#ifndef MODULE_EVCOMM_H_ #define MODULE_EVCOMM_H_ #include int CanFd; typedef unsigned char byte; extern struct Ev_Board_Cmd { int none; // 0 int address_assignment; // 0x00000200 int get_firmware_ver; // 0x00000400 int get_hardware_ver; // 0x00000500 int charging_permission; // 0x00000600 int present_output_power; // 0x00000700 int present_output_cap; // 0x00000800 int get_output_req; // 0x00000900 int get_battery_info; // 0x00000A00 int evse_stop_charging; // 0x00000C00 int get_miscellaneous_info; // 0x00000D00 int download_req; // 0x00000E00 int start_block_transfer; // 0x00000F00 int data_transfer; // 0x00001000 int download_finish; // 0x00001100 int isolation_status; // 0x00001200 int sync_rtc_info; // 0x00001400 int evse_precharge_info; // 0x00001500 }Ev_Cmd; extern struct Ev_Cmd_Dir { unsigned short master_to_slave; unsigned short slave_to_master; }Ev_Dir; struct timeval _id_assign_time; // Send msg to can-bus void SetTargetAddr(byte *target_number, byte index); void GetFirmwareVersion(byte gun_index, byte toId); void SyncRtcInfo(byte gun_index, byte toId, int epoch); void GetHardwareVersion(byte gun_index, byte toId); void SetChargingPermission(byte gun_index, byte permissionStatus, short aOutputPw, short aOutputVol, short aOutputCur, byte toId); void SetPresentOutputPower(short outputVol_b1, short outputCur_b1, short outputVol_b2, short outputCur_b2); void SetPresentOutputCapacity(short aOutputPw_b1, short aOutputCur_b1, short aOutputPw_b2, short aOutputCur_b2); void GetOutputReq(byte gun_index, byte toId); void GetEvBatteryInfo(byte gun_index, byte toId); void GetMiscellaneousInfo(byte gun_index, byte relayStatus, float power, float voltage, byte toId); void SetIsolationStatus(byte gun_index, byte result, byte toId); void SetEvsePrechargeInfo(byte gun_index, byte result, byte toId); // 發送電樁主動停止充電結果及原因 void EvseStopChargingEvent(byte stopResult, byte *stopReason, byte toId); // Receive msg From can-bus. enum Receieve_PSU_msgf { // 車端主動 ADDRESS_REQ = 0x080001FF, NOTIFICATION_EV_STATUS = 0x08000300, NOTIFICATION_EV_STOP = 0x08000B00, // 車端回應 ACK_EV_FW_VERSION = 0x08000400, ACK_EV_HW_VERSION = 0x08000500, ACK_GET_OUTPUT_REQ = 0x08000900, ACK_GET_EV_BATTERY_INFO = 0x08000A00, ACK_GET_MISCELLANEOUS_INFO = 0x08000D00, ACK_EVSE_ISOLATION_STATUS = 0x08001200, ACK_EVSE_PRECHAGE_INFO = 0x08001500, }; #endif /* MODULE_EVCOMM_H_ */