# Makefile for PO directory in any package using GNU gettext. # Copyright (C) 1995-1997, 2000-2007, 2009-2010 by Ulrich Drepper # # This file can be copied and used freely without restrictions. It can # be used in projects which are not available under the GNU General Public # License but which still want to provide support for the GNU gettext # functionality. # Please note that the actual code of GNU gettext is covered by the GNU # General Public License and is *not* in the public domain. # # Origin: gettext-0.18.3 GETTEXT_MACRO_VERSION = 0.18 PACKAGE = Linux-PAM VERSION = 1.5.2 PACKAGE_BUGREPORT = SED = /bin/sed SHELL = /bin/sh srcdir = . top_srcdir = .. prefix = /opt/ti-processor-sdk-linux-am335x-evm-04.02.00.09/EVSE/GPL/linux-pam-1.5.2/release exec_prefix = ${prefix} datarootdir = ${prefix}/share datadir = ${datarootdir} localedir = ${datarootdir}/locale gettextsrcdir = $(datadir)/gettext/po INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 # We use $(mkdir_p). # In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as # "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions, # ${SHELL} /opt/ti-processor-sdk-linux-am335x-evm-04.02.00.09/EVSE/GPL/linux-pam-1.5.2/build-aux/install-sh does not start with $(SHELL), so we add it. # In automake >= 1.10, $(MKDIR_P) is derived from ${MKDIR_P}, which is defined # either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake # versions, $(mkinstalldirs) and $(install_sh) are unused. mkinstalldirs = $(SHELL) ${SHELL} /opt/ti-processor-sdk-linux-am335x-evm-04.02.00.09/EVSE/GPL/linux-pam-1.5.2/build-aux/install-sh -d install_sh = $(SHELL) ${SHELL} /opt/ti-processor-sdk-linux-am335x-evm-04.02.00.09/EVSE/GPL/linux-pam-1.5.2/build-aux/install-sh MKDIR_P = /bin/mkdir -p mkdir_p = $(MKDIR_P) GMSGFMT_ = /usr/bin/msgfmt GMSGFMT_no = /usr/bin/msgfmt GMSGFMT_yes = /usr/bin/msgfmt GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT)) MSGFMT_ = /usr/bin/msgfmt MSGFMT_no = /usr/bin/msgfmt MSGFMT_yes = /usr/bin/msgfmt MSGFMT = $(MSGFMT_$(USE_MSGCTXT)) XGETTEXT_ = /usr/bin/xgettext XGETTEXT_no = /usr/bin/xgettext XGETTEXT_yes = /usr/bin/xgettext XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT)) MSGMERGE = msgmerge MSGMERGE_UPDATE = /usr/bin/msgmerge --update MSGINIT = msginit MSGCONV = msgconv MSGFILTER = msgfilter POFILES = af.po am.po ar.po as.po be.po bg.po bn_IN.po bn.po bs.po ca.po cs.po cy.po da.po de_CH.po de.po el.po eo.po es.po et.po eu.po fa.po fi.po fr.po ga.po gl.po gu.po he.po hi.po hr.po hu.po ia.po id.po is.po it.po ja.po ka.po kk.po km.po kn.po ko.po kw_GB.po ky.po lt.po lv.po mk.po ml.po mn.po mr.po ms.po my.po nb.po ne.po nl.po nn.po or.po pa.po pl.po pt_BR.po pt.po ro.po ru.po si.po sk.po sl.po sq.po sr@latin.po sr.po sv.po ta.po te.po tg.po th.po tr.po uk.po ur.po vi.po yo.po zh_CN.po zh_HK.po zh_TW.po zu.po az.po GMOFILES = af.gmo am.gmo ar.gmo as.gmo be.gmo bg.gmo bn_IN.gmo bn.gmo bs.gmo ca.gmo cs.gmo cy.gmo da.gmo de_CH.gmo de.gmo el.gmo eo.gmo es.gmo et.gmo eu.gmo fa.gmo fi.gmo fr.gmo ga.gmo gl.gmo gu.gmo he.gmo hi.gmo hr.gmo hu.gmo ia.gmo id.gmo is.gmo it.gmo ja.gmo ka.gmo kk.gmo km.gmo kn.gmo ko.gmo kw_GB.gmo ky.gmo lt.gmo lv.gmo mk.gmo ml.gmo mn.gmo mr.gmo ms.gmo my.gmo nb.gmo ne.gmo nl.gmo nn.gmo or.gmo pa.gmo pl.gmo pt_BR.gmo pt.gmo ro.gmo ru.gmo si.gmo sk.gmo sl.gmo sq.gmo sr@latin.gmo sr.gmo sv.gmo ta.gmo te.gmo tg.gmo th.gmo tr.gmo uk.gmo ur.gmo vi.gmo yo.gmo zh_CN.gmo zh_HK.gmo zh_TW.gmo zu.gmo az.gmo UPDATEPOFILES = af.po-update am.po-update ar.po-update as.po-update be.po-update bg.po-update bn_IN.po-update bn.po-update bs.po-update ca.po-update cs.po-update cy.po-update da.po-update de_CH.po-update de.po-update el.po-update eo.po-update es.po-update et.po-update eu.po-update fa.po-update fi.po-update fr.po-update ga.po-update gl.po-update gu.po-update he.po-update hi.po-update hr.po-update hu.po-update ia.po-update id.po-update is.po-update it.po-update ja.po-update ka.po-update kk.po-update km.po-update kn.po-update ko.po-update kw_GB.po-update ky.po-update lt.po-update lv.po-update mk.po-update ml.po-update mn.po-update mr.po-update ms.po-update my.po-update nb.po-update ne.po-update nl.po-update nn.po-update or.po-update pa.po-update pl.po-update pt_BR.po-update pt.po-update ro.po-update ru.po-update si.po-update sk.po-update sl.po-update sq.po-update sr@latin.po-update sr.po-update sv.po-update ta.po-update te.po-update tg.po-update th.po-update tr.po-update uk.po-update ur.po-update vi.po-update yo.po-update zh_CN.po-update zh_HK.po-update zh_TW.po-update zu.po-update az.po-update DUMMYPOFILES = af.nop am.nop ar.nop as.nop be.nop bg.nop bn_IN.nop bn.nop bs.nop ca.nop cs.nop cy.nop da.nop de_CH.nop de.nop el.nop eo.nop es.nop et.nop eu.nop fa.nop fi.nop fr.nop ga.nop gl.nop gu.nop he.nop hi.nop hr.nop hu.nop ia.nop id.nop is.nop it.nop ja.nop ka.nop kk.nop km.nop kn.nop ko.nop kw_GB.nop ky.nop lt.nop lv.nop mk.nop ml.nop mn.nop mr.nop ms.nop my.nop nb.nop ne.nop nl.nop nn.nop or.nop pa.nop pl.nop pt_BR.nop pt.nop ro.nop ru.nop si.nop sk.nop sl.nop sq.nop sr@latin.nop sr.nop sv.nop ta.nop te.nop tg.nop th.nop tr.nop uk.nop ur.nop vi.nop yo.nop zh_CN.nop zh_HK.nop zh_TW.nop zu.nop az.nop DISTFILES.common = Makefile.in.in remove-potcdate.sin \ $(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \ $(POFILES) $(GMOFILES) \ $(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) POTFILES = \ ../libpam/pam_account.c \ ../libpam/pam_audit.c \ ../libpam/pam_auth.c \ ../libpam/pam_data.c \ ../libpam/pam_delay.c \ ../libpam/pam_dispatch.c \ ../libpam/pam_dynamic.c \ ../libpam/pam_end.c \ ../libpam/pam_env.c \ ../libpam/pam_get_authtok.c \ ../libpam/pam_handlers.c \ ../libpam/pam_item.c \ ../libpam/pam_misc.c \ ../libpam/pam_modutil_cleanup.c \ ../libpam/pam_modutil_getgrgid.c \ ../libpam/pam_modutil_getgrnam.c \ ../libpam/pam_modutil_getlogin.c \ ../libpam/pam_modutil_getpwnam.c \ ../libpam/pam_modutil_getpwuid.c \ ../libpam/pam_modutil_getspnam.c \ ../libpam/pam_modutil_ingroup.c \ ../libpam/pam_modutil_ioloop.c \ ../libpam/pam_password.c \ ../libpam/pam_prelude.c \ ../libpam/pam_session.c \ ../libpam/pam_start.c \ ../libpam/pam_strerror.c \ ../libpam/pam_syslog.c \ ../libpam/pam_vprompt.c \ ../libpam_misc/help_env.c \ ../libpam_misc/misc_conv.c \ ../libpamc/pamc_client.c \ ../libpamc/pamc_converse.c \ ../libpamc/pamc_load.c \ ../modules/pam_access/pam_access.c \ ../modules/pam_debug/pam_debug.c \ ../modules/pam_deny/pam_deny.c \ ../modules/pam_echo/pam_echo.c \ ../modules/pam_env/pam_env.c \ ../modules/pam_exec/pam_exec.c \ ../modules/pam_faildelay/pam_faildelay.c \ ../modules/pam_faillock/main.c \ ../modules/pam_faillock/pam_faillock.c \ ../modules/pam_filter/pam_filter.c \ ../modules/pam_filter/upperLOWER/upperLOWER.c \ ../modules/pam_ftp/pam_ftp.c \ ../modules/pam_group/pam_group.c \ ../modules/pam_issue/pam_issue.c \ ../modules/pam_keyinit/pam_keyinit.c \ ../modules/pam_lastlog/pam_lastlog.c \ ../modules/pam_limits/pam_limits.c \ ../modules/pam_listfile/pam_listfile.c \ ../modules/pam_localuser/pam_localuser.c \ ../modules/pam_loginuid/pam_loginuid.c \ ../modules/pam_mail/pam_mail.c \ ../modules/pam_mkhomedir/pam_mkhomedir.c \ ../modules/pam_motd/pam_motd.c \ ../modules/pam_namespace/md5.c \ ../modules/pam_namespace/pam_namespace.c \ ../modules/pam_nologin/pam_nologin.c \ ../modules/pam_permit/pam_permit.c \ ../modules/pam_pwhistory/opasswd.c \ ../modules/pam_pwhistory/pam_pwhistory.c \ ../modules/pam_rhosts/pam_rhosts.c \ ../modules/pam_rootok/pam_rootok.c \ ../modules/pam_securetty/pam_securetty.c \ ../modules/pam_selinux/pam_selinux.c \ ../modules/pam_selinux/pam_selinux_check.c \ ../modules/pam_sepermit/pam_sepermit.c \ ../modules/pam_shells/pam_shells.c \ ../modules/pam_stress/pam_stress.c \ ../modules/pam_succeed_if/pam_succeed_if.c \ ../modules/pam_time/pam_time.c \ ../modules/pam_timestamp/pam_timestamp.c \ ../modules/pam_timestamp/pam_timestamp_check.c \ ../modules/pam_tty_audit/pam_tty_audit.c \ ../modules/pam_umask/pam_umask.c \ ../modules/pam_unix/bigcrypt.c \ ../modules/pam_unix/bigcrypt_main.c \ ../modules/pam_unix/md5.c \ ../modules/pam_unix/md5_broken.c \ ../modules/pam_unix/md5_crypt.c \ ../modules/pam_unix/md5_good.c \ ../modules/pam_unix/pam_unix_acct.c \ ../modules/pam_unix/pam_unix_auth.c \ ../modules/pam_unix/pam_unix_passwd.c \ ../modules/pam_unix/pam_unix_sess.c \ ../modules/pam_unix/passverify.c \ ../modules/pam_unix/support.c \ ../modules/pam_unix/unix_chkpwd.c \ ../modules/pam_unix/yppasswd_xdr.c \ ../modules/pam_userdb/pam_userdb.c \ ../modules/pam_warn/pam_warn.c \ ../modules/pam_wheel/pam_wheel.c \ ../modules/pam_xauth/pam_xauth.c CATALOGS = af.gmo am.gmo ar.gmo as.gmo be.gmo bg.gmo bn_IN.gmo bn.gmo bs.gmo ca.gmo cs.gmo cy.gmo da.gmo de_CH.gmo de.gmo el.gmo eo.gmo es.gmo et.gmo eu.gmo fa.gmo fi.gmo fr.gmo ga.gmo gl.gmo gu.gmo he.gmo hi.gmo hr.gmo hu.gmo ia.gmo id.gmo is.gmo it.gmo ja.gmo ka.gmo kk.gmo km.gmo kn.gmo ko.gmo kw_GB.gmo ky.gmo lt.gmo lv.gmo mk.gmo ml.gmo mn.gmo mr.gmo ms.gmo my.gmo nb.gmo ne.gmo nl.gmo nn.gmo or.gmo pa.gmo pl.gmo pt_BR.gmo pt.gmo ro.gmo ru.gmo si.gmo sk.gmo sl.gmo sq.gmo sr@latin.gmo sr.gmo sv.gmo ta.gmo te.gmo tg.gmo th.gmo tr.gmo uk.gmo ur.gmo vi.gmo yo.gmo zh_CN.gmo zh_HK.gmo zh_TW.gmo zu.gmo az.gmo # Makevars gets inserted here. (Don't remove this line!) # Makefile variables for PO directory in any package using GNU gettext. # Usually the message domain is the same as the package name. DOMAIN = $(PACKAGE) # These two variables depend on the location of this directory. subdir = po top_builddir = .. # These options get passed to xgettext. XGETTEXT_OPTIONS = -E --keyword=_ --keyword=N_ # This is the copyright holder that gets inserted into the header of the # $(DOMAIN).pot file. Set this to the copyright holder of the surrounding # package. (Note that the msgstr strings, extracted from the package's # sources, belong to the copyright holder of the package.) Translators are # expected to transfer the copyright for their translations to this person # or entity, or to disclaim their copyright. The empty string stands for # the public domain; in this case the translators are expected to disclaim # their copyright. COPYRIGHT_HOLDER = Linux-PAM Project # This is the email address or URL to which the translators shall report # bugs in the untranslated strings: # - Strings which are not entire sentences, see the maintainer guidelines # in the GNU gettext documentation, section 'Preparing Strings'. # - Strings which use unclear terms or require additional context to be # understood. # - Strings which make invalid assumptions about notation of date, time or # money. # - Pluralisation problems. # - Incorrect English spelling. # - Incorrect formatting. # It can be your email address, or a mailing list address where translators # can write to without being subscribed, or the URL of a web page through # which the translators can contact you. MSGID_BUGS_ADDRESS = https://github.com/linux-pam/linux-pam/issues # This is the list of locale categories, beyond LC_MESSAGES, for which the # message catalogs shall be used. It is usually empty. EXTRA_LOCALE_CATEGORIES = # This tells whether the $(DOMAIN).pot file contains messages with an 'msgctxt' # context. Possible values are "yes" and "no". Set this to yes if the # package uses functions taking also a message context, like pgettext(), or # if in $(XGETTEXT_OPTIONS) you define keywords with a context argument. USE_MSGCTXT = no # These options get passed to msgmerge. # Useful options are in particular: # --previous to keep previous msgids of translated messages, # --quiet to reduce the verbosity. MSGMERGE_OPTIONS = .SUFFIXES: .SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update .po.mo: @echo "$(MSGFMT) -c -o $@ $<"; \ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ .po.gmo: @lang=`echo $* | sed -e 's,.*/,,'`; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o $${lang}.gmo $${lang}.po"; \ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics --verbose -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo .sin.sed: sed -e '/^#/d' $< > t-$@ mv t-$@ $@ all: all-yes all-yes: stamp-po all-no: # Ensure that the gettext macros and this Makefile.in.in are in sync. CHECK_MACRO_VERSION = \ test "$(GETTEXT_MACRO_VERSION)" = "0.18" \ || { echo "*** error: gettext infrastructure mismatch: using a Makefile.in.in from gettext version $(GETTEXT_MACRO_VERSION) but the autoconf macros are from gettext version 0.18" 1>&2; \ exit 1; \ } # $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no # internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because # we don't want to bother translators with empty POT files). We assume that # LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty. # In this case, stamp-po is a nop (i.e. a phony target). # stamp-po is a timestamp denoting the last time at which the CATALOGS have # been loosely updated. Its purpose is that when a developer or translator # checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, # "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent # invocations of "make" will do nothing. This timestamp would not be necessary # if updating the $(CATALOGS) would always touch them; however, the rule for # $(POFILES) has been designed to not touch files that don't need to be # changed. stamp-po: $(srcdir)/$(DOMAIN).pot @$(CHECK_MACRO_VERSION) test ! -f $(srcdir)/$(DOMAIN).pot || \ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES) @test ! -f $(srcdir)/$(DOMAIN).pot || { \ echo "touch stamp-po" && \ echo timestamp > stamp-poT && \ mv stamp-poT stamp-po; \ } # Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', # otherwise packages like GCC can not be built if only parts of the source # have been downloaded. # This target rebuilds $(DOMAIN).pot; it is an expensive operation. # Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. # The determination of whether the package xyz is a GNU one is based on the # heuristic whether some file in the top level directory mentions "GNU xyz". # If GNU 'find' is available, we avoid grepping through monster files. $(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed if { if (LC_ALL=C find --version) 2>/dev/null | grep GNU >/dev/null; then \ LC_ALL=C find -L $(top_srcdir) -maxdepth 1 -type f -size -10000000c -exec grep 'GNU Linux-PAM' /dev/null '{}' ';' 2>/dev/null; \ else \ LC_ALL=C grep 'GNU Linux-PAM' $(top_srcdir)/* 2>/dev/null; \ fi; \ } | grep -v 'libtool:' >/dev/null; then \ package_gnu='GNU '; \ else \ package_gnu=''; \ fi; \ if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \ msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \ else \ msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \ fi; \ case `$(XGETTEXT) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-5] | 0.1[0-5].* | 0.16 | 0.16.[0-1]*) \ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \ --files-from=$(srcdir)/POTFILES.in \ --copyright-holder='$(COPYRIGHT_HOLDER)' \ --msgid-bugs-address="$$msgid_bugs_address" \ ;; \ *) \ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \ --files-from=$(srcdir)/POTFILES.in \ --copyright-holder='$(COPYRIGHT_HOLDER)' \ --package-name="$${package_gnu}Linux-PAM" \ --package-version='1.5.2' \ --msgid-bugs-address="$$msgid_bugs_address" \ ;; \ esac test ! -f $(DOMAIN).po || { \ if test -f $(srcdir)/$(DOMAIN).pot; then \ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ else \ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ else \ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ fi; \ } # This rule has no dependencies: we don't need to update $(DOMAIN).pot at # every "make" invocation, only create it when it is missing. # Only "make $(DOMAIN).pot-update" or "make dist" will force an update. $(srcdir)/$(DOMAIN).pot: $(MAKE) $(DOMAIN).pot-update # This target rebuilds a PO file if $(DOMAIN).pot has changed. # Note that a PO file is not touched if it doesn't need to be changed. $(POFILES): $(srcdir)/$(DOMAIN).pot @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ if test -f "$(srcdir)/$${lang}.po"; then \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot"; \ cd $(srcdir) \ && { case `$(MSGMERGE_UPDATE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) $${lang}.po $(DOMAIN).pot;; \ *) \ $(MSGMERGE_UPDATE) $(MSGMERGE_OPTIONS) --lang=$${lang} $${lang}.po $(DOMAIN).pot;; \ esac; \ }; \ else \ $(MAKE) $${lang}.po-create; \ fi install: install-exec install-data install-exec: install-data: install-data-yes if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ for file in $(DISTFILES.common) Makevars.template; do \ $(INSTALL_DATA) $(srcdir)/$$file \ $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ for file in Makevars; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi install-data-no: all install-data-yes: all @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $(DESTDIR)$$dir; \ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ fi; \ done; \ done install-strip: install installdirs: installdirs-exec installdirs-data installdirs-exec: installdirs-data: installdirs-data-yes if test "$(PACKAGE)" = "gettext-tools"; then \ $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \ else \ : ; \ fi installdirs-data-no: installdirs-data-yes: @catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ dir=$(localedir)/$$lang/LC_MESSAGES; \ $(mkdir_p) $(DESTDIR)$$dir; \ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ if test -n "$$lc"; then \ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ for file in *; do \ if test -f $$file; then \ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ fi; \ done); \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ else \ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ :; \ else \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ fi; \ fi; \ fi; \ done; \ done # Define this as empty until I found a useful application. installcheck: uninstall: uninstall-exec uninstall-data uninstall-exec: uninstall-data: uninstall-data-yes if test "$(PACKAGE)" = "gettext-tools"; then \ for file in $(DISTFILES.common) Makevars.template; do \ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ done; \ else \ : ; \ fi uninstall-data-no: uninstall-data-yes: catalogs='$(CATALOGS)'; \ for cat in $$catalogs; do \ cat=`basename $$cat`; \ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ done; \ done check: all info dvi ps pdf html tags TAGS ctags CTAGS ID: mostlyclean: rm -f remove-potcdate.sed rm -f stamp-poT rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po rm -fr *.o clean: mostlyclean distclean: clean rm -f Makefile Makefile.in POTFILES *.mo maintainer-clean: distclean @echo "This command is intended for maintainers to use;" @echo "it deletes files that may require special tools to rebuild." rm -f stamp-po $(GMOFILES) distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) dist distdir: $(MAKE) update-po @$(MAKE) dist2 # This is a separate target because 'update-po' must be executed before. dist2: stamp-po $(DISTFILES) dists="$(DISTFILES)"; \ if test "$(PACKAGE)" = "gettext-tools"; then \ dists="$$dists Makevars.template"; \ fi; \ if test -f $(srcdir)/$(DOMAIN).pot; then \ dists="$$dists $(DOMAIN).pot stamp-po"; \ fi; \ if test -f $(srcdir)/ChangeLog; then \ dists="$$dists ChangeLog"; \ fi; \ for i in 0 1 2 3 4 5 6 7 8 9; do \ if test -f $(srcdir)/ChangeLog.$$i; then \ dists="$$dists ChangeLog.$$i"; \ fi; \ done; \ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ for file in $$dists; do \ if test -f $$file; then \ cp -p $$file $(distdir) || exit 1; \ else \ cp -p $(srcdir)/$$file $(distdir) || exit 1; \ fi; \ done update-po: Makefile $(MAKE) $(DOMAIN).pot-update test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) $(MAKE) update-gmo # General rule for creating PO files. .nop.po-create: @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \ exit 1 # General rule for updating PO files. .nop.po-update: @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ echo "$${cdcmd}$(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ cd $(srcdir); \ if { case `$(MSGMERGE) --version | sed 1q | sed -e 's,^[^0-9]*,,'` in \ '' | 0.[0-9] | 0.[0-9].* | 0.1[0-7] | 0.1[0-7].*) \ $(MSGMERGE) $(MSGMERGE_OPTIONS) -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ *) \ $(MSGMERGE) $(MSGMERGE_OPTIONS) --lang=$$lang -o $$tmpdir/$$lang.new.po $$lang.po $(DOMAIN).pot;; \ esac; \ }; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ exit 1; \ fi; \ fi; \ else \ echo "msgmerge for $$lang.po failed!" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ fi $(DUMMYPOFILES): update-gmo: Makefile $(GMOFILES) @: # Recreate Makefile by invoking config.status. Explicitly invoke the shell, # because execution permission bits may not work on the current file system. # Use /bin/bash, which is the shell determined by autoconf for the use by its # scripts, not $(SHELL) which is hardwired to /bin/sh and may be deficient. Makefile: Makefile.in.in Makevars $(top_builddir)/config.status POTFILES.in LINGUAS cd $(top_builddir) \ && /bin/bash ./config.status $(subdir)/$@.in po-directories force: # Tell versions [3.59,3.63) of GNU make not to export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: # Special Makefile rules for English message catalogs with quotation marks. DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot .SUFFIXES: .insert-header .po-update-en en@quot.po-create: $(MAKE) en@quot.po-update en@boldquot.po-create: $(MAKE) en@boldquot.po-update en@quot.po-update: en@quot.po-update-en en@boldquot.po-update: en@boldquot.po-update-en .insert-header.po-update-en: @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ tmpdir=`pwd`; \ echo "$$lang:"; \ ll=`echo $$lang | sed -e 's/@.*//'`; \ LC_ALL=C; export LC_ALL; \ cd $(srcdir); \ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$lang -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) $(SED) -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ rm -f $$tmpdir/$$lang.new.po; \ else \ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ :; \ else \ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ exit 1; \ fi; \ fi; \ else \ echo "creation of $$lang.po failed!" 1>&2; \ rm -f $$tmpdir/$$lang.new.po; \ fi en@quot.insert-header: insert-header.sin sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header en@boldquot.insert-header: insert-header.sin sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header mostlyclean: mostlyclean-quot mostlyclean-quot: rm -f *.insert-header