dtsi"
 ocp {
  compatible = "simple-bus";
  #address-cells = <1>;
  #size-cells = <1>;
  ranges;
  ti,hwmods = "l3_main";

  l4_wkup: l4_wkup@44c00000 {
   compatible = "ti,am3-l4-wkup", "simple-bus";
   #address-cells = <1>;
   #size-cells = <1>;
   ranges = <0 0x44c00000 0x280000>;

   prcm: prcm@200000 {
    compatible = "ti,am3-prcm";
    reg = <0x200000 0x4000>;

    prcm_clocks: clocks {
     #address-cells = <1>;
     #size-cells = <0>;
    };

    prcm_clockdomains: clockdomains {
    };
   };

   scm: scm@210000 {
    compatible = "ti,am3-scm", "simple-bus";
    reg = <0x210000 0x2000>;
    #address-cells = <1>;
    #size-cells = <1>;
    ranges = <0 0x210000 0x2000>;

    am33xx_pinmux: pinmux@800 {
     compatible = "pinctrl-single";
     reg = <0x800 0x238>;
     #address-cells = <1>;
     #size-cells = <0>;
     pinctrl-single,register-width = <32>;
     pinctrl-single,function-mask = <0x7f>;
    };

    scm_conf: scm_conf@0 {
     compatible = "syscon";
     reg = <0x0 0x800>;
     #address-cells = <1>;
     #size-cells = <1>;

     scm_clocks: clocks {
      #address-cells = <1>;
      #size-cells = <0>;
     };
    };

    scm_clockdomains: clockdomains {
    };
   };
  };

  intc: interrupt-controller@48200000 {
   compatible = "ti,am33xx-intc";
   interrupt-controller;
   #interrupt-cells = <1>;
   reg = <0x48200000 0x1000>;
  };

  edma: edma@49000000 {
   compatible = "ti,edma3";
   ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
   reg = <0x49000000 0x10000>,
    <0x44e10f90 0x40>;
   interrupts = <12 13 14>;
   #dma-cells = <1>;
  };

  gpio0: gpio@44e07000 {
   compatible = "ti,omap4-gpio";
   ti,hwmods = "gpio1";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   reg = <0x44e07000 0x1000>;
   interrupts = <96>;
  };

  gpio1: gpio@4804c000 {
   compatible = "ti,omap4-gpio";
   ti,hwmods = "gpio2";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   reg = <0x4804c000 0x1000>;
   interrupts = <98>;
  };

  gpio2: gpio@481ac000 {
   compatible = "ti,omap4-gpio";
   ti,hwmods = "gpio3";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   reg = <0x481ac000 0x1000>;
   interrupts = <32>;
  };

  gpio3: gpio@481ae000 {
   compatible = "ti,omap4-gpio";
   ti,hwmods = "gpio4";
   gpio-controller;
   #gpio-cells = <2>;
   interrupt-controller;
   #interrupt-cells = <2>;
   reg = <0x481ae000 0x1000>;
   interrupts = <62>;
  };

  uart0: serial@44e09000 {
   compatible = "ti,omap3-uart";
   ti,hwmods = "uart1";
   clock-frequency = <48000000>;
   reg = <0x44e09000 0x2000>;
   reg-shift = <2>;
   interrupts = <72>;
   status = "disabled";
   dmas = <&edma 26>, <&edma 27>;
   dma-names = "tx", "rx";
  };

  uart1: serial@48022000 {
   compatible = "ti,omap3-uart";
   ti,hwmods = "uart2";
   clock-frequency = <48000000>;
   reg = <0x48022000 0x2000>;
   reg-shift = <2>;
   interrupts = <73>;
   status = "disabled";
   dmas = <&edma 28>, <&edma 29>;
   dma-names = "tx", "rx";
  };

  uart2: serial@48024000 {
   compatible = "ti,omap3-uart";
   ti,hwmods = "uart3";
   clock-frequency = <48000000>;
   reg = <0x48024000 0x2000>;
   reg-shift = <2>;
   interrupts = <74>;
   status = "disabled";
   dmas = <&edma 30>, <&edma 31>;
   dma-names = "tx", "rx";
  };

  uart3: serial@481a6000 {
   compatible = "ti,omap3-uart";
   ti,hwmods = "uart4";
   clock-frequency = <48000000>;
   reg = <0x481a6000 0x2000>;
   reg-shift = <2>;
   interrupts = <44>;
   status = "disabled";
  };

  uart4: serial@481a8000 {
   compatible = "ti,omap3-uart";
   ti,hwmods = "uart5";
   clock-frequency = <48000000>;
   reg = <0x481a8000 0x2000>;
   reg-shift = <2>;
   interrupts = <45>;
   status = "disabled";
  };

  uart5: serial@481aa000 {
   compatible = "ti,omap3-uart";
   ti,hwmods = "uart6";
   clock-frequency = <48000000>;
   reg = <0x481aa000 0x2000>;
   reg-shift = <2>;
   interrupts = <46>;
   status = "disabled";
  };

  i2c0: i2c@44e0b000 {
   compatible = "ti,omap4-i2c";
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "i2c1";
   reg = <0x44e0b000 0x1000>;
   interrupts = <70>;
   status = "disabled";
  };

  i2c1: i2c@4802a000 {
   compatible = "ti,omap4-i2c";
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "i2c2";
   reg = <0x4802a000 0x1000>;
   interrupts = <71>;
   status = "disabled";
  };

  i2c2: i2c@4819c000 {
   compatible = "ti,omap4-i2c";
   #address-cells = <1>;
   #size-cells = <0>;
   ti,hwmods = "i2c3";
   reg = <0x4819c000 0x1000>;
   interrupts = <30>;
   status = "disabled";
  };

  mmc1: mmc@48060000 {
   compatible = "ti,omap4-hsmmc";
   ti,hwmods = "mmc1";
   ti,dual-volt;
   ti,needs-special-reset;
   ti,needs-special-hs-handling;
   dmas = <&edma 24
    &edma 25>;
   dma-names = "tx", "rx";
   interrupts = <64>;
   interrupt-parent = <&intc>;
   reg = <0x48060000 0x1000>;
   status = "disabled";
  };

  mmc2: mmc@481d8000 {
   compatible = "ti,omap4-hsmmc";
   ti,hwmods = "mmc2";
   ti,needs-special-reset;
   dmas = <&edma 2
    &edma 3>;
   dma-names = "tx", "rx";
   interrupts = <28>;
   interrupt-parent = <&intc>;
   reg = <0x481d8000 0x1000>;
   status = "disabled";
  };

  mmc3: mmc@47810000 {
   compatible = "ti,omap4-hsmmc";
   ti,hwmods = "mmc3";
   ti,needs-special-reset;
   interrupts = <29>;
   interrupt-parent = <&intc>;
   reg = <0x47810000 0x1000>;
   status = "disabled";
  };

  hwspinlock: spinlock@480ca000 {
   compatible = "ti,omap4-hwspinlock";
   reg = <0x480ca000 0x1000>;
   ti,hwmods = "spinlock";
   #hwlock-cells = <1>;
  };

  wdt2: wdt@44e35000 {
   compatible = "ti,omap3-wdt";
   ti,hwmods = "wd_timer2";
   reg = <0x44e35000 0x1000>;
   interrupts = <91>;
  };

  dcan0: can@481cc000 {
   compatible = "ti,am3352-d_can";
   ti,hwmods = "d_can0";
   reg = <0x481cc000 0x2000>;
   clocks = <&dcan0_fck>;
   clock-names = "fck";
   syscon-raminit = <&scm_conf 0x644 0>;
   interrupts = <52>;
   status = "disabled";
  };

  dcan1: can@481d0000 {
   compatible = "ti,am3352-d_can";
   ti,hwmods = "d_can1";
   reg = <0x481d0000 0x2000>;
   clocks = <&dcan1_fck>;
   clock-names = "fck";
   syscon-raminit = <&scm_conf 0x644 1>;
   interrupts = <55>;
   status = "disabled";
  };

  mailbox: mailbox@480C8000 {
   compatible = "ti,omap4-mailbox";
   reg = <0x480C8000 0x200>;
   interrupts = <77>;
   ti,hwmods = "mailbox";
   #mbox-cells = <1>;
   ti,mbox-num-users = <4>;
   ti,mbox-num-fifos = <8>;
   mbox_wkupm3: wkup_m3 {
    ti,mbox-tx = <0 0 0>;
    ti,mbox-rx = <0 0 3>;
   };
  };

  timer1: timer@44e31000 {
   compatible = "ti,am335x-timer-1ms";
   reg = <0x44e31000 0x400>;
   interrupts = <67>;
   ti,hwmods = "timer1";
   ti,timer-alwon;
  };

  timer2: timer@48040000 {
   compatible = "ti,am335x-timer";
   reg = <0x48040000 0x400>;
   interrupts = <68>;
   ti,hwmods = "timer2";
  };

  timer3: timer@48042000 {
   compatible = "ti,am335x-timer";
   reg = <0x48042000 0x400>;
   interrupts = <69>;
   ti,hwmods = "timer3";
  };

  timer4: timer@48044000 {
   compatible = "ti,am335x-timer";
   reg = <0x48044000 0x400>;
   interrupts = <92>;
   ti,hwmods = "timer4";
   ti,timer-pwm;
  };

  timer5: timer@48046000 {
   compatible = "ti,am335x-timer";
   reg = <0x48046000 0x400>;
   interrupts = <93>;
   ti,hwmods = "timer5";
   ti,timer-pwm;
  };

  timer6: timer@48048000 {
   compatible = "ti,am335x-timer";
   reg = <0x48048000 0x400>;
   interrupts = <94>;
   ti,hwmods = "timer6";
   ti,timer-pwm;
  };

  timer7: timer@4804a000 {
   compatible = "ti,am335x-timer";
   reg = <0x4804a000 0x400>;
   interrupts = <95>;
   ti,hwmods = "timer7";
   ti,timer-pwm;
  };

  rtc: rtc@44e3e000 {
   compatible = "ti,am3352-rtc", "ti,da830-rtc";
   reg = <0x44e3e000 0x1000>;
   interrupts = <75
          76>;
   ti,hwmods = "rtc";
  };

  spi0: spi@48030000 {
   compatible = "ti,omap4-mcspi";
   #address-cells = <1>;
   #size-cells = <0>;
   reg = <0x48030000 0x400>;
   interrupts = <65>;
   ti,spi-num-cs = <2>;
   ti,hwmods = "spi0";
   dmas = <&edma 16
    &edma 17
    &edma 18
    &edma 19>;
   dma-names = "tx0", "rx0", "tx1", "rx1";
   status = "disabled";
  };

  spi1: spi@481a0000 {
   compatible = "ti,omap4-mcspi";
   #address-cells = <1>;
   #size-cells = <0>;
   reg = <0x481a0000 0x400>;
   interrupts = <125>;
   ti,spi-num-cs = <2>;
   ti,hwmods = "spi1";
   dmas = <&edma 42
    &edma 43
    &edma 44
    &edma 45>;
   dma-names = "tx0", "rx0", "tx1", "rx1";
   status = "disabled";
  };

  usb: usb@47400000 {
   compatible = "ti,am33xx-usb";
   reg = <0x47400000 0x1000>;
   ranges;
   #address-cells = <1>;
   #size-cells = <1>;
   ti,hwmods = "usb_otg_hs";
   status = "disabled";

   usb_ctrl_mod: control@44e10620 {
    compatible = "ti,am335x-usb-ctrl-module";
    reg = <0x44e10620 0x10
     0x44e10648 0x4>;
    reg-names = "phy_ctrl", "wakeup";
    status = "disabled";
   };

   usb0_phy: usb-phy@47401300 {
    compatible = "ti,am335x-usb-phy";
    reg = <0x47401300 0x100>;
    reg-names = "phy";
    status = "disabled";
    ti,ctrl_mod = <&usb_ctrl_mod>;
   };

   usb0: usb@47401000 {
    compatible = "ti,musb-am33xx";
    status = "disabled";
    reg = <0x47401400 0x400
     0x47401000 0x200>;
    reg-names = "mc", "control";

    interrupts = <18>;
    interrupt-names = "mc";
    dr_mode = "otg";
    mentor,multipoint = <1>;
    mentor,num-eps = <16>;
    mentor,ram-bits = <12>;
    mentor,power = <500>;
    phys = <&usb0_phy>;

    dmas = <&cppi41dma 0 0 &cppi41dma 1 0
     &cppi41dma 2 0 &cppi41dma 3 0
     &cppi41dma 4 0 &cppi41dma 5 0
     &cppi41dma 6 0 &cppi41dma 7 0
     &cppi41dma 8 0 &cppi41dma 9 0
     &cppi41dma 10 0 &cppi41dma 11 0
     &cppi41dma 12 0 &cppi41dma 13 0
     &cppi41dma 14 0 &cppi41dma 0 1
     &cppi41dma 1 1 &cppi41dma 2 1
     &cppi41dma 3 1 &cppi41dma 4 1
     &cppi41dma 5 1 &cppi41dma 6 1
     &cppi41dma 7 1 &cppi41dma 8 1
     &cppi41dma 9 1 &cppi41dma 10 1
     &cppi41dma 11 1 &cppi41dma 12 1
     &cppi41dma 13 1 &cppi41dma 14 1>;
    dma-names =
     "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
     "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
     "rx14", "rx15",
     "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
     "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
     "tx14", "tx15";
   };

   usb1_phy: usb-phy@47401b00 {
    compatible = "ti,am335x-usb-phy";
    reg = <0x47401b00 0x100>;
    reg-names = "phy";
    status = "disabled";
    ti,ctrl_mod = <&usb_ctrl_mod>;
   };

   usb1: usb@47401800 {
    compatible = "ti,musb-am33xx";
    status = "disabled";
    reg = <0x47401c00 0x400
     0x47401800 0x200>;
    reg-names = "mc", "control";
    interrupts = <19>;
    interrupt-names = "mc";
    dr_mode = "otg";
    mentor,multipoint = <1>;
    mentor,num-eps = <16>;
    mentor,ram-bits = <12>;
    mentor,power = <500>;
    phys = <&usb1_phy>;

    dmas = <&cppi41dma 15 0 &cppi41dma 16 0
     &cppi41dma 17 0 &cppi41dma 18 0
     &cppi41dma 19 0 &cppi41dma 20 0
     &cppi41dma 21 0 &cppi41dma 22 0
     &cppi41dma 23 0 &cppi41dma 24 0
     &cppi41dma 25 0 &cppi41dma 26 0
     &cppi41dma 27 0 &cppi41dma 28 0
     &cppi41dma 29 0 &cppi41dma 15 1
     &cppi41dma 16 1 &cppi41dma 17 1
     &cppi41dma 18 1 &cppi41dma 19 1
     &cppi41dma 20 1 &cppi41dma 21 1
     &cppi41dma 22 1 &cppi41dma 23 1
     &cppi41dma 24 1 &cppi41dma 25 1
     &cppi41dma 26 1 &cppi41dma 27 1
     &cppi41dma 28 1 &cppi41dma 29 1>;
    dma-names =
     "rx1", "rx2", "rx3", "rx4", "rx5", "rx6", "rx7",
     "rx8", "rx9", "rx10", "rx11", "rx12", "rx13",
     "rx14", "rx15",
     "tx1", "tx2", "tx3", "tx4", "tx5", "tx6", "tx7",
     "tx8", "tx9", "tx10", "tx11", "tx12", "tx13",
     "tx14", "tx15";
   };

   cppi41dma: dma-controller@47402000 {
    compatible = "ti,am3359-cppi41";
    reg = <0x47400000 0x1000
     0x47402000 0x1000
     0x47403000 0x1000
     0x47404000 0x4000>;
    reg-names = "glue", "controller", "scheduler", "queuemgr";
    interrupts = <17>;
    interrupt-names = "glue";
    #dma-cells = <2>;
    #dma-channels = <30>;
    #dma-requests = <256>;
    status = "disabled";
   };
  };

  epwmss0: epwmss@48300000 {
   compatible = "ti,am33xx-pwmss";
   reg = <0x48300000 0x10>;
   ti,hwmods = "epwmss0";
   #address-cells = <1>;
   #size-cells = <1>;
   status = "disabled";
   ranges = <0x48300100 0x48300100 0x80
      0x48300180 0x48300180 0x80
      0x48300200 0x48300200 0x80>;

   ecap0: ecap@48300100 {
    compatible = "ti,am33xx-ecap";
    #pwm-cells = <3>;
    reg = <0x48300100 0x80>;
    interrupts = <31>;
    interrupt-names = "ecap0";
    ti,hwmods = "ecap0";
    status = "disabled";
   };

   ehrpwm0: ehrpwm@48300200 {
    compatible = "ti,am33xx-ehrpwm";
    #pwm-cells = <3>;
    reg = <0x48300200 0x80>;
    ti,hwmods = "ehrpwm0";
    status = "disabled";
   };
  };

  epwmss1: epwmss@48302000 {
   compatible = "ti,am33xx-pwmss";
   reg = <0x48302000 0x10>;
   ti,hwmods = "epwmss1";
   #address-cells = <1>;
   #size-cells = <1>;
   status = "disabled";
   ranges = <0x48302100 0x48302100 0x80
      0x48302180 0x48302180 0x80
      0x48302200 0x48302200 0x80>;

   ecap1: ecap@48302100 {
    compatible = "ti,am33xx-ecap";
    #pwm-cells = <3>;
    reg = <0x48302100 0x80>;
    interrupts = <47>;
    interrupt-names = "ecap1";
    ti,hwmods = "ecap1";
    status = "disabled";
   };

   ehrpwm1: ehrpwm@48302200 {
    compatible = "ti,am33xx-ehrpwm";
    #pwm-cells = <3>;
    reg = <0x48302200 0x80>;
    ti,hwmods = "ehrpwm1";
    status = "disabled";
   };
  };

  epwmss2: epwmss@48304000 {
   compatible = "ti,am33xx-pwmss";
   reg = <0x48304000 0x10>;
   ti,hwmods = "epwmss2";
   #address-cells = <1>;
   #size-cells = <1>;
   status = "disabled";
   ranges = <0x48304100 0x48304100 0x80
      0x48304180 0x48304180 0x80
      0x48304200 0x48304200 0x80>;

   ecap2: ecap@48304100 {
    compatible = "ti,am33xx-ecap";
    #pwm-cells = <3>;
    reg = <0x48304100 0x80>;
    interrupts = <61>;
    interrupt-names = "ecap2";
    ti,hwmods = "ecap2";
    status = "disabled";
   };

   ehrpwm2: ehrpwm@48304200 {
    compatible = "ti,am33xx-ehrpwm";
    #pwm-cells = <3>;
    reg = <0x48304200 0x80>;
    ti,hwmods = "ehrpwm2";
    status = "disabled";
   };
  };

  mac: ethernet@4a100000 {
   compatible = "ti,cpsw";
   ti,hwmods = "cpgmac0";
   clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
   clock-names = "fck", "cpts";
   cpdma_channels = <8>;
   ale_entries = <1024>;
   bd_ram_size = <0x2000>;
   no_bd_ram = <0>;
   rx_descs = <64>;
   mac_control = <0x20>;
   slaves = <2>;
   active_slave = <0>;
   cpts_clock_mult = <0x80000000>;
   cpts_clock_shift = <29>;
   reg = <0x4a100000 0x800
          0x4a101200 0x100>;
   #address-cells = <1>;
   #size-cells = <1>;
   interrupt-parent = <&intc>;






   interrupts = <40 41 42 43>;
   ranges;
   syscon = <&scm_conf>;
   status = "disabled";

   davinci_mdio: mdio@4a101000 {
    compatible = "ti,davinci_mdio";
    #address-cells = <1>;
    #size-cells = <0>;
    ti,hwmods = "davinci_mdio";
    bus_freq = <1000000>;
    reg = <0x4a101000 0x100>;
    status = "disabled";
   };

   cpsw_emac0: slave@4a100200 {

    mac-address = [ 00 00 00 00 00 00 ];
   };

   cpsw_emac1: slave@4a100300 {

    mac-address = [ 00 00 00 00 00 00 ];
   };

   phy_sel: cpsw-phy-sel@44e10650 {
    compatible = "ti,am3352-cpsw-phy-sel";
    reg= <0x44e10650 0x4>;
    reg-names = "gmii-sel";
   };
  };

  ocmcram: ocmcram@40300000 {
   compatible = "mmio-sram";
   reg = <0x40300000 0x10000>;
  };

  wkup_m3: wkup_m3@44d00000 {
   compatible = "ti,am3353-wkup-m3";
   reg = <0x44d00000 0x4000
          0x44d80000 0x2000>;
   ti,hwmods = "wkup_m3";
   ti,no-reset-on-init;
  };

  elm: elm@48080000 {
   compatible = "ti,am3352-elm";
   reg = <0x48080000 0x2000>;
   interrupts = <4>;
   ti,hwmods = "elm";
   status = "disabled";
  };

  lcdc: lcdc@4830e000 {
   compatible = "ti,am33xx-tilcdc";
   reg = <0x4830e000 0x1000>;
   interrupt-parent = <&intc>;
   interrupts = <36>;
   ti,hwmods = "lcdc";
   status = "disabled";
  };

  tscadc: tscadc@44e0d000 {
   compatible = "ti,am3359-tscadc";
   reg = <0x44e0d000 0x1000>;
   interrupt-parent = <&intc>;
   interrupts = <16>;
   ti,hwmods = "adc_tsc";
   status = "disabled";

   tsc {
    compatible = "ti,am3359-tsc";
   };
   am335x_adc: adc {
    #io-channel-cells = <1>;
    compatible = "ti,am3359-adc";
   };
  };

  gpmc: gpmc@50000000 {
   compatible = "ti,am3352-gpmc";
   ti,hwmods = "gpmc";
   ti,no-idle-on-init;
   reg = <0x50000000 0x2000>;
   interrupts = <100>;
   gpmc,num-cs = <7>;
   gpmc,num-waitpins = <2>;
   #address-cells = <2>;
   #size-cells = <1>;
   status = "disabled";
  };

  sham: sham@53100000 {
   compatible = "ti,omap4-sham";
   ti,hwmods = "sham";
   reg = <0x53100000 0x200>;
   interrupts = <109>;
   dmas = <&edma 36>;
   dma-names = "rx";
  };

  aes: aes@53500000 {
   compatible = "ti,omap4-aes";
   ti,hwmods = "aes";
   reg = <0x53500000 0xa0>;
   interrupts = <103>;
   dmas = <&edma 6>,
          <&edma 5>;
   dma-names = "tx", "rx";
  };

  mcasp0: mcasp@48038000 {
   compatible = "ti,am33xx-mcasp-audio";
   ti,hwmods = "mcasp0";
   reg = <0x48038000 0x2000>,
         <0x46000000 0x400000>;
   reg-names = "mpu", "dat";
   interrupts = <80>, <81>;
   interrupt-names = "tx", "rx";
   status = "disabled";
   dmas = <&edma 8>,
    <&edma 9>;
   dma-names = "tx", "rx";
  };

  mcasp1: mcasp@4803C000 {
   compatible = "ti,am33xx-mcasp-audio";
   ti,hwmods = "mcasp1";
   reg = <0x4803C000 0x2000>,
         <0x46400000 0x400000>;
   reg-names = "mpu", "dat";
   interrupts = <82>, <83>;
   interrupt-names = "tx", "rx";
   status = "disabled";
   dmas = <&edma 10>,
    <&edma 11>;
   dma-names = "tx", "rx";
  };

  rng: rng@48310000 {
   compatible = "ti,omap4-rng";
   ti,hwmods = "rng";
   reg = <0x48310000 0x2000>;
   interrupts = <111>;
  };
 };
};

/include/ "am33xx-clocks.dtsi"
# 11 "<stdin>" 2
# 1 "./arch/arm/dts/include/dt-bindings/interrupt-controller/irq.h" 1
# 12 "<stdin>" 2

/ {
 model = "TI AM335x EVM";
 compatible = "ti,am335x-evm", "ti,am33xx";

 chosen {
  stdout-path = &uart0;
  tick-timer = &timer2;
 };

 cpus {
  cpu@0 {
   cpu0-supply = <&dcdc2_reg>;
  };
 };

 memory {
  device_type = "memory";

  reg = <0x80000000 0x20000000>;
 };

 vbat: fixedregulator@0 {
  compatible = "regulator-fixed";
  regulator-name = "vbat";
  regulator-min-microvolt = <5000000>;
  regulator-max-microvolt = <5000000>;
  regulator-boot-on;
 };

 lis3_reg: fixedregulator@1 {
  compatible = "regulator-fixed";
  regulator-name = "lis3_reg";
  regulator-boot-on;
 };

 wlan_en_reg: fixedregulator@2 {
  compatible = "regulator-fixed";
  regulator-name = "wlan-en-regulator";
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;


  gpio = <&gpio1 16 0>;


  startup-delay-us = <70000>;
  enable-active-high;
 };

 matrix_keypad: matrix_keypad@0 {
  compatible = "gpio-matrix-keypad";
  debounce-delay-ms = <5>;
  col-scan-delay-us = <2>;

  row-gpios = <&gpio1 25 0
        &gpio1 26 0
        &gpio1 27 0>;

  col-gpios = <&gpio1 21 0
        &gpio1 22 0>;

  linux,keymap = <0x0000008b
    0x0100009e
    0x02000069
    0x0001006a
    0x0101001c
    0x0201006c>;
 };

 gpio_keys: volume_keys@0 {
  compatible = "gpio-keys";
  #address-cells = <1>;
  #size-cells = <0>;
  autorepeat;

  switch@9 {
   label = "volume-up";
   linux,code = <115>;
   gpios = <&gpio0 2 1>;
   gpio-key,wakeup;
  };

  switch@10 {
   label = "volume-down";
   linux,code = <114>;
   gpios = <&gpio0 3 1>;
   gpio-key,wakeup;
  };
 };

 backlight {
  compatible = "pwm-backlight";
  pwms = <&ecap0 0 50000 0>;
  brightness-levels = <0 51 53 56 62 75 101 152 255>;
  default-brightness-level = <8>;
 };

 panel {
  compatible = "ti,tilcdc,panel";
  status = "okay";
  pinctrl-names = "default";
  pinctrl-0 = <&lcd_pins_s0>;
  panel-info {
   ac-bias = <255>;
   ac-bias-intrpt = <0>;
   dma-burst-sz = <16>;
   bpp = <32>;
   fdd = <0x80>;
   sync-edge = <0>;
   sync-ctrl = <1>;
   raster-order = <0>;
   fifo-th = <0>;
  };

  display-timings {
   800x480p62 {
    clock-frequency = <30000000>;
    hactive = <800>;
    vactive = <480>;
    hfront-porch = <39>;
    hback-porch = <39>;
    hsync-len = <47>;
    vback-porch = <29>;
    vfront-porch = <13>;
    vsync-len = <2>;
    hsync-active = <1>;
    vsync-active = <1>;
   };
  };
 };

 sound {
  compatible = "ti,da830-evm-audio";
  ti,model = "AM335x-EVM";
  ti,audio-codec = <&tlv320aic3106>;
  ti,mcasp-controller = <&mcasp1>;
  ti,codec-clock-rate = <12000000>;
  ti,audio-routing =
   "Headphone Jack", "HPLOUT",
   "Headphone Jack", "HPROUT",
   "LINE1L", "Line In",
   "LINE1R", "Line In";
 };
};

&am33xx_pinmux {
 pinctrl-names = "default";
 pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;

 matrix_keypad_s0: matrix_keypad_s0 {
  pinctrl-single,pins = <
   0x54 (0 | 7)
   0x58 (0 | 7)
   0x60 (0 | 7)
   0x64 (((1 << 5)) | 7)
   0x68 (((1 << 5)) | 7)
   0x6c (0 | 7)
  >;
 };

 volume_keys_s0: volume_keys_s0 {
  pinctrl-single,pins = <
   0x150 (((1 << 5)) | 7)
   0x154 (((1 << 5)) | 7)
  >;
 };

 i2c0_pins: pinmux_i2c0_pins {
  pinctrl-single,pins = <
   0x188 (((1 << 5) | (1 << 4)) | 0)
   0x18c (((1 << 5) | (1 << 4)) | 0)
  >;
 };

 i2c1_pins: pinmux_i2c1_pins {
  pinctrl-single,pins = <
   0x158 (((1 << 5) | (1 << 4)) | 2)
   0x15c (((1 << 5) | (1 << 4)) | 2)
  >;
 };

 uart0_pins: pinmux_uart0_pins {
  pinctrl-single,pins = <
   0x170 (((1 << 5) | (1 << 4)) | 0)
   0x174 (0 | 0)
  >;
 };

 uart1_pins: pinmux_uart1_pins {
  pinctrl-single,pins = <
   0x178 (((1 << 5) | (1 << 3)) | 0)
   0x17C (0 | 0)
   0x180 (((1 << 5) | (1 << 4)) | 0)
   0x184 (0 | 0)
  >;
 };

 clkout2_pin: pinmux_clkout2_pin {
  pinctrl-single,pins = <
   0x1b4 (0 | 3)
  >;
 };

 nandflash_pins_s0: nandflash_pins_s0 {
  pinctrl-single,pins = <
   0x0 (((1 << 5) | (1 << 4)) | 0)
   0x4 (((1 << 5) | (1 << 4)) | 0)
   0x8 (((1 << 5) | (1 << 4)) | 0)
   0xc (((1 << 5) | (1 << 4)) | 0)
   0x10 (((1 << 5) | (1 << 4)) | 0)
   0x14 (((1 << 5) | (1 << 4)) | 0)
   0x18 (((1 << 5) | (1 << 4)) | 0)
   0x1c (((1 << 5) | (1 << 4)) | 0)
   0x70 (((1 << 5) | (1 << 4)) | 0)
   0x74 (((1 << 5) | (1 << 4)) | 7)
   0x7c (((1 << 3)) | 0)
   0x90 (((1 << 3)) | 0)
   0x94 (((1 << 3)) | 0)
   0x98 (((1 << 3)) | 0)
   0x9c (((1 << 3)) | 0)
  >;
 };

 ecap0_pins: backlight_pins {
  pinctrl-single,pins = <
   0x164 0x0
  >;
 };

 cpsw_default: cpsw_default {
  pinctrl-single,pins = <

   0x110 (((1 << 5)) | 0)
   0x118 (((1 << 5)) | 0)
   0x12c (((1 << 5)) | 0)
   0x130 (((1 << 5)) | 0)
   0x134 (((1 << 5)) | 0)
   0x138 (((1 << 5)) | 0)
   0x13c (((1 << 5)) | 0)
   0x140 (((1 << 5)) | 0)
   0x114 (0 | 0)
   0x11c (0 | 0)
   0x120 (0 | 0)
   0x124 (0 | 0)
   0x128 (0 | 0)
  >;
 };

 cpsw_sleep: cpsw_sleep {
  pinctrl-single,pins = <

   0x110 (((1 << 5)) | 7)


   0x114 (((1 << 5)) | 7)
   0x118 (((1 << 5)) | 7)
   0x11c (((1 << 5)) | 7)
   0x120 (((1 << 5)) | 7)
   0x124 (((1 << 5)) | 7)
   0x128 (((1 << 5)) | 7)
   0x12c (((1 << 5)) | 7)
   0x130 (((1 << 5)) | 7)
   0x134 (((1 << 5)) | 7)
   0x138 (((1 << 5)) | 7)
   0x13c (((1 << 5)) | 7)
   0x140 (((1 << 5)) | 7)
  >;
 };

 davinci_mdio_default: davinci_mdio_default {
  pinctrl-single,pins = <

   0x148 (((1 << 5) | (1 << 4)) | (1 << 6) | 0)
   0x14c (((1 << 4)) | 0)
  >;
 };

 davinci_mdio_sleep: davinci_mdio_sleep {
  pinctrl-single,pins = <

   0x148 (((1 << 5)) | 7)
   0x14c (((1 << 5)) | 7)
  >;
 };
# 305 "<stdin>"
 mmc1_pins_default: pinmux_mmc1_pins {
  pinctrl-single,pins = <
   0x0F0 (((1 << 5) | (1 << 4)) | 0)
   0x0F4 (((1 << 5) | (1 << 4)) | 0)
   0x0F8 (((1 << 5) | (1 << 4)) | 0)
   0x0FC (((1 << 5) | (1 << 4)) | 0)
   0x100 (((1 << 5) | (1 << 4)) | 0)
   0x104 (((1 << 5) | (1 << 4)) | 0)

   0x08C (((1 << 5) | (1 << 3)) | 7)
  >;
 };
 mmc3_pins: pinmux_mmc3_pins {
  pinctrl-single,pins = <
   0x44 (((1 << 5) | (1 << 4)) | 3)
   0x48 (((1 << 5) | (1 << 4)) | 3)
   0x4C (((1 << 5) | (1 << 4)) | 3)
   0x78 (((1 << 5) | (1 << 4)) | 3)
   0x88 (((1 << 5) | (1 << 4)) | 3)
   0x8C (((1 << 5) | (1 << 4)) | 3)
  >;
 };

 wlan_pins: pinmux_wlan_pins {
  pinctrl-single,pins = <
   0x40 (0 | 7)
   0x19C (((1 << 5) | (1 << 3)) | 7)
   0x1AC (0 | 7)
  >;
 };

 lcd_pins_s0: lcd_pins_s0 {
  pinctrl-single,pins = <
   0x20 (((1 << 3)) | 1)
   0x24 (((1 << 3)) | 1)
   0x28 (((1 << 3)) | 1)
   0x2c (((1 << 3)) | 1)
   0x30 (((1 << 3)) | 1)
   0x34 (((1 << 3)) | 1)
   0x38 (((1 << 3)) | 1)
   0x3c (((1 << 3)) | 1)
   0xa0 (((1 << 3)) | 0)
   0xa4 (((1 << 3)) | 0)
   0xa8 (((1 << 3)) | 0)
   0xac (((1 << 3)) | 0)
   0xb0 (((1 << 3)) | 0)
   0xb4 (((1 << 3)) | 0)
   0xb8 (((1 << 3)) | 0)
   0xbc (((1 << 3)) | 0)
   0xc0 (((1 << 3)) | 0)
   0xc4 (((1 << 3)) | 0)
   0xc8 (((1 << 3)) | 0)
   0xcc (((1 << 3)) | 0)
   0xd0 (((1 << 3)) | 0)
   0xd4 (((1 << 3)) | 0)
   0xd8 (((1 << 3)) | 0)
   0xdc (((1 << 3)) | 0)
   0xe0 (((1 << 3)) | 0)
   0xe4 (((1 << 3)) | 0)
   0xe8 (((1 << 3)) | 0)
   0xec (((1 << 3)) | 0)
  >;
 };
# 378 "<stdin>"
 dcan1_pins_default: dcan1_pins_default {
  pinctrl-single,pins = <
   0x168 (((1 << 3)) | 2)
   0x16c (((1 << 5)) | 2)
  >;
 };
};

&uart0 {
 pinctrl-names = "default";
 pinctrl-0 = <&uart0_pins>;

 status = "okay";
};

&uart1 {
 pinctrl-names = "default";
 pinctrl-0 = <&uart1_pins>;

 status = "okay";
};

&i2c0 {
 pinctrl-names = "default";
 pinctrl-0 = <&i2c0_pins>;

 status = "okay";
 clock-frequency = <400000>;

 tps: tps@24 {
  reg = <0x24>;
 };
};

&usb {
 status = "okay";
};

&usb_ctrl_mod {
 status = "okay";
};

&usb0_phy {
 status = "okay";
};

&usb1_phy {
 status = "okay";
};

&usb0 {
 status = "okay";
};

&usb1 {
 status = "okay";
 dr_mode = "host";
};

&cppi41dma {
 status = "okay";
};

&i2c1 {
 pinctrl-names = "default";
 pinctrl-0 = <&i2c1_pins>;

 status = "okay";
 clock-frequency = <100000>;

 lis331dlh: lis331dlh@18 {
  compatible = "st,lis331dlh", "st,lis3lv02d";
  reg = <0x18>;
  Vdd-supply = <&lis3_reg>;
  Vdd_IO-supply = <&lis3_reg>;

  st,click-single-x;
  st,click-single-y;
  st,click-single-z;
  st,click-thresh-x = <10>;
  st,click-thresh-y = <10>;
  st,click-thresh-z = <10>;
  st,irq1-click;
  st,irq2-click;
  st,wakeup-x-lo;
  st,wakeup-x-hi;
  st,wakeup-y-lo;
  st,wakeup-y-hi;
  st,wakeup-z-lo;
  st,wakeup-z-hi;
  st,min-limit-x = <120>;
  st,min-limit-y = <120>;
  st,min-limit-z = <140>;
  st,max-limit-x = <550>;
  st,max-limit-y = <550>;
  st,max-limit-z = <750>;
 };

 tsl2550: tsl2550@39 {
  compatible = "taos,tsl2550";
  reg = <0x39>;
 };

 tmp275: tmp275@48 {
  compatible = "ti,tmp275";
  reg = <0x48>;
 };

 tlv320aic3106: tlv320aic3106@1b {
  compatible = "ti,tlv320aic3106";
  reg = <0x1b>;
  status = "okay";


  AVDD-supply = <&ldo2_reg>;
  IOVDD-supply = <&ldo2_reg>;
  DRVDD-supply = <&ldo2_reg>;
  DVDD-supply = <&vbat>;
 };
};

&lcdc {
 status = "okay";
};

&elm {
 status = "okay";
};

&epwmss0 {
 status = "okay";

 ecap0: ecap@48300100 {
  status = "okay";
  pinctrl-names = "default";
  pinctrl-0 = <&ecap0_pins>;
 };
};

&gpmc {
 status = "okay";
 pinctrl-names = "default";
 pinctrl-0 = <&nandflash_pins_s0>;

 ranges = <0 0 0x08000000 0x40000000>;
 nand@0,0 {
  reg = <0 0 4>;
  ti,nand-ecc-opt = "bch16";
  ti,elm-id = <&elm>;
  nand-bus-width = <8>;
  gpmc,device-width = <1>;
  gpmc,sync-clk-ps = <0>;
  gpmc,cs-on-ns = <0>;
  gpmc,cs-rd-off-ns = <44>;
  gpmc,cs-wr-off-ns = <44>;
  gpmc,adv-on-ns = <6>;
  gpmc,adv-rd-off-ns = <34>;
  gpmc,adv-wr-off-ns = <44>;
  gpmc,we-on-ns = <0>;
  gpmc,we-off-ns = <40>;
  gpmc,oe-on-ns = <0>;
  gpmc,oe-off-ns = <54>;
  gpmc,access-ns = <64>;
  gpmc,rd-cycle-ns = <82>;
  gpmc,wr-cycle-ns = <82>;
  gpmc,wait-on-read = "true";
  gpmc,wait-on-write = "true";
  gpmc,bus-turnaround-ns = <0>;
  gpmc,cycle2cycle-delay-ns = <0>;
  gpmc,clk-activation-ns = <0>;
  gpmc,wait-monitoring-ns = <0>;
  gpmc,wr-access-ns = <40>;
  gpmc,wr-data-mux-bus-ns = <0>;




  #address-cells = <1>;
  #size-cells = <1>;
  partition@0 {
   label = "SPL";
   reg = <0x00000000 0x00080000>;
  };
  partition@1 {
   label = "Primary u-boot";
   reg = <0x00080000 0x00100000>;
  };
  partition@2 {
   label = "u-boot-env";
   reg = <0x00180000 0x00080000>;
  };
  partition@3 {
   label = "Secondary u-boot";
   reg = <0x00200000 0x00100000>;
  };
  partition@4 {
   label = "Primary dtb";
   reg = <0x00300000 0x00080000>;
  };
  partition@5 {
   label = "Secondary dtb";
   reg = <0x00380000 0x00080000>;
  };
  partition@6 {
   label = "Primary kernel";
   reg = <0x00400000 0x00A00000>;
  };
  partition@7 {
   label = "Secondary kernel";
   reg = <0x00E00000 0x00A00000>;
  };
  partition@8 {
   label = "Primary rootfs";
   reg = <0x03000000 0x03000000>;
  };
  partition@9 {
   label = "Secondary rootfs";
   reg = <0x06000000 0x03000000>;
  };
  partition@10 {
   label = "Primary user configuration";
   reg = <0x09000000 0x00600000>;
  };
  partition@11 {
   label = "Secondary user configuration";
   reg = <0x09600000 0x00600000>;
  };
  partition@12 {
   label = "Factory default configuration";
   reg = <0x09C00000 0x00600000>;
  };
  partition@13 {
   label = "Storage";
   reg = <0x0A200000 0x35E00000>;
  };
 };
};

/include/ "tps65217.dtsi"

&tps {
# 636 "<stdin>"
 ti,pmic-shutdown-controller;

 regulators {
  dcdc1_reg: regulator@0 {
   regulator-name = "vdds_dpr";
   regulator-always-on;
  };

  dcdc2_reg: regulator@1 {

   regulator-name = "vdd_mpu";
   regulator-min-microvolt = <1100000>;
   regulator-max-microvolt = <1325000>;
   regulator-boot-on;
   regulator-always-on;
  };

  dcdc3_reg: regulator@2 {

   regulator-name = "vdd_core";
   regulator-min-microvolt = <925000>;
   regulator-max-microvolt = <1150000>;
   regulator-boot-on;
   regulator-always-on;
  };

  ldo1_reg: regulator@3 {
   regulator-name = "vio,vrtc,vdds";
   regulator-always-on;
  };

  ldo2_reg: regulator@4 {
   regulator-name = "vdd_3v3aux";
   regulator-always-on;
  };

  ldo3_reg: regulator@5 {
   regulator-name = "vdd_1v8";
   regulator-always-on;
  };

  ldo4_reg: regulator@6 {
   regulator-name = "vdd_3v3a";
   regulator-always-on;
  };
 };
};

&mac {
 pinctrl-names = "default", "sleep";
 pinctrl-0 = <&cpsw_default>;
 pinctrl-1 = <&cpsw_sleep>;
 status = "okay";
};

&davinci_mdio {
 pinctrl-names = "default", "sleep";
 pinctrl-0 = <&davinci_mdio_default>;
 pinctrl-1 = <&davinci_mdio_sleep>;
 status = "okay";
};

&cpsw_emac0 {
 phy_id = <&davinci_mdio>, <1>;
 phy-mode = "mii";
};

&cpsw_emac1 {
 phy_id = <&davinci_mdio>, <2>;
 phy-mode = "mii";
};

&tscadc {
 status = "okay";
 tsc {
  ti,wires = <4>;
  ti,x-plate-resistance = <200>;
  ti,coordinate-readouts = <5>;
  ti,wire-config = <0x00 0x11 0x22 0x33>;
  ti,charge-delay = <0x400>;
 };

 adc {
  ti,adc-channels = <4 5 6 7>;
 };
};

&mmc1 {
 status = "okay";
 vmmc-supply = <&ldo4_reg>;
 bus-width = <4>;
 pinctrl-names = "default";
 pinctrl-0 = <&mmc1_pins_default>;
 cd-gpios = <&gpio2 1 1>;
};


&mmc3 {


 dmas = <&edma 12
  &edma 13>;
 dma-names = "tx", "rx";
 status = "okay";
 vmmc-supply = <&wlan_en_reg>;
 bus-width = <4>;
 pinctrl-names = "default";
 pinctrl-0 = <&mmc3_pins &wlan_pins>;
 ti,non-removable;
 ti,needs-special-hs-handling;
 cap-power-off-card;
 keep-power-in-suspend;

 #address-cells = <1>;
 #size-cells = <0>;
 wlcore: wlcore@0 {
  compatible = "ti,wl1835";
  reg = <2>;
  interrupt-parent = <&gpio3>;
  interrupts = <17 4>;
 };
};

&edma {
 ti,edma-xbar-event-map = /bits/ 16 <1 12
         2 13>;
};

&sham {
 status = "okay";
};

&aes {
 status = "okay";
};

&dcan1 {
 status = "disabled";
 pinctrl-names = "default";
 pinctrl-0 = <&dcan1_pins_default>;
};