integratorcp.h 2.0 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576
  1. /*
  2. * (C) Copyright 2003
  3. * Texas Instruments.
  4. * Kshitij Gupta <kshitij@ti.com>
  5. * Configuation settings for the TI OMAP Innovator board.
  6. *
  7. * (C) Copyright 2004
  8. * ARM Ltd.
  9. * Philippe Robin, <philippe.robin@arm.com>
  10. * Configuration for Compact Integrator board.
  11. *
  12. * SPDX-License-Identifier: GPL-2.0+
  13. */
  14. #ifndef __CONFIG_H
  15. #define __CONFIG_H
  16. #include "integrator-common.h"
  17. /* Integrator CP-specific configuration */
  18. #define CONFIG_SYS_HZ_CLOCK 1000000 /* Timer 1 is clocked at 1Mhz */
  19. /*
  20. * Hardware drivers
  21. */
  22. #define CONFIG_SMC91111
  23. #define CONFIG_SMC_USE_32_BIT
  24. #define CONFIG_SMC91111_BASE 0xC8000000
  25. #undef CONFIG_SMC91111_EXT_PHY
  26. /*
  27. * Command line configuration.
  28. */
  29. #define CONFIG_BOOTARGS "root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
  30. #define CONFIG_BOOTCOMMAND "tftpboot ; bootm"
  31. #define CONFIG_SERVERIP 192.168.1.100
  32. #define CONFIG_IPADDR 192.168.1.104
  33. #define CONFIG_BOOTFILE "uImage"
  34. /*
  35. * Miscellaneous configurable options
  36. */
  37. #define PHYS_FLASH_SIZE 0x01000000 /* 16MB */
  38. #define CONFIG_SYS_MAX_FLASH_SECT 64
  39. #define CONFIG_ENV_IS_IN_FLASH 1
  40. #define CONFIG_SYS_MONITOR_LEN 0x00100000
  41. /*
  42. * Move up the U-Boot & monitor area if more flash is fitted.
  43. * If this U-Boot is to be run on Integrators with varying flash sizes,
  44. * drivers/mtd/cfi_flash.c::flash_init() can read the Integrator CP_FLASHPROG
  45. * register and dynamically assign CONFIG_ENV_ADDR & CONFIG_SYS_MONITOR_BASE
  46. * - CONFIG_SYS_MONITOR_BASE is set to indicate that the environment is not
  47. * embedded in the boot monitor(s) area
  48. */
  49. #if ( PHYS_FLASH_SIZE == 0x04000000 )
  50. #define CONFIG_ENV_ADDR 0x27F00000
  51. #define CONFIG_SYS_MONITOR_BASE 0x27F40000
  52. #elif (PHYS_FLASH_SIZE == 0x02000000 )
  53. #define CONFIG_ENV_ADDR 0x25F00000
  54. #define CONFIG_SYS_MONITOR_BASE 0x25F40000
  55. #else
  56. #define CONFIG_ENV_ADDR 0x24F00000
  57. #define CONFIG_SYS_MONITOR_BASE 0x27F40000
  58. #endif
  59. #define CONFIG_ENV_SECT_SIZE 0x40000 /* 256KB */
  60. #define CONFIG_ENV_SIZE 8192 /* 8KB */
  61. #endif /* __CONFIG_H */