/*
* internalComm.h
*
* Created on: 2019年5月7日
* Author: foluswen
*/
#ifndef _INTERNAL_COMM_H_
#define _INTERNAL_COMM_H_
//------------------------------------------------------------------------------
#include <stdint.h>
//------------------------------------------------------------------------------
//address
#define ADDR_AUX (0x01)
#define ADDR_FAN (0x02)
#if defined DD360 || defined DD360Audi || defined DD360ComBox
#define ADDR_RELAY (0x09)
#else
#define ADDR_RELAY (0x03)
#endif //defined DD360 || defined DD360Audi || defined DD360ComBox
#define ADDR_AC_PLUG (0x05)
#define ADDR_LED (0x06)
#define ADDR_BROADCAST (0xFF)
//command
#define CMD_QUERY_FW_VER (0x01)
#define CMD_QUERY_HW_VER (0x02)
#define CMD_QUERY_PRESENT_IN_VOL (0x03)
#define CMD_QUERY_PRESENT_OUT_VOL (0x04)
#define CMD_QUERY_FAN_SPEED (0x05)
#define CMD_QUERY_TEMPERATURE (0x06)
#define CMD_QUERY_AUX_POWER_VOL (0x07)
#define CMD_QUERY_RELAY_OUTPUT (0x08)
#define CMD_QUERY_GFD_ADC (0x09)
#define CMD_QUERY_GPIO_IN (0x0a)
#define CMD_QUERY_MODEL_NAME (0x24)
#define CMD_QUERY_AC_OUTPUT_CURRENT (0x27)
#define CMD_QUERY_AC_STATUS (0x28)
#define CMD_QUERY_AC_ALARM_CODE (0x29)
#define CMD_QUERY_AC_OUTPUT_ENERGY (0x2C)
#define CMD_CONFIG_FAN_SPEED (0x81)
#define CMD_CONFIG_MODEL_NAME (0x83)
#define CMD_CONFIG_RELAY_OUTPUT (0x85)
#define CMD_CONFIG_GPIO_OUTPUT (0x86)
#define CMD_CONFIG_RTC_DATA (0x87)
#define CMD_CONFIG_AC_LED_STATUS (0x88)
#define CMD_CONFIG_AC_DUTY (0x89)
#define CMD_CONFIG_LEGACY_REQ (0x8A)
#define CMD_CONFIG_GDF_VALUE (0x8B)
#define CMD_CONFIG_RESET_MCU (0x8C)
#define CMD_CONFIG_CSU_MODE (0x90)
#define CMD_CONFIG_LEN_COLOR (0x93)
#define CMD_UPDATE_START (0xe0)
#define CMD_UPDATE_ABORT (0xe1)
#define CMD_UPDATE_TRANSFER (0xe2)
#define CMD_UPDATE_FINISH (0xe3)
//------------------------------------------------------------------------------
typedef struct Verion {
char Version_FW[9];
char Version_HW[9];
} Ver;
typedef struct PRESENTINPUTVOLTAGE {
uint8_t inputType; // 0x00: Line to Line 0x01: Line to Neutral
double L1N_L12;
double L2N_L23;
double L3N_L31;
} PresentInputVoltage;
typedef struct PRESENTOUTPUTVOLTAGE {
double behindFuse_Voltage_C1;
double behindRelay_Voltage_C1;
double behindFuse_Voltage_C2;
double behindRelay_Voltage_C2;
} PresentOutputVoltage;
typedef struct FANSPEED {
uint16_t speed[8];
} FanSpeed;
typedef struct TEMPERATURE {
uint8_t temperature[8];
} Temperature;
typedef struct AUXPOWER {
uint8_t voltage[8];
} AuxPower;
typedef struct RELAY {
union {
uint8_t relay_status[8];
struct {
uint8_t AC_Contactor : 1; //bit 0
uint8_t CCS_Precharge : 1; //bit 1
uint8_t : 1; //bit 2 reserved
uint8_t : 1; //bit 3 reserved
uint8_t : 1; //bit 4 reserved
uint8_t : 1; //bit 5 reserved
uint8_t : 1; //bit 6 reserved
uint8_t : 1; //bit 7 reserved
uint8_t Gun1_N : 1; //bit 0
uint8_t Gun1_P : 1; //bit 1
uint8_t Gun1_Parallel_N : 1; //bit 2
uint8_t Gun1_Parallel_P : 1; //bit 3
uint8_t : 1; //bit 4 reserved
uint8_t : 1; //bit 5 reserved
uint8_t : 1; //bit 6 reserved
uint8_t : 1; //bit 7 reserved
uint8_t Gun2_N : 1; //bit 0
uint8_t Gun2_P : 1; //bit 1
uint8_t : 1; //bit 2 reserved
uint8_t : 1; //bit 3 reserved
uint8_t : 1; //bit 4 reserved
uint8_t : 1; //bit 5 reserved
uint8_t : 1; //bit 6 reserved
uint8_t : 1; //bit 7 reserved
} bits;
} relay_event;
} Relay;
typedef struct GFD {
unsigned short Resister_conn1;
unsigned short voltage_conn1;
uint8_t result_conn1;
uint8_t rb_step_1;
unsigned short Resister_conn2;
unsigned short voltage_conn2;
uint8_t result_conn2;
uint8_t rb_step_2;
} Gfd;
typedef struct Gfd_CONFIG {
uint8_t index;
uint8_t state;
} Gfd_config;
typedef struct GPIO_IN {
uint8_t AC_Connector; // bit 0
uint8_t AC_MainBreaker; // bit 1
uint8_t SPD; // bit 2
uint8_t Door_Open; // bit 3
uint8_t GFD[2]; // bit 4,5
uint8_t AC_Drop; // bit 6
uint8_t Emergency_IO; // bit 0
uint8_t Button_Emergency_Press; // bit 0
uint8_t Button_On_Press; // bit 1
uint8_t Button_Off_Press; // bit 2
uint8_t Key_1_Press; // bit 3
uint8_t Key_2_Press; // bit 4
uint8_t Key_3_Press; // bit 5
uint8_t Key_4_Press; // bit 6
} Gpio_in;
typedef struct GPIO_OUT {
uint8_t AC_Connector;
uint8_t Button_LED[2];
uint8_t System_LED[4];
} Gpio_out;
typedef struct RTC {
uint8_t RtcData[14];
} Rtc;
typedef struct LED_Color {
uint8_t Connect_1_Red;
uint8_t Connect_1_Green;
uint8_t Connect_1_Blue;
uint8_t Connect_2_Red;
uint8_t Connect_2_Green;
uint8_t Connect_2_Blue;
} Led_Color;
typedef struct AC_Status {
uint8_t CpStatus;
unsigned short CurLimit;
short PilotVol_P;
short PilotVol_N;
uint8_t LockStatus;
uint8_t RelayStatus;
uint8_t ShutterStatus;
uint8_t MeterStatus;
uint8_t PpStatus;
uint8_t MaxCurrent;
uint8_t RotateSwitchStatus;
} Ac_Status;
typedef struct AC_LED_Status {
uint8_t ActionMode;
unsigned long AcAlarmCode;
} Ac_Led_Status;
typedef struct AC_Alarm_Code {
uint32_t AcAlarmCode;
} Ac_Alarm_code;
typedef struct AC_Charging_Energy {
uint32_t Energy;
} Ac_Charging_energy;
typedef struct AC_Charging_Current {
unsigned short OuputCurrentL1;
unsigned short OuputCurrentL2;
unsigned short OuputCurrentL3;
} Ac_Charging_current;
int Query_FW_Ver(uint8_t fd, uint8_t targetAddr, Ver *Ret_Buf);
int Query_HW_Ver(uint8_t fd, uint8_t targetAddr, Ver *Ret_Buf);
int Query_Present_InputVoltage(uint8_t fd, uint8_t targetAddr, PresentInputVoltage *Ret_Buf);
int Query_Present_OutputVoltage(uint8_t fd, uint8_t targetAddr, PresentOutputVoltage *Ret_Buf);
int Query_Fan_Speed(uint8_t fd, uint8_t targetAddr, FanSpeed *Ret_Buf);
int Query_Temperature(uint8_t fd, uint8_t targetAddr, Temperature *Ret_Buf);
int Query_Aux_PowerVoltage(uint8_t fd, uint8_t targetAddr, AuxPower *Ret_Buf);
int Query_Relay_Output(uint8_t fd, uint8_t targetAddr, Relay *Ret_Buf);
int Query_Gfd_Adc(uint8_t fd, uint8_t targetAddr, Gfd *Ret_Buf);
int Query_Gpio_Input(uint8_t fd, uint8_t targetAddr, Gpio_in *Ret_Buf);
int Query_Model_Name(uint8_t fd, uint8_t targetAddr, uint8_t *modelname);
int Query_AC_Status(uint8_t fd, uint8_t targetAddr, Ac_Status *Ret_Buf);
int Query_AC_Alarm_Code(uint8_t fd, uint8_t targetAddr, Ac_Alarm_code *Ret_Buf);
int Query_Charging_Energy(uint8_t fd, uint8_t targetAddr, Ac_Charging_energy *Ret_Buf);
int Query_Charging_Current(uint8_t fd, uint8_t targetAddr, Ac_Charging_current *Ret_Buf);
int Config_Fan_Speed(uint8_t fd, uint8_t targetAddr, FanSpeed *Set_Buf);
int Config_Relay_Output(uint8_t fd, uint8_t targetAddr, Relay *Set_Buf);
int Config_Gpio_Output(uint8_t fd, uint8_t targetAddr, Gpio_out *Set_Buf);
int Config_Gfd_Value(uint8_t fd, uint8_t targetAddr, Gfd_config *Set_Buf);
int Config_Model_Name(uint8_t fd, uint8_t targetAddr, uint8_t *modelname);
int Config_Rtc_Data(uint8_t fd, uint8_t targetAddr, Rtc *Set_Buf);
int Config_LED_Status(uint8_t fd, uint8_t targetAddr, Ac_Led_Status *Ret_Buf);
int Config_Legacy_Req(uint8_t fd, uint8_t targetAddr, uint8_t _switch);
int Config_Ac_Duty(uint8_t fd, uint8_t targetAddr, uint8_t _value);
int Config_CSU_Mode(uint8_t fd, uint8_t targetAddr);
int Config_Reset_MCU(uint8_t fd, uint8_t targetAddr);
int Config_Led_Color(uint8_t fd, uint8_t targetAddr, Led_Color *Ret_Buf);
int Update_Start(uint8_t fd, uint8_t targetAddr, uint32_t crc32);
int Update_Abord(uint8_t fd, uint8_t targetAddr);
int Update_Transfer(uint8_t fd, uint8_t targetAddr, uint32_t startAddr, uint8_t *data, uint16_t length);
int Update_Finish(uint8_t fd, uint8_t targetAddr);
#endif /* _INTERNAL_COMM_H_ */