Merge branch 'master' of https://git.phihong.com.tw:30000/System_Integration/CSU3_AM335x

Makefile

@@ -22,7 +22,7 @@ Taurus-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[Taurus]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/Taurus/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/Taurus/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/Taurus/Images/
@@ -98,7 +98,7 @@ DD360-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[DD360]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/DD360/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/DD360/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/DD360/Images/
@@ -172,7 +172,7 @@ CCS-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[CCS]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_400 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/CCS/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/CCS/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/CCS/Images/
@@ -279,7 +279,7 @@ DM30-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[DM30]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/DM30/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/DM30/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/DM30/Images/
@@ -375,7 +375,7 @@ DW30-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[DW30]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/DW30/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/DW30/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/DW30/Images/
@@ -475,7 +475,7 @@ DS60-120-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[DS60-120]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/DS60-120/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/DS60-120/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/DS60-120/Images/
@@ -547,7 +547,7 @@ AW-Regular-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[AW-Regular]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F8G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F8G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/AW-Regular/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/AW-Regular/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/AW-Regular/Images/
@@ -619,7 +619,7 @@ BYTON-GB-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[BYTON-GB]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/BYTON-GB/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/BYTON-GB/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/BYTON-GB/Images/
@@ -1043,7 +1043,7 @@ Noodoe-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[Noodoe]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/Noodoe/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/Noodoe/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/Noodoe/Images/
@@ -1116,7 +1116,7 @@ PlugIt360-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[PlugIt360]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/PlugIt360/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/PlugIt360/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/PlugIt360/Images/
@@ -1189,7 +1189,7 @@ AW-CCS-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[AW-CCS]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F8G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F8G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65217
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/AW-CCS/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/AW-CCS/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/AW-CCS/Images/
@@ -1261,7 +1261,7 @@ DO360-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[DO360]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/DO360/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/DO360/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/DO360/Images/
@@ -1334,7 +1334,7 @@ ATE-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[ATE]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_400 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/ATE/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/ATE/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/ATE/Images/
@@ -1407,7 +1407,7 @@ Zanobe-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[Zanobe]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/Zanobe/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/Zanobe/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/Zanobe/Images/
@@ -1480,7 +1480,7 @@ e4you-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[e4you]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/e4you/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/e4you/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/e4you/Images/
@@ -1553,7 +1553,7 @@ DD360Audi-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[DD360Audi]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/DD360Audi/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/DD360Audi/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/DD360Audi/Images/
@@ -1625,7 +1625,7 @@ AW-ChargeLab-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[AW-ChargeLab]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/AW-ChargeLab/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/AW-ChargeLab/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/AW-ChargeLab/Images/
@@ -1728,7 +1728,7 @@ AX80-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[AX80]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F8G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F8G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65217
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/AX80/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/AX80/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/AX80/Images/
@@ -1803,7 +1803,7 @@ DD360UCar-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[DD360UCar]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/DD360UCar/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/DD360UCar/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/DD360UCar/Images/
@@ -1876,7 +1876,7 @@ DD360Tcci-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[DD360Tcci]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/DD360Tcci/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/DD360Tcci/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/DD360Tcci/Images/
@@ -1948,7 +1948,7 @@ NoodoeAX-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[NoodoeAX]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F8G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F8G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/NoodoeAX/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/NoodoeAX/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/NoodoeAX/Images/
@@ -2021,7 +2021,7 @@ NoodoeDS-uboot:
 	@echo    Building U-boot
 	@echo ===================================
 	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[NoodoeDS]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
+	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910
 	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/NoodoeDS/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/NoodoeDS/Images/
 	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/NoodoeDS/Images/
@@ -2078,76 +2078,3 @@ NoodoeDS-rootfs:
 
 NoodoeDS-all: NoodoeDS-uboot NoodoeDS-linux NoodoeDS-rootfs
 
-
-EVSE-Emulator-uboot-default: u-boot_clean u-boot
-	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/EVSE-Emulator/Images/
-	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/EVSE-Emulator/Images/
-
-EVSE-Emulator-uboot-menuconfig:
-	@echo ===================================
-	@echo    Building U-boot menuconfig
-	@echo ===================================
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) menuconfig
-
-EVSE-Emulator-uboot:
-	@echo ===================================
-	@echo    Building U-boot
-	@echo ===================================
-	@cp -f $(UBOOT_INSTALL_DIR)/arch/arm/dts/[EVSE-Emulator]am335x-evm.dts $(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(UBOOT_INSTALL_DIR) CROSS_COMPILE=$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303
-	@cp -f $(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/EVSE-Emulator/Images/
-	@cp -f $(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/EVSE-Emulator/Images/
-	@cp -f $(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/EVSE-Emulator/Images/
-
-EVSE-Emulator-linux-default: linux_clean linux
-	@cp -f $(LINUXKERNEL_INSTALL_DIR)/arch/arm/boot/zImage EVSE/Projects/EVSE-Emulator/Images/
-	@cp -f $(LINUXKERNEL_INSTALL_DIR)/arch/arm/boot/dts/am335x-evm.dtb EVSE/Projects/EVSE-Emulator/Images/
-
-EVSE-Emulator-linux:
-	@echo =====================================
-	@echo     Building the Linux Kernel DTBs
-	@echo =====================================
-	@rm -f $(LINUXKERNEL_INSTALL_DIR)/arch/arm/boot/dts/am335x-evm.dtb
-	@cp -f $(LINUXKERNEL_INSTALL_DIR)/arch/arm/boot/dts/[EVSE-Emulator]am335x-evm.dts $(LINUXKERNEL_INSTALL_DIR)/arch/arm/boot/dts/am335x-evm.dts
-	$(MAKE) -j $(MAKE_JOBS) -C $(LINUXKERNEL_INSTALL_DIR) ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) am335x-evm.dtb
-	@echo =================================
-	@echo     Building User Linux Kernel
-	@echo =================================
-	@rm -f $(LINUXKERNEL_INSTALL_DIR)/arch/arm/boot/zImage
-	$(MAKE) -j $(MAKE_JOBS) -C $(LINUXKERNEL_INSTALL_DIR) ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) zImage
-	$(MAKE) -j $(MAKE_JOBS) -C $(LINUXKERNEL_INSTALL_DIR) ARCH=arm CROSS_COMPILE=$(CROSS_COMPILE) modules
-	@cp -f $(LINUXKERNEL_INSTALL_DIR)/arch/arm/boot/zImage EVSE/Projects/EVSE-Emulator/Images/
-	@cp -f $(LINUXKERNEL_INSTALL_DIR)/arch/arm/boot/dts/am335x-evm.dtb EVSE/Projects/EVSE-Emulator/Images/
-	@cp -f $(LINUXKERNEL_INSTALL_DIR)/drivers/net/ethernet/qualcomm/qcaspi.ko EVSE/rootfs/lib/
-
-EVSE-Emulator-rootfs:
-	@echo =================================
-	@echo     Building User rootfs
-	@echo =================================
-#	@cd EVSE/GPL;make Project=Emulator all
-	@cd EVSE/Modularization;make TLS_EXPIRED=TLS_VALID_CERT_EXPIRED Project=Emulator all
-	@cd EVSE/Projects/EVSE-Emulator/Apps;make Project=Emulator all
-	@rm -f EVSE/Projects/EVSE-Emulator/Images/ramdisk.gz
-	@dd if=/dev/zero of=/dev/ram0 bs=1k count=131072
-	@mke2fs -vm0 /dev/ram0 131072
-	@tune2fs -c 0 /dev/ram0
-	@dd if=/dev/ram0 bs=1k count=131072 | gzip -v9 > EVSE/Projects/EVSE-Emulator/Images/ramdisk.gz
-	@mkdir -p EVSE/Projects/EVSE-Emulator/Images/mnt
-	@gunzip EVSE/Projects/EVSE-Emulator/Images/ramdisk.gz
-	@sync
-	@mount -o loop EVSE/Projects/EVSE-Emulator/Images/ramdisk EVSE/Projects/EVSE-Emulator/Images/mnt
-	@cp -rfv EVSE/rootfs/* EVSE/Projects/EVSE-Emulator/Images/mnt/
-	@chown www-data:www-data EVSE/Projects/EVSE-Emulator/Images/mnt/var/www -R
-	@chmod 777 EVSE/Projects/EVSE-Emulator/Images/mnt/var/log -R
-	@chmod 777 EVSE/Projects/EVSE-Emulator/Images/mnt/var/run -R
-	@cp -rfv EVSE/Projects/EVSE-Emulator/Images/root/* EVSE/Projects/EVSE-Emulator/Images/mnt/root
-	@sync
-	@sleep 3
-	@umount EVSE/Projects/EVSE-Emulator/Images/mnt
-	@sync
-	@gzip -v9 EVSE/Projects/EVSE-Emulator/Images/ramdisk
-	@rm -rfv EVSE/Projects/EVSE-Emulator/Images/root
-	@rm -rfv EVSE/Projects/EVSE-Emulator/Images/mnt
-
-EVSE-Emulator-all: EVSE-Emulator-uboot EVSE-Emulator-linux EVSE-Emulator-rootfs
-

board-support/linux-4.9.59+gitAUTOINC+a75d8e9305-ga75d8e9305/arch/arm/boot/dts/[AW-CCS]am335x-evm.dts

@@ -25,7 +25,7 @@
 
 	cpus {
 		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
+			cpu0-supply = <&dcdc2_reg>;
 		};
 	};
 
@@ -68,9 +68,9 @@
 			0x144 (PIN_INPUT | MUX_MODE7)    			/* RMII1_REF_CLK		=>	GPIO0_29 */	/*USB 0 OCP detection*/
 			0x1B0 (PIN_OUTPUT | MUX_MODE7)			/*XDMA_EVENT_INTR0	=>	GPIO0_19 */	/*AM_RFID_RST*/
 			0x1B4 (PIN_INPUT | MUX_MODE7)			/*XDMA_EVENT_INTR1	=>	GPIO0_20 */	/*AM_RFID_ICC*/
-			/** GPIO 1 */			
-			0x060 (PIN_OUTPUT | MUX_MODE7)                  /*GPIO1_24*/
-			0x06C (PIN_OUTPUT | MUX_MODE7)                  /* (V17) gpmc_a11.gpio1[27] */
+			/** GPIO 1 */		
+			0x060 (PIN_OUTPUT | MUX_MODE7)			/*GPIO1_24*/
+			0x06C (PIN_OUTPUT | MUX_MODE7)			/* (V17) gpmc_a11.gpio1[27] */
 
 			/** GPIO 2 */
 			0x088 (PIN_INPUT | MUX_MODE7)   		/* CCS=>GPMC_CSn3.GPIO2_0*/
@@ -338,8 +338,8 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	tps: tps@2d {
-		reg = <0x2d>;
+	tps: tps@24 {
+		reg = <0x24>;
 	};
 
 /*	rtc0: rtc@51 {
@@ -520,80 +520,69 @@
 	};
 };
 
-#include "tps65910.dtsi"
+/include/ "tps65217.dtsi"
 
 &tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
+	/*
+	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+	ti,pmic-shutdown-controller;
 
 	regulators {
-		vrtc_reg: regulator@0 {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
 			regulator-always-on;
 		};
 
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1378000>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
-		vdd2_reg: regulator@3 {
+		dcdc3_reg: regulator@2 {
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
+			regulator-min-microvolt = <925000>;
 			regulator-max-microvolt = <1150000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
 			regulator-always-on;
 		};
 
-		vaux2_reg: regulator@10 {
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
 			regulator-always-on;
 		};
 
-		vaux33_reg: regulator@11 {
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
 			regulator-always-on;
 		};
 
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
 			regulator-always-on;
 		};
 	};
@@ -644,7 +633,7 @@
 
 &mmc1 {
 	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
+	vmmc-supply = <&ldo4_reg>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_default>;

board-support/linux-4.9.59+gitAUTOINC+a75d8e9305-ga75d8e9305/arch/arm/boot/dts/[AWCCS]am335x-evm.dts

@@ -1,696 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- 
-#define PIN_OUTPUT		(PULL_DISABLE)
-#define PIN_OUTPUT_PULLUP	(PULL_UP)
-#define PIN_OUTPUT_PULLDOWN	0
-#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
-#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
-#define PIN_INPUT_PULLDOWN	(INPUT_EN)
-
-
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x EVM";
-	compatible = "ti,am335x-evm", "ti,am33xx";
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		/*reg = <0x80000000 0x10000000>;*/ /* 256 MB */
-		reg = <0x80000000 0x20000000>; /* 512 MB */ /* +++ vern,512MB DDR ,20181030 ---*/
-	};
-	/* +++ vern,ramdisk,20181030 +++*/
-	chosen {  
-		bootargs = "console=ttyS0,115200n8 root=/dev/ram0";  
-	};  
-	/* --- vern,ramdisk ,20181030 ---*/
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-};
-
-/******************** Pin Mux ********************/
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&InitialGPIO>; 
-	pinctrl-1 = <&clkout2_pin>;
-	
-	InitialGPIO: InitialGPIO {
-		pinctrl-single,pins = <
-		
-			/** Offset: 0x800 */
-			/** GPIO 0 */ 
-			0x144 (PIN_INPUT | MUX_MODE7)    			/* RMII1_REF_CLK		=>	GPIO0_29 */	/*USB 0 OCP detection*/
-			0x1B0 (PIN_OUTPUT | MUX_MODE7)			/*XDMA_EVENT_INTR0	=>	GPIO0_19 */	/*AM_RFID_RST*/
-			0x1B4 (PIN_INPUT | MUX_MODE7)			/*XDMA_EVENT_INTR1	=>	GPIO0_20 */	/*AM_RFID_ICC*/
-			/** GPIO 1 */		
-			0x060 (PIN_OUTPUT | MUX_MODE7)			/*GPIO1_24*/
-			0x06C (PIN_OUTPUT | MUX_MODE7)			/* (V17) gpmc_a11.gpio1[27] */
-
-			/** GPIO 2 */
-			0x088 (PIN_INPUT | MUX_MODE7)   		/* CCS=>GPMC_CSn3.GPIO2_0*/
-			0x08C (PIN_OUTPUT | MUX_MODE7)			/*GPMC_CLK	=>	GPIO2_1*/	/*Speaker*/
-			0x0A0 (PIN_OUTPUT | MUX_MODE7)			/*LCD_DATA0	=>	GPIO2_6*/	/*Panel LED control-BB_LEDR1*/
-			0x0A4 (PIN_OUTPUT | MUX_MODE7)			/*LCD_DATA1	=>	GPIO2_7*/	/*Panel LED control-BB_LEDG1*/
-			0x0A8 (PIN_OUTPUT | MUX_MODE7)			/*LCD_DATA2	=>	GPIO2_8*/	/*Panel LED control-BB_LEDB1*/
-			0x0AC (PIN_OUTPUT | MUX_MODE7)			/*LCD_DATA3	=>	GPIO2_9*/	/*Panel LED control-BB_LEDR2*/
-			0x0B0 (PIN_OUTPUT | MUX_MODE7)			/*LCD_DATA4	=>	GPIO2_10*/	/*Panel LED control-BB_LEDG2*/
-			0x0B4 (PIN_OUTPUT | MUX_MODE7)			/*LCD_DATA5	=>	GPIO2_11*/	/*Panel LED control-BB_LEDB2*/
-			0x0E8 (PIN_INPUT | MUX_MODE7)			/*LCD_PCLK	=>	GPIO2_24*/	/*communication board proximity*/
-			0x0E0 (PIN_OUTPUT | MUX_MODE7)			/*LCD_VSYNC	=>	GPIO2_22*/	/*Breath LED*/
-			0x0EC (PIN_OUTPUT | MUX_MODE7)			/* CCSEthernet-Reset=>LCD_AC_BIAS_EN.GPIO2_25*/
-			
-			/** GPIO 3 */
-			0x1A0 (PIN_OUTPUT | MUX_MODE7)                  /* MCASP0_AXR1  =>      GPIO3_18 */     /*control 4G reset pin*/
-			0x1A4 (PIN_OUTPUT | MUX_MODE7)			/* MCASP0_FSR.GPIO3_19 */
-			0x1A8 (PIN_OUTPUT | MUX_MODE7)			/* MCASP0_AXR1	=>	GPIO3_20 */	/*control MCU to output CP PWM*/
-		>;
-	};
-	
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-#if 1
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
-		>;
-	};
-#endif
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)		/* uart0_rxd	=>	uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd	=>	uart0_txd */
-		>;
-	};
-	
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) 		/* uart1_txd	=>	uart1_txd */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)			/* uart1_rxd	=>	uart1_rxd */
-		>;
-	};
-
-	uart2_pins: pinmux_uart2_pins {
-		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLUP | MUX_MODE1)			/* SPI0_SCLK	=>	UART2_RXD */
-			0x154 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)		/* SPI0_D0	=>	UART2_TXD */
-		>;
-	};
-	
-	uart3_pins: pinmux_uart3_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT_PULLUP | MUX_MODE1)		/* SPI0_CS1				=>	uart3_rxd */
-			0x164 (PIN_OUTPUT_PULLDOWN | MUX_MODE1)	/* ECAP0_IN_PWM0_OUT		=>	uart3_txd */
-		>;
-	};
-#if 0
-	uart5_pins: pinmux_uart5_pins {
-		pinctrl-single,pins = <
-			0x0C0 (PIN_INPUT_PULLUP | MUX_MODE4)		/* LCD_DATA8	=>	UART5_RXD*/
-			0x0C4 (PIN_OUTPUT_PULLDOWN | MUX_MODE4)	/* LCD_DATA9	=>	UART5_TXD*/
-		>;
-	};
-#endif	
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	nandflash_pins_default: nandflash_pins_default {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_31 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	nandflash_pins_sleep: nandflash_pins_sleep {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x4 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x8 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0xc (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x10 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x18 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x1c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x7c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x90 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x94 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x98 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x9c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <					
-		
-			/* Slave 1 */
-			//0x108 (PIN_INPUT_PULLDOWN | MUX_MODE0)		/* MII1_COL.gmii1_col */
-			//0x10C(PIN_INPUT_PULLDOWN | MUX_MODE0)		/* MII1_CRS.MII1_CRS */
-			0x110 (PIN_INPUT_PULLUP | MUX_MODE0)		/* MII1_RX_ER.gmii1_rxerr */
-			0x118 (PIN_INPUT_PULLUP | MUX_MODE0)		/* mii1_rxdv.mii1_rxdv */
-			0x12c (PIN_INPUT_PULLUP | MUX_MODE0)		/* mii1_txclk.mii1_txclk */
-			0x130 (PIN_INPUT_PULLUP | MUX_MODE0)		/* mii1_rxclk.mii1_rxclk */
-			0x134 (PIN_INPUT_PULLUP | MUX_MODE0)		/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLUP | MUX_MODE0)		/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLUP | MUX_MODE0)		/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLUP | MUX_MODE0)		/* mii1_rxd0.rgmii1_rd0 */	
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* mii1_txen.mii1_txen */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* mii1_txd0.rgmii1_td0 */      
-
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)		
-			
-		>;
-	};
-
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	mmc1_pins_default: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0)    	/* mmc0_dat3.mmc0_dat3 */
-			0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0)    	/* mmc0_dat2.mmc0_dat2 */
-			0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0)    	/* mmc0_dat1.mmc0_dat1 */
-			0x0FC (PIN_INPUT_PULLUP | MUX_MODE0)    	/* mmc0_dat0.mmc0_dat0 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)    	/* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)    	/* mmc0_cmd.mmc0_cmd */
-			0x1AC (PIN_INPUT_PULLUP | MUX_MODE7)	/* MCASP0_AHCLKX.GPIO3_21 */
-		>;
-	};
-
-	dcan0_pins_default: dcan0_pins_default {
-		pinctrl-single,pins = <		
-			0x178 (PIN_OUTPUT_PULLUP | MUX_MODE2)			/* uart1_ctsn	=>	d_can0_tx */
-			0x17C (PIN_INPUT_PULLDOWN | MUX_MODE2)		/* uart1_rtsn	=>	d_can0_rx */
-		>;
-	};
-#if 0	
-	dcan1_pins_default: dcan1_pins_default {
-		pinctrl-single,pins = <
-			0x168 (PIN_OUTPUT_PULLUP | MUX_MODE2)		/* UART0_CTSn		=>	d_can1_tx */
-			0x16C (PIN_INPUT_PULLDOWN | MUX_MODE2)	/* UART0_RTSn		=>	d_can1_rx */
-		>;
-	};
-
-	ehrpwm1_pins: ehrpwm1_pins {
-		pinctrl-single,pins = <			
-			0x0C8 (PIN_OUTPUT | MUX_MODE2) /* LCD_DATA10.eHRPWM1A */
-		>;
-	};
-	
-	ehrpwm2_pins: ehrpwm2_pins {
-		pinctrl-single,pins =< 
-			0x0A4 (PIN_OUTPUT | MUX_MODE3)	/* LCD_DATA1.eHRPWM2B */
-		>;                
-    	};	 
-#endif  
-	spi1_pins: spi1_pins {
-                pinctrl-single,pins = <
-                        AM33XX_IOPAD(0x990, PIN_INPUT_PULLUP | MUX_MODE3) /* MCASP0_ACLKX.AM_SPI1_SCLK */
-                        AM33XX_IOPAD(0x994, PIN_INPUT_PULLUP | MUX_MODE3) /* MCASP0_FSX.AM_SPI1_D0 */
-                        AM33XX_IOPAD(0x998, PIN_OUTPUT_PULLUP | MUX_MODE3) /* MCASP0_AXR0.AM_SPI1_D1 */
-                        AM33XX_IOPAD(0x99C, PIN_OUTPUT_PULLUP | MUX_MODE3) /* MCASP0_AHCLKR.AM_SPI1_CS0 */
-                >;
-        };
-};
-
-
-/******************** Peripheral Init ********************/			
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-
-	status = "okay";
-};
-
-&uart2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart2_pins>;
-
-	status = "okay";
-};
-
-&uart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart3_pins>;
-
-	status = "okay";
-};
-#if 0
-&uart5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart5_pins>;
-
-	status = "okay";
-};
-#endif
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-
-/*	rtc0: rtc@51 {
-		compatible = "nxp,pcf85063";
-		reg = <0x51>;
-	};*/
-};
-#if 1
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	rtc0: rtc@51 {
-                compatible = "nxp,pcf85063";
-                reg = <0x51>;
-        };
-
-};
-#endif
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-#if 0
-&epwmss1 {
-	status = "okay";      
-
-	ehrpwm1: pwm@48302200 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ehrpwm1_pins>;
-	};
-};
-
-&epwmss2 {
-	status = "okay";   
-
-	ehrpwm2: pwm@48304200 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ehrpwm2_pins>;
-	};	   
-};
-#endif
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&nandflash_pins_default>;
-	pinctrl-1 = <&nandflash_pins_sleep>;
-	/*ranges = <0 0 0x08000000 0x10000000>;*/	/* CS0: NAND */
-	ranges = <0 0 0x08000000 0x40000000>;	/*+++ vern,NAND,20181030 ---*/
-	nand@0,0 {
-		compatible = "ti,omap2-nand";
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		interrupt-parent = <&gpmc>;
-		interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
-                    <1 IRQ_TYPE_NONE>;	/* termcount */
-		rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
-		ti,nand-ecc-opt = "bch16";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "SPL";
-			reg = <0x00000000 0x00080000>;
-		};
-		partition@1 {
-			label = "Primary u-boot";
-			reg = <0x00080000 0x00100000>;
-		};
-		partition@2 {
-			label = "u-boot-env";
-			reg = <0x00180000 0x00080000>;
-		};
-		partition@3 {
-			label = "Secondary u-boot";
-			reg = <0x00200000 0x00100000>;
-		};
-		partition@4 {
-			label = "Primary dtb";
-			reg = <0x00300000 0x00080000>;
-		};
-		partition@5 {
-			label = "Secondary dtb";
-			reg = <0x00380000 0x00080000>;
-		};
-		partition@6 {
-			label = "Primary kernel";
-			reg = <0x00400000 0x00A00000>;
-		};
-		partition@7 {
-			label = "Secondary kernel";
-			reg = <0x00E00000 0x00A00000>;
-		};
-		partition@8 {
-			label = "Primary rootfs";
-			reg = <0x03000000 0x03000000>;
-		};
-		partition@9 {
-			label = "Secondary rootfs";
-			reg = <0x06000000 0x03000000>;
-		};
-		partition@10 {
-			label = "Primary user configuration";
-			reg = <0x09000000 0x00600000>;
-		};
-		partition@11 {
-			label = "Secondary user configuration";
-			reg = <0x09600000 0x00600000>;
-		};
-		partition@12 {
-			label = "Factory default configuration";
-			reg = <0x09C00000 0x00600000>;
-		};
-		partition@13 {
-			label = "Storage";
-			reg = <0x0A200000 0x35E00000>;
-		};
-	};
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	/*
-	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
-	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
-	 * mode and risk hardware damage if this mode is entered.
-	 *
-	 * For details, see linux-omap mailing list May 2015 thread
-	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
-	 * In particular, messages:
-	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
-	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
-	 *
-	 * You can override this later with
-	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
-	 * if you want to use RTC-only mode and made sure you are not affected
-	 * by the hardware problems. (Tip: double-check by performing a current
-	 * measurement after shutdown: it should be less than 1 mA.)
-	 */
-	ti,pmic-shutdown-controller;
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1351500>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3a";
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-	//reset-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <1>;
- 	phy-mode = "mii";
-
-};
-
-#if 0
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <2>;
- 	phy-mode = "mii";
-
-};
-#endif
-
-&tscadc {
-	status = "okay";
-	/*tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-	};*/
-
-	adc {
-		ti,adc-channels = <0 1 2 3 4 5 6 7>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&ldo4_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_default>;
-	cd-gpios = <&gpio3 21 GPIO_ACTIVE_LOW>;
-};
-
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-					    2 13>;
-};
-
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&wkup_m3 {
-	ti,scale-data-fw = "am335x-evm-scale-data.bin";
-};
-
-&dcan0 {
-	status = "okay";	
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan0_pins_default>;
-};
-#if 0
-&dcan1 {
-	status = "okay";	
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins_default>;
-};
-#endif
-
-/*
-The QCA7000 acts as a SPI slave and uses Mode 3: CPOL=1, CPHA=1.
-SPI data width is 8 bit. The SPI CLK period should not be less than 83.3 ns
-The SPI should be used in burst mode, meaning that the chip select is held low during a complete SPI message.
- Note: The SPI lines between Host CPU and QCA7000 should be kept as short as possible.
-
-*/
-&spi1 {
-        status = "okay";
-        pinctrl-names = "default";
-        pinctrl-0 = <&spi1_pins>;
-        qca7000@0 {
-                compatible = "qca,qca7000";
-                reg = <0>;
-                interrupt-parent = <&gpio2>; /* GPIO2_0 */
-                interrupts = <0 1>;                     /* GPIO2_0 */
-                spi-cpha;                                        /* SPI mode: CPHA=1 */
-                spi-cpol;                                        /* SPI mode: CPOL=1 */
-                spi-max-frequency = <10000000>;  /* freq: 10MHz */
-                qca,legacy-mode = <0>;            /* Burst mode */
-        };
-};
-

board-support/linux-4.9.59+gitAUTOINC+a75d8e9305-ga75d8e9305/arch/arm/boot/dts/[AX80]am335x-evm.dts

@@ -25,7 +25,7 @@
 
 	cpus {
 		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
+			cpu0-supply = <&dcdc2_reg>;
 		};
 	};
 
@@ -338,8 +338,8 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	tps: tps@2d {
-		reg = <0x2d>;
+	tps: tps@24 {
+		reg = <0x24>;
 	};
 
 /*	rtc0: rtc@51 {
@@ -520,80 +520,69 @@
 	};
 };
 
-#include "tps65910.dtsi"
+/include/ "tps65217.dtsi"
 
 &tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
+	/*
+	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+	ti,pmic-shutdown-controller;
 
 	regulators {
-		vrtc_reg: regulator@0 {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
 			regulator-always-on;
 		};
 
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
-			/* VDD_MPU voltage limits 0.95V - 1.325V with +/-4% tolerance */
+		dcdc2_reg: regulator@1 {
+			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1378000>;
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1351500>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
-		vdd2_reg: regulator@3 {
+		dcdc3_reg: regulator@2 {
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
+			regulator-min-microvolt = <925000>;
 			regulator-max-microvolt = <1150000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
 			regulator-always-on;
 		};
 
-		vaux2_reg: regulator@10 {
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
 			regulator-always-on;
 		};
 
-		vaux33_reg: regulator@11 {
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
 			regulator-always-on;
 		};
 
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
 			regulator-always-on;
 		};
 	};
@@ -644,7 +633,7 @@
 
 &mmc1 {
 	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
+	vmmc-supply = <&ldo4_reg>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_default>;

board-support/u-boot-2017.01+gitAUTOINC+340fb36f04-g340fb36f04/arch/arm/dts/[AW-CCS]am335x-evm.dts

@@ -21,7 +21,7 @@
 
 	cpus {
 		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
+			cpu0-supply = <&dcdc2_reg>;
 		};
 	};
 
@@ -166,7 +166,7 @@
 			0x60 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a8.gpio1_24 */
 			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
 			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-			0x6c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a11.gpio1_27 */
+			0x6c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
 		>;
 	};
 
@@ -404,8 +404,8 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	tps: tps@2d {
-		reg = <0x2d>;
+	tps: tps@24 {
+		reg = <0x24>;
 	};
 };
 
@@ -489,9 +489,9 @@
 		status = "okay";
 
 		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
+		AVDD-supply = <&ldo2_reg>;
+		IOVDD-supply = <&ldo2_reg>;
+		DRVDD-supply = <&ldo2_reg>;
 		DVDD-supply = <&vbat>;
 	};
 };
@@ -613,96 +613,69 @@
 	};
 };
 
-#include "tps65910.dtsi"
-#if 0
-&mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&am335x_evm_audio_pins>;
-
-		status = "okay";
+/include/ "tps65217.dtsi"
 
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
-};
-#endif
 &tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
+	/*
+	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+	ti,pmic-shutdown-controller;
 
 	regulators {
-		vrtc_reg: regulator@0 {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
 			regulator-always-on;
 		};
 
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
+		dcdc2_reg: regulator@1 {
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1325000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
-		vdd2_reg: regulator@3 {
+		dcdc3_reg: regulator@2 {
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
+			regulator-min-microvolt = <925000>;
 			regulator-max-microvolt = <1150000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
 			regulator-always-on;
 		};
 
-		vaux2_reg: regulator@10 {
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
 			regulator-always-on;
 		};
 
-		vaux33_reg: regulator@11 {
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
 			regulator-always-on;
 		};
 
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
 			regulator-always-on;
 		};
 	};
@@ -749,7 +722,7 @@
 
 &mmc1 {
 	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
+	vmmc-supply = <&ldo4_reg>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_default>;

board-support/u-boot-2017.01+gitAUTOINC+340fb36f04-g340fb36f04/arch/arm/dts/[AWCCS]am335x-evm.dts

@@ -1,776 +0,0 @@
-/*
- * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-/dts-v1/;
-
-#include "am33xx.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
-	model = "TI AM335x EVM";
-	compatible = "ti,am335x-evm", "ti,am33xx";
-
-	chosen {
-		stdout-path = &uart0;
-		tick-timer = &timer2;
-	};
-
-	cpus {
-		cpu@0 {
-			cpu0-supply = <&dcdc2_reg>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		//reg = <0x80000000 0x10000000>; /* 256 MB */
-		reg = <0x80000000 0x20000000>; /* 512 MB */ /* +++ vern,512MB DDR ,20181030 ---*/
-	};
-
-	vbat: fixedregulator@0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vbat";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-boot-on;
-	};
-
-	lis3_reg: fixedregulator@1 {
-		compatible = "regulator-fixed";
-		regulator-name = "lis3_reg";
-		regulator-boot-on;
-	};
-
-	wlan_en_reg: fixedregulator@2 {
-		compatible = "regulator-fixed";
-		regulator-name = "wlan-en-regulator";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		/* WLAN_EN GPIO for this board - Bank1, pin16 */
-		gpio = <&gpio1 16 0>;
-
-		/* WLAN card specific delay */
-		startup-delay-us = <70000>;
-		enable-active-high;
-	};
-
-	matrix_keypad: matrix_keypad@0 {
-		compatible = "gpio-matrix-keypad";
-		debounce-delay-ms = <5>;
-		col-scan-delay-us = <2>;
-
-		row-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH		/* Bank1, pin25 */
-			     &gpio1 26 GPIO_ACTIVE_HIGH		/* Bank1, pin26 */
-			     &gpio1 27 GPIO_ACTIVE_HIGH>;	/* Bank1, pin27 */
-
-		col-gpios = <&gpio1 21 GPIO_ACTIVE_HIGH		/* Bank1, pin21 */
-			     &gpio1 22 GPIO_ACTIVE_HIGH>;	/* Bank1, pin22 */
-
-		linux,keymap = <0x0000008b	/* MENU */
-				0x0100009e	/* BACK */
-				0x02000069	/* LEFT */
-				0x0001006a	/* RIGHT */
-				0x0101001c	/* ENTER */
-				0x0201006c>;	/* DOWN */
-	};
-
-	gpio_keys: volume_keys@0 {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		autorepeat;
-
-		switch@9 {
-			label = "volume-up";
-			linux,code = <115>;
-			gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
-		};
-
-		switch@10 {
-			label = "volume-down";
-			linux,code = <114>;
-			gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
-			gpio-key,wakeup;
-		};
-	};
-
-	backlight {
-		compatible = "pwm-backlight";
-		pwms = <&ecap0 0 50000 0>;
-		brightness-levels = <0 51 53 56 62 75 101 152 255>;
-		default-brightness-level = <8>;
-	};
-
-	panel {
-		compatible = "ti,tilcdc,panel";
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&lcd_pins_s0>;
-		panel-info {
-			ac-bias           = <255>;
-			ac-bias-intrpt    = <0>;
-			dma-burst-sz      = <16>;
-			bpp               = <32>;
-			fdd               = <0x80>;
-			sync-edge         = <0>;
-			sync-ctrl         = <1>;
-			raster-order      = <0>;
-			fifo-th           = <0>;
-		};
-
-		display-timings {
-			800x480p62 {
-				clock-frequency = <30000000>;
-				hactive = <800>;
-				vactive = <480>;
-				hfront-porch = <39>;
-				hback-porch = <39>;
-				hsync-len = <47>;
-				vback-porch = <29>;
-				vfront-porch = <13>;
-				vsync-len = <2>;
-				hsync-active = <1>;
-				vsync-active = <1>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "ti,da830-evm-audio";
-		ti,model = "AM335x-EVM";
-		ti,audio-codec = <&tlv320aic3106>;
-		ti,mcasp-controller = <&mcasp1>;
-		ti,codec-clock-rate = <12000000>;
-		ti,audio-routing =
-			"Headphone Jack",       "HPLOUT",
-			"Headphone Jack",       "HPROUT",
-			"LINE1L",               "Line In",
-			"LINE1R",               "Line In";
-	};
-};
-
-&am33xx_pinmux {
-	pinctrl-names = "default";
-	pinctrl-0 = <&matrix_keypad_s0 &volume_keys_s0 &clkout2_pin>;
-
-	matrix_keypad_s0: matrix_keypad_s0 {
-		pinctrl-single,pins = <
-			0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a5.gpio1_21 */
-			0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a6.gpio1_22 */
-			0x60 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)  /* gpmc_a8.gpio1_24 */
-			0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a9.gpio1_25 */
-			0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a10.gpio1_26 */
-			0x6c (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a11.gpio1_27 */
-		>;
-	};
-
-	volume_keys_s0: volume_keys_s0 {
-		pinctrl-single,pins = <
-			0x150 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_sclk.gpio0_2 */
-			0x154 (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* spi0_d0.gpio0_3 */
-		>;
-	};
-
-	i2c0_pins: pinmux_i2c0_pins {
-		pinctrl-single,pins = <
-			0x188 (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_sda.i2c0_sda */
-			0x18c (PIN_INPUT_PULLUP | MUX_MODE0)	/* i2c0_scl.i2c0_scl */
-		>;
-	};
-
-	i2c1_pins: pinmux_i2c1_pins {
-		pinctrl-single,pins = <
-			0x158 (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_d1.i2c1_sda */
-			0x15c (PIN_INPUT_PULLUP | MUX_MODE2)	/* spi0_cs0.i2c1_scl */
-		>;
-	};
-
-	uart0_pins: pinmux_uart0_pins {
-		pinctrl-single,pins = <
-			0x170 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart0_rxd.uart0_rxd */
-			0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart0_txd.uart0_txd */
-		>;
-	};
-
-	uart1_pins: pinmux_uart1_pins {
-		pinctrl-single,pins = <
-			0x178 (PIN_INPUT | MUX_MODE0)		/* uart1_ctsn.uart1_ctsn */
-			0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_rtsn.uart1_rtsn */
-			0x180 (PIN_INPUT_PULLUP | MUX_MODE0)	/* uart1_rxd.uart1_rxd */
-			0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)	/* uart1_txd.uart1_txd */
-		>;
-	};
-
-	clkout2_pin: pinmux_clkout2_pin {
-		pinctrl-single,pins = <
-			0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)	/* xdma_event_intr1.clkout2 */
-		>;
-	};
-
-	nandflash_pins_s0: nandflash_pins_s0 {
-		pinctrl-single,pins = <
-			0x0 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad0.gpmc_ad0 */
-			0x4 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad1.gpmc_ad1 */
-			0x8 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad2.gpmc_ad2 */
-			0xc (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad3.gpmc_ad3 */
-			0x10 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad4.gpmc_ad4 */
-			0x14 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad5.gpmc_ad5 */
-			0x18 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad6.gpmc_ad6 */
-			0x1c (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_ad7.gpmc_ad7 */
-			0x70 (PIN_INPUT_PULLUP | MUX_MODE0)	/* gpmc_wait0.gpmc_wait0 */
-			0x74 (PIN_INPUT_PULLUP | MUX_MODE7)	/* gpmc_wpn.gpio0_30 */
-			0x7c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_csn0.gpmc_csn0  */
-			0x90 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_advn_ale.gpmc_advn_ale */
-			0x94 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_oen_ren.gpmc_oen_ren */
-			0x98 (PIN_OUTPUT | MUX_MODE0)		/* gpmc_wen.gpmc_wen */
-			0x9c (PIN_OUTPUT | MUX_MODE0)		/* gpmc_be0n_cle.gpmc_be0n_cle */
-		>;
-	};
-
-	ecap0_pins: backlight_pins {
-		pinctrl-single,pins = <
-			0x164 0x0	/* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out MODE0 */
-		>;
-	};
-
-	cpsw_default: cpsw_default {
-		pinctrl-single,pins = <
-			/* Slave 1 */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE0)		/* MII1_RX_ER.gmii1_rxerr */
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE0)		/* mii1_rxdv.mii1_rxdv */
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE0)		/* mii1_txclk.mii1_txclk */
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE0)		/* mii1_rxclk.mii1_rxclk */
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE0)		/* mii1_rxd3.rgmii1_rd3 */
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE0)		/* mii1_rxd2.rgmii1_rd2 */
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE0)		/* mii1_rxd1.rgmii1_rd1 */
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE0)		/* mii1_rxd0.rgmii1_rd0 */	
-			0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* mii1_txen.mii1_txen */
-			0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* mii1_txd3.rgmii1_td3 */
-			0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* mii1_txd2.rgmii1_td2 */
-			0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* mii1_txd1.rgmii1_td1 */
-			0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE0)		/* mii1_txd0.rgmii1_td0 */      
-		>;
-	};
-
-	cpsw_sleep: cpsw_sleep {
-		pinctrl-single,pins = <
-			/* Slave 1 reset value */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7)		/* MII1_RX_ER.gmii1_rxerr */
-			//0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7)		/* MII1_COL.gmii1_col */
-			//0x10C (PIN_INPUT_PULLDOWN | MUX_MODE7)	/* MII1_CRS.gmii1_crs */
-			0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	davinci_mdio_default: davinci_mdio_default {
-		pinctrl-single,pins = <
-			/* MDIO */
-			0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0)	/* mdio_data.mdio_data */
-			0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0)			/* mdio_clk.mdio_clk */
-		>;
-	};
-
-	davinci_mdio_sleep: davinci_mdio_sleep {
-		pinctrl-single,pins = <
-			/* MDIO reset value */
-			0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
-			0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
-		>;
-	};
-
-	#if 0
-	mmc1_pins: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
-		>;
-	};
-	#endif
-	mmc1_pins_default: pinmux_mmc1_pins {
-		pinctrl-single,pins = <
-			0x0F0 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat3.mmc0_dat3 */
-			0x0F4 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat2.mmc0_dat2 */
-			0x0F8 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat1.mmc0_dat1 */
-			0x0FC (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_dat0.mmc0_dat0 */
-			0x100 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_clk.mmc0_clk */
-			0x104 (PIN_INPUT_PULLUP | MUX_MODE0)    /* mmc0_cmd.mmc0_cmd */
-			/*0x0A8 (PIN_INPUT | MUX_MODE7)*/	        /* LCD_DATA2.GPIO2_8 */
-			0x08C (PIN_INPUT | MUX_MODE7)	        /* GPMC_CLK.GPIO2_1 */
-		>;
-	};
-	mmc3_pins: pinmux_mmc3_pins {
-		pinctrl-single,pins = <
-			0x44 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a1.mmc2_dat0, INPUT_PULLUP | MODE3 */
-			0x48 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a2.mmc2_dat1, INPUT_PULLUP | MODE3 */
-			0x4C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_a3.mmc2_dat2, INPUT_PULLUP | MODE3 */
-			0x78 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_ben1.mmc2_dat3, INPUT_PULLUP | MODE3 */
-			0x88 (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_csn3.mmc2_cmd, INPUT_PULLUP | MODE3 */
-			0x8C (PIN_INPUT_PULLUP | MUX_MODE3)	/* gpmc_clk.mmc2_clk, INPUT_PULLUP | MODE3 */
-		>;
-	};
-
-	wlan_pins: pinmux_wlan_pins {
-		pinctrl-single,pins = <
-			0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_a0.gpio1_16 */
-			0x19C (PIN_INPUT | MUX_MODE7)		/* mcasp0_ahclkr.gpio3_17 */
-			0x1AC (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* mcasp0_ahclkx.gpio3_21 */
-		>;
-	};
-
-	lcd_pins_s0: lcd_pins_s0 {
-		pinctrl-single,pins = <
-			0x20 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad8.lcd_data23 */
-			0x24 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad9.lcd_data22 */
-			0x28 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad10.lcd_data21 */
-			0x2c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad11.lcd_data20 */
-			0x30 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad12.lcd_data19 */
-			0x34 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad13.lcd_data18 */
-			0x38 (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad14.lcd_data17 */
-			0x3c (PIN_OUTPUT | MUX_MODE1)		/* gpmc_ad15.lcd_data16 */
-			0xa0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data0.lcd_data0 */
-			0xa4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data1.lcd_data1 */
-			0xa8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data2.lcd_data2 */
-			0xac (PIN_OUTPUT | MUX_MODE0)		/* lcd_data3.lcd_data3 */
-			0xb0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data4.lcd_data4 */
-			0xb4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data5.lcd_data5 */
-			0xb8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data6.lcd_data6 */
-			0xbc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data7.lcd_data7 */
-			0xc0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data8.lcd_data8 */
-			0xc4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data9.lcd_data9 */
-			0xc8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data10.lcd_data10 */
-			0xcc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data11.lcd_data11 */
-			0xd0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data12.lcd_data12 */
-			0xd4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data13.lcd_data13 */
-			0xd8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_data14.lcd_data14 */
-			0xdc (PIN_OUTPUT | MUX_MODE0)		/* lcd_data15.lcd_data15 */
-			0xe0 (PIN_OUTPUT | MUX_MODE0)		/* lcd_vsync.lcd_vsync */
-			0xe4 (PIN_OUTPUT | MUX_MODE0)		/* lcd_hsync.lcd_hsync */
-			0xe8 (PIN_OUTPUT | MUX_MODE0)		/* lcd_pclk.lcd_pclk */
-			0xec (PIN_OUTPUT | MUX_MODE0)		/* lcd_ac_bias_en.lcd_ac_bias_en */
-		>;
-	};
-#if 0
-	am335x_evm_audio_pins: am335x_evm_audio_pins {
-		pinctrl-single,pins = <
-			0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
-			0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
-			0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
-			0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
-		>;
-	};
-#endif
-	dcan1_pins_default: dcan1_pins_default {
-		pinctrl-single,pins = <
-			0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
-			0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
-		>;
-	};
-};
-
-&uart0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart0_pins>;
-
-	status = "okay";
-};
-
-&uart1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart1_pins>;
-
-	status = "okay";
-};
-
-&i2c0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c0_pins>;
-
-	status = "okay";
-	clock-frequency = <400000>;
-
-	tps: tps@24 {
-		reg = <0x24>;
-	};
-};
-
-&usb {
-	status = "okay";
-};
-
-&usb_ctrl_mod {
-	status = "okay";
-};
-
-&usb0_phy {
-	status = "okay";
-};
-
-&usb1_phy {
-	status = "okay";
-};
-
-&usb0 {
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-	dr_mode = "host";
-};
-
-&cppi41dma  {
-	status = "okay";
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins>;
-
-	status = "okay";
-	clock-frequency = <100000>;
-
-	lis331dlh: lis331dlh@18 {
-		compatible = "st,lis331dlh", "st,lis3lv02d";
-		reg = <0x18>;
-		Vdd-supply = <&lis3_reg>;
-		Vdd_IO-supply = <&lis3_reg>;
-
-		st,click-single-x;
-		st,click-single-y;
-		st,click-single-z;
-		st,click-thresh-x = <10>;
-		st,click-thresh-y = <10>;
-		st,click-thresh-z = <10>;
-		st,irq1-click;
-		st,irq2-click;
-		st,wakeup-x-lo;
-		st,wakeup-x-hi;
-		st,wakeup-y-lo;
-		st,wakeup-y-hi;
-		st,wakeup-z-lo;
-		st,wakeup-z-hi;
-		st,min-limit-x = <120>;
-		st,min-limit-y = <120>;
-		st,min-limit-z = <140>;
-		st,max-limit-x = <550>;
-		st,max-limit-y = <550>;
-		st,max-limit-z = <750>;
-	};
-
-	tsl2550: tsl2550@39 {
-		compatible = "taos,tsl2550";
-		reg = <0x39>;
-	};
-
-	tmp275: tmp275@48 {
-		compatible = "ti,tmp275";
-		reg = <0x48>;
-	};
-
-	tlv320aic3106: tlv320aic3106@1b {
-		compatible = "ti,tlv320aic3106";
-		reg = <0x1b>;
-		status = "okay";
-
-		/* Regulators */
-		AVDD-supply = <&ldo2_reg>;
-		IOVDD-supply = <&ldo2_reg>;
-		DRVDD-supply = <&ldo2_reg>;
-		DVDD-supply = <&vbat>;
-	};
-};
-
-&lcdc {
-	status = "okay";
-};
-
-&elm {
-	status = "okay";
-};
-
-&epwmss0 {
-	status = "okay";
-
-	ecap0: ecap@48300100 {
-		status = "okay";
-		pinctrl-names = "default";
-		pinctrl-0 = <&ecap0_pins>;
-	};
-};
-
-&gpmc {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&nandflash_pins_s0>;
-	/*ranges = <0 0 0x08000000 0x1000000>;*/	/* CS0: 16MB for NAND */
-	ranges = <0 0 0x08000000 0x40000000>;	/*+++ vern,NAND,20181030 ---*/
-	nand@0,0 {
-		reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
-		ti,nand-ecc-opt = "bch16";
-		ti,elm-id = <&elm>;
-		nand-bus-width = <8>;
-		gpmc,device-width = <1>;
-		gpmc,sync-clk-ps = <0>;
-		gpmc,cs-on-ns = <0>;
-		gpmc,cs-rd-off-ns = <44>;
-		gpmc,cs-wr-off-ns = <44>;
-		gpmc,adv-on-ns = <6>;
-		gpmc,adv-rd-off-ns = <34>;
-		gpmc,adv-wr-off-ns = <44>;
-		gpmc,we-on-ns = <0>;
-		gpmc,we-off-ns = <40>;
-		gpmc,oe-on-ns = <0>;
-		gpmc,oe-off-ns = <54>;
-		gpmc,access-ns = <64>;
-		gpmc,rd-cycle-ns = <82>;
-		gpmc,wr-cycle-ns = <82>;
-		gpmc,wait-on-read = "true";
-		gpmc,wait-on-write = "true";
-		gpmc,bus-turnaround-ns = <0>;
-		gpmc,cycle2cycle-delay-ns = <0>;
-		gpmc,clk-activation-ns = <0>;
-		gpmc,wait-monitoring-ns = <0>;
-		gpmc,wr-access-ns = <40>;
-		gpmc,wr-data-mux-bus-ns = <0>;
-		/* MTD partition table */
-		/* All SPL-* partitions are sized to minimal length
-		 * which can be independently programmable. For
-		 * NAND flash this is equal to size of erase-block */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		partition@0 {
-			label = "SPL";
-			reg = <0x00000000 0x00080000>;
-		};
-		partition@1 {
-			label = "Primary u-boot";
-			reg = <0x00080000 0x00100000>;
-		};
-		partition@2 {
-			label = "u-boot-env";
-			reg = <0x00180000 0x00080000>;
-		};
-		partition@3 {
-			label = "Secondary u-boot";
-			reg = <0x00200000 0x00100000>;
-		};
-		partition@4 {
-			label = "Primary dtb";
-			reg = <0x00300000 0x00080000>;
-		};
-		partition@5 {
-			label = "Secondary dtb";
-			reg = <0x00380000 0x00080000>;
-		};
-		partition@6 {
-			label = "Primary kernel";
-			reg = <0x00400000 0x00A00000>;
-		};
-		partition@7 {
-			label = "Secondary kernel";
-			reg = <0x00E00000 0x00A00000>;
-		};
-		partition@8 {
-			label = "Primary rootfs";
-			reg = <0x03000000 0x03000000>;
-		};
-		partition@9 {
-			label = "Secondary rootfs";
-			reg = <0x06000000 0x03000000>;
-		};
-		partition@10 {
-			label = "Primary user configuration";
-			reg = <0x09000000 0x00600000>;
-		};
-		partition@11 {
-			label = "Secondary user configuration";
-			reg = <0x09600000 0x00600000>;
-		};
-		partition@12 {
-			label = "Factory default configuration";
-			reg = <0x09C00000 0x00600000>;
-		};
-		partition@13 {
-			label = "Storage";
-			reg = <0x0A200000 0x35E00000>;
-		};
-	};
-};
-
-/include/ "tps65217.dtsi"
-
-&tps {
-	/*
-	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
-	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
-	 * mode and risk hardware damage if this mode is entered.
-	 *
-	 * For details, see linux-omap mailing list May 2015 thread
-	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
-	 * In particular, messages:
-	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
-	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
-	 *
-	 * You can override this later with
-	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
-	 * if you want to use RTC-only mode and made sure you are not affected
-	 * by the hardware problems. (Tip: double-check by performing a current
-	 * measurement after shutdown: it should be less than 1 mA.)
-	 */
-	ti,pmic-shutdown-controller;
-
-	regulators {
-		dcdc1_reg: regulator@0 {
-			regulator-name = "vdds_dpr";
-			regulator-always-on;
-		};
-
-		dcdc2_reg: regulator@1 {
-			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
-			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1325000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		dcdc3_reg: regulator@2 {
-			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
-			regulator-name = "vdd_core";
-			regulator-min-microvolt = <925000>;
-			regulator-max-microvolt = <1150000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		ldo1_reg: regulator@3 {
-			regulator-name = "vio,vrtc,vdds";
-			regulator-always-on;
-		};
-
-		ldo2_reg: regulator@4 {
-			regulator-name = "vdd_3v3aux";
-			regulator-always-on;
-		};
-
-		ldo3_reg: regulator@5 {
-			regulator-name = "vdd_1v8";
-			regulator-always-on;
-		};
-
-		ldo4_reg: regulator@6 {
-			regulator-name = "vdd_3v3a";
-			regulator-always-on;
-		};
-	};
-};
-
-&mac {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&cpsw_default>;
-	pinctrl-1 = <&cpsw_sleep>;
-	status = "okay";
-};
-
-&davinci_mdio {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&davinci_mdio_default>;
-	pinctrl-1 = <&davinci_mdio_sleep>;
-	status = "okay";
-};
-
-&cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <1>;
-	phy-mode = "mii";
-};
-
-&cpsw_emac1 {
-	phy_id = <&davinci_mdio>, <2>;
-	phy-mode = "mii";
-};
-
-&tscadc {
-	status = "okay";
-	tsc {
-		ti,wires = <4>;
-		ti,x-plate-resistance = <200>;
-		ti,coordinate-readouts = <5>;
-		ti,wire-config = <0x00 0x11 0x22 0x33>;
-		ti,charge-delay = <0x400>;
-	};
-
-	adc {
-		ti,adc-channels = <4 5 6 7>;
-	};
-};
-
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&ldo4_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins_default>;
-	cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
-};
-
-
-&mmc3 {
-	/* these are on the crossbar and are outlined in the
-	   xbar-event-map element */
-	dmas = <&edma 12
-		&edma 13>;
-	dma-names = "tx", "rx";
-	status = "okay";
-	vmmc-supply = <&wlan_en_reg>;
-	bus-width = <4>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc3_pins &wlan_pins>;
-	ti,non-removable;
-	ti,needs-special-hs-handling;
-	cap-power-off-card;
-	keep-power-in-suspend;
-
-	#address-cells = <1>;
-	#size-cells = <0>;
-	wlcore: wlcore@0 {
-		compatible = "ti,wl1835";
-		reg = <2>;
-		interrupt-parent = <&gpio3>;
-		interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
-	};
-};
-
-&edma {
-	ti,edma-xbar-event-map = /bits/ 16 <1 12
-					    2 13>;
-};
-
-&sham {
-	status = "okay";
-};
-
-&aes {
-	status = "okay";
-};
-
-&dcan1 {
-	status = "disabled";	/* Enable only if Profile 1 is selected */
-	pinctrl-names = "default";
-	pinctrl-0 = <&dcan1_pins_default>;
-};

board-support/u-boot-2017.01+gitAUTOINC+340fb36f04-g340fb36f04/arch/arm/dts/[AX80]am335x-evm.dts

@@ -21,7 +21,7 @@
 
 	cpus {
 		cpu@0 {
-			cpu0-supply = <&vdd1_reg>;
+			cpu0-supply = <&dcdc2_reg>;
 		};
 	};
 
@@ -404,8 +404,8 @@
 	status = "okay";
 	clock-frequency = <400000>;
 
-	tps: tps@2d {
-		reg = <0x2d>;
+	tps: tps@24 {
+		reg = <0x24>;
 	};
 };
 
@@ -489,9 +489,9 @@
 		status = "okay";
 
 		/* Regulators */
-		AVDD-supply = <&vaux2_reg>;
-		IOVDD-supply = <&vaux2_reg>;
-		DRVDD-supply = <&vaux2_reg>;
+		AVDD-supply = <&ldo2_reg>;
+		IOVDD-supply = <&ldo2_reg>;
+		DRVDD-supply = <&ldo2_reg>;
 		DVDD-supply = <&vbat>;
 	};
 };
@@ -613,96 +613,69 @@
 	};
 };
 
-#include "tps65910.dtsi"
-#if 0
-&mcasp1 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&am335x_evm_audio_pins>;
-
-		status = "okay";
+/include/ "tps65217.dtsi"
 
-		op-mode = <0>;          /* MCASP_IIS_MODE */
-		tdm-slots = <2>;
-		/* 4 serializers */
-		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
-			0 0 1 2
-		>;
-		tx-num-evt = <32>;
-		rx-num-evt = <32>;
-};
-#endif
 &tps {
-	vcc1-supply = <&vbat>;
-	vcc2-supply = <&vbat>;
-	vcc3-supply = <&vbat>;
-	vcc4-supply = <&vbat>;
-	vcc5-supply = <&vbat>;
-	vcc6-supply = <&vbat>;
-	vcc7-supply = <&vbat>;
-	vccio-supply = <&vbat>;
+	/*
+	 * Configure pmic to enter OFF-state instead of SLEEP-state ("RTC-only
+	 * mode") at poweroff.  Most BeagleBone versions do not support RTC-only
+	 * mode and risk hardware damage if this mode is entered.
+	 *
+	 * For details, see linux-omap mailing list May 2015 thread
+	 *	[PATCH] ARM: dts: am335x-bone* enable pmic-shutdown-controller
+	 * In particular, messages:
+	 *	http://www.spinics.net/lists/linux-omap/msg118585.html
+	 *	http://www.spinics.net/lists/linux-omap/msg118615.html
+	 *
+	 * You can override this later with
+	 *	&tps {  /delete-property/ ti,pmic-shutdown-controller;  }
+	 * if you want to use RTC-only mode and made sure you are not affected
+	 * by the hardware problems. (Tip: double-check by performing a current
+	 * measurement after shutdown: it should be less than 1 mA.)
+	 */
+	ti,pmic-shutdown-controller;
 
 	regulators {
-		vrtc_reg: regulator@0 {
+		dcdc1_reg: regulator@0 {
+			regulator-name = "vdds_dpr";
 			regulator-always-on;
 		};
 
-		vio_reg: regulator@1 {
-			regulator-always-on;
-		};
-
-		vdd1_reg: regulator@2 {
+		dcdc2_reg: regulator@1 {
 			/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
 			regulator-name = "vdd_mpu";
-			regulator-min-microvolt = <912500>;
-			regulator-max-microvolt = <1312500>;
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <1325000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
-		vdd2_reg: regulator@3 {
+		dcdc3_reg: regulator@2 {
 			/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
 			regulator-name = "vdd_core";
-			regulator-min-microvolt = <912500>;
+			regulator-min-microvolt = <925000>;
 			regulator-max-microvolt = <1150000>;
 			regulator-boot-on;
 			regulator-always-on;
 		};
 
-		vdd3_reg: regulator@4 {
-			regulator-always-on;
-		};
-
-		vdig1_reg: regulator@5 {
-			regulator-always-on;
-		};
-
-		vdig2_reg: regulator@6 {
-			regulator-always-on;
-		};
-
-		vpll_reg: regulator@7 {
-			regulator-always-on;
-		};
-
-		vdac_reg: regulator@8 {
-			regulator-always-on;
-		};
-
-		vaux1_reg: regulator@9 {
+		ldo1_reg: regulator@3 {
+			regulator-name = "vio,vrtc,vdds";
 			regulator-always-on;
 		};
 
-		vaux2_reg: regulator@10 {
+		ldo2_reg: regulator@4 {
+			regulator-name = "vdd_3v3aux";
 			regulator-always-on;
 		};
 
-		vaux33_reg: regulator@11 {
+		ldo3_reg: regulator@5 {
+			regulator-name = "vdd_1v8";
 			regulator-always-on;
 		};
 
-		vmmc_reg: regulator@12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <3300000>;
+		ldo4_reg: regulator@6 {
+			regulator-name = "vdd_3v3a";
 			regulator-always-on;
 		};
 	};
@@ -749,7 +722,7 @@
 
 &mmc1 {
 	status = "okay";
-	vmmc-supply = <&vmmc_reg>;
+	vmmc-supply = <&ldo4_reg>;
 	bus-width = <4>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins_default>;

board-support/u-boot-2017.01+gitAUTOINC+340fb36f04-g340fb36f04/board/ti/am335x/board.c

@@ -524,7 +524,11 @@ void scale_vcores(void)
 	if (board_is_beaglebonex())
 		scale_vcores_bone(freq);
 	else
+#if defined(TPS65217)
+		scale_vcores_bone(freq);
+#else
 		scale_vcores_generic(freq);
+#endif
 }
 
 void set_uart_mux_conf(void)

run_gen_make_script.sh

@@ -15,7 +15,7 @@ echo -e "\t@echo ==================================="
 echo -e "\t@echo    Building U-boot"
 echo -e "\t@echo ==================================="
 echo -e "\t@cp -f \$(UBOOT_INSTALL_DIR)/arch/arm/dts/[$1]am335x-evm.dts \$(UBOOT_INSTALL_DIR)/arch/arm/dts/am335x-evm.dts"
-echo -e "\t\$(MAKE) -j \$(MAKE_JOBS) -C \$(UBOOT_INSTALL_DIR) CROSS_COMPILE=\$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303"
+echo -e "\t\$(MAKE) -j \$(MAKE_JOBS) -C \$(UBOOT_INSTALL_DIR) CROSS_COMPILE=\$(CROSS_COMPILE) FLASH_IC=MT29F16G08_BCH16 DDR_IC=MT41K256M16HA125E_303 PMIC=TPS65910"
 echo -e "\t@cp -f \$(UBOOT_INSTALL_DIR)/MLO EVSE/Projects/$1/Images/"
 echo -e "\t@cp -f \$(UBOOT_INSTALL_DIR)/u-boot.img EVSE/Projects/$1/Images/"
 echo -e "\t@cp -f \$(UBOOT_INSTALL_DIR)/spl/u-boot-spl.bin EVSE/Projects/$1/Images/"