Ana Sayfa Keşfet Yardım
Giriş Yap
8516
/
Test
1
0
Çatalla 0
Dosyalar Sorunlar 0 Değişiklik İstekleri 0 Wiki
Dal: master
Dallar Biçim İmleri
Test
/
board-support
/
u-boot-2017.01+gitAUTOINC+340fb36f04-g340fb36f04
/
include
/
configs
/
o2dnt2.h

o2dnt2.h 2.0 KB
Kalıcı Bağlantı Geçmiş Ham

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566 
  1. /*
    2. 

  2.  * (C) Copyright 2012
    3. 

  3.  * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
    4. 

  4.  *
    5. 

  5.  * SPDX-License-Identifier:	GPL-2.0+
    6. 

  6.  */
    7. 

  7. 

  8. /*
    9. 

  9.  * Valid values for CONFIG_SYS_TEXT_BASE are:
    10. 

  10.  * 0xFC000000   boot low boot high (standard configuration)
    11. 

  11.  * 0x00100000   boot from RAM (for testing only)
    12. 

  12.  */
    13. 

  13. #ifndef CONFIG_SYS_TEXT_BASE
    14. 

  14. #define CONFIG_SYS_TEXT_BASE	0xfc000000	/* Standard: boot low */
    15. 

  15. #endif
    16. 

  16. 

  17. /* Board specific flash config */
    18. 

  18. #define CONFIG_SYS_FLASH_BASE		0xfc000000
    19. 

  19. #define CONFIG_SYS_FLASH_SIZE		0x04000000      /* maximum 64MB */
    20. 

  20. /* max number of sectors on one chip */
    21. 

  21. #define CONFIG_SYS_MAX_FLASH_SECT	512
    22. 

  22. 

  23. /*
    24. 

  24.  * Include common defines for all ifm boards
    25. 

  25.  */
    26. 

  26. #include "o2dnt-common.h"
    27. 

  27. 

  28. /*
    29. 

  29.  * GPIO configuration:
    30. 

  30.  * CS1 SDRAM activate + no CAN + no PCI
    31. 

  31.  */
    32. 

  32. #define CONFIG_SYS_GPS_PORT_CONFIG	0x8000A004
    33. 

  33. 

  34. /* Other board specific configs */
    35. 

  35. #define CONFIG_SYS_BOOTCS_CFG		0x00057d01
    36. 

  36. #define CONFIG_SYS_RESET_ADDRESS	0xfc000000
    37. 

  37. 

  38. #define CONFIG_SYS_MEMTEST_START	0x00100000      /* memtest works on */
    39. 

  39. #define CONFIG_SYS_MEMTEST_END		0x07f00000	/* 1 - 127 MB in DRAM */
    40. 

  40. 

  41. #define CONFIG_BOARD_NAME		"o2dnt2"
    42. 

  42. #define CONFIG_BOARD_BOOTCMD		"run flash_self"
    43. 

  43. #define CONFIG_BOARD_MEM_LIMIT		__stringify(126)
    44. 

  44. #define BOARD_POST_CRC32_END		__stringify(0x01000000)
    45. 

  45. 

  46. #define CONFIG_EXTRA_ENV_SETTINGS					\
    47. 

  47. 	CONFIG_IFM_DEFAULT_ENV_SETTINGS					\
    48. 

  48. 	CONFIG_IFM_DEFAULT_ENV_OLD					\
    49. 

  49. 	CONFIG_IFM_DEFAULT_ENV_NEW					\
    50. 

  50. 	"linbot=fc060000\0"						\
    51. 

  51. 	"lintop=fc15ffff\0"						\
    52. 

  52. 	"rambot=fc160000\0"						\
    53. 

  53. 	"ramtop=fc55ffff\0"						\
    54. 

  54. 	"jffbot=fc560000\0"						\
    55. 

  55. 	"jfftop=fce5ffff\0"						\
    56. 

  56. 	"ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0"		\
    57. 

  57. 	"ubotop=fc03ffff\0"						\
    58. 

  58. 	"calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0"	\
    59. 

  59. 	"calbot=fce60000\0"						\
    60. 

  60. 	"caltop=fcffffff\0"						\
    61. 

  61. 	"progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};"	\
    62. 

  62. 		"cp.b ${fileaddr} ${calbot} ${filesize}\0"		\
    63. 

  63. 	"kernel_addr=0xfc060000\0"					\
    64. 

  64. 	"ramdisk_addr=0xfc160000\0"					\
    65. 

  65. 	"master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};"		\
    66. 

  66. 		"mw f0000b04 ${IOpin};mw f0000b10 0x20\0"
    67.