| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100 |
- /*
- * (C) Copyright 2010
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
- #ifndef __MVMFP_H
- #define __MVMFP_H
- /*
- * Header file for MultiFunctionPin (MFP) Configururation framework
- *
- * Processors Supported:
- * 1. Marvell ARMADA100 Processors
- *
- * processor to be supported should be added here
- */
- /*
- * MFP configuration is represented by a 32-bit unsigned integer
- */
- #ifdef CONFIG_MVMFP_V2
- #define MFP(_off, _pull, _drv, _slp, _edge, _sleep, _afn) ( \
- /* bits 31..16 - MFP Register Offset */ (((_off) & 0xffff) << 16) | \
- /* bits 15..13 - Run Mode Pull State */ (((_pull) & 0x7) << 13) | \
- /* bit 12..11 - Driver Strength */ (((_drv) & 0x3) << 11) | \
- /* bits 10 - pad driver */ (((_slp) & 0x1) << 10) | \
- /* bit 09..07 - sleep mode */ (((_sleep) & 0xe) << 6) | \
- /* bits 06..04 - Edge Detection */ (((_edge) & 0x7) << 4) | \
- /* bits 03 - sleep mode */ (((_sleep) & 0x1) << 3) | \
- /* bits 02..00 - Alt-fun select */ ((_afn) & 0x7))
- #else
- #define MFP(_off, _pull, _drv, _slp, _edge, _sleep, _afn) ( \
- /* bits 31..16 - MFP Register Offset */ (((_off) & 0xffff) << 16) | \
- /* bits 15..13 - Run Mode Pull State */ (((_pull) & 0x7) << 13) | \
- /* bit 12 - Unused */ \
- /* bits 11..10 - Driver Strength */ (((_drv) & 0x3) << 10) | \
- /* bit 09..07 - sleep mode */ (((_sleep) & 0xe) << 6) | \
- /* bits 06..04 - Edge Detection */ (((_edge) & 0x7) << 4) | \
- /* bits 03 - sleep mode */ (((_sleep) & 0x1) << 3) | \
- /* bits 02..00 - Alt-fun select */ ((_afn) & 0x7))
- #endif
- /*
- * to facilitate the definition, the following macros are provided
- *
- * offset, pull,pF, drv,dF, edge,eF ,afn,aF
- */
- #define MFP_OFFSET_MASK MFP(0xffff, 0, 0, 0, 0, 0, 0)
- #define MFP_REG(x) MFP(x, 0, 0, 0, 0, 0, 0)
- #define MFP_REG_GET_OFFSET(x) ((x & MFP_OFFSET_MASK) >> 16)
- #define MFP_AF0 MFP(0x0000, 0, 0, 0, 0, 0, 0)
- #define MFP_AF1 MFP(0x0000, 0, 0, 0, 0, 0, 1)
- #define MFP_AF2 MFP(0x0000, 0, 0, 0, 0, 0, 2)
- #define MFP_AF3 MFP(0x0000, 0, 0, 0, 0, 0, 3)
- #define MFP_AF4 MFP(0x0000, 0, 0, 0, 0, 0, 4)
- #define MFP_AF5 MFP(0x0000, 0, 0, 0, 0, 0, 5)
- #define MFP_AF6 MFP(0x0000, 0, 0, 0, 0, 0, 6)
- #define MFP_AF7 MFP(0x0000, 0, 0, 0, 0, 0, 7)
- #define MFP_AF_MASK MFP(0x0000, 0, 0, 0, 0, 0, 7)
- #define MFP_SLEEP_CTRL2 MFP(0x0000, 0, 0, 0, 0, 1, 0)
- #define MFP_SLEEP_DIR MFP(0x0000, 0, 0, 0, 0, 2, 0)
- #define MFP_SLEEP_DATA MFP(0x0000, 0, 0, 0, 0, 4, 0)
- #define MFP_SLEEP_CTRL MFP(0x0000, 0, 0, 0, 0, 8, 0)
- #define MFP_SLEEP_MASK MFP(0x0000, 0, 0, 0, 0, 0xf, 0)
- #define MFP_LPM_EDGE_NONE MFP(0x0000, 0, 0, 0, 4, 0, 0)
- #define MFP_LPM_EDGE_RISE MFP(0x0000, 0, 0, 0, 1, 0, 0)
- #define MFP_LPM_EDGE_FALL MFP(0x0000, 0, 0, 0, 2, 0, 0)
- #define MFP_LPM_EDGE_BOTH MFP(0x0000, 0, 0, 0, 3, 0, 0)
- #define MFP_LPM_EDGE_MASK MFP(0x0000, 0, 0, 0, 7, 0, 0)
- #define MFP_SLP_DI MFP(0x0000, 0, 0, 1, 0, 0, 0)
- #define MFP_DRIVE_VERY_SLOW MFP(0x0000, 0, 0, 0, 0, 0, 0)
- #define MFP_DRIVE_SLOW MFP(0x0000, 0, 1, 0, 0, 0, 0)
- #define MFP_DRIVE_MEDIUM MFP(0x0000, 0, 2, 0, 0, 0, 0)
- #define MFP_DRIVE_FAST MFP(0x0000, 0, 3, 0, 0, 0, 0)
- #define MFP_DRIVE_MASK MFP(0x0000, 0, 3, 0, 0, 0, 0)
- #define MFP_PULL_NONE MFP(0x0000, 0, 0, 0, 0, 0, 0)
- #define MFP_PULL_LOW MFP(0x0000, 5, 0, 0, 0, 0, 0)
- #define MFP_PULL_HIGH MFP(0x0000, 6, 0, 0, 0, 0, 0)
- #define MFP_PULL_BOTH MFP(0x0000, 7, 0, 0, 0, 0, 0)
- #define MFP_PULL_FLOAT MFP(0x0000, 4, 0, 0, 0, 0, 0)
- #define MFP_PULL_MASK MFP(0x0000, 7, 0, 0, 0, 0, 0)
- #define MFP_VALUE_MASK (MFP_PULL_MASK | MFP_DRIVE_MASK | MFP_SLP_DI \
- | MFP_LPM_EDGE_MASK | MFP_SLEEP_MASK \
- | MFP_AF_MASK)
- #define MFP_EOC 0xffffffff /* indicates end-of-conf */
- /* Functions */
- void mfp_config(u32 *mfp_cfgs);
- #endif /* __MVMFP_H */
|
