123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103 |
- /*
- * (C) Copyright 2011
- * Jason Cooper <u-boot@lakedaemon.net>
- *
- * Based on work by:
- * Marvell Semiconductor <www.marvell.com>
- * Written-by: Siddarth Gore <gores@marvell.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
- #ifndef _CONFIG_DS109_H
- #define _CONFIG_DS109_H
- /*
- * FIXME: This belongs in mach-types.h. However, we only pull mach-types
- * from Linus' kernel.org tree. This hasn't been updated primarily due to
- * the recent arch/arm reshuffling. So, in the meantime, we'll place it
- * here.
- */
- #include <asm/mach-types.h>
- #ifdef MACH_TYPE_SYNOLOGY
- #error "MACH_TYPE_SYNOLOGY has been defined properly, please remove this."
- #else
- #define MACH_TYPE_SYNOLOGY 527
- #endif
- /*
- * High Level Configuration Options (easy to change)
- */
- #define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
- #define CONFIG_MACH_TYPE MACH_TYPE_SYNOLOGY
- /*
- * Commands configuration
- */
- #define CONFIG_CMD_EXT2
- #define CONFIG_CMD_FAT
- /*
- * mv-plug-common.h should be defined after CMD configs since it used them
- * to enable certain macros
- */
- #include "mv-plug-common.h"
- /*
- * Environment variables configurations
- */
- #ifdef CONFIG_SPI_FLASH
- #define CONFIG_ENV_IS_IN_SPI_FLASH 1
- #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64k */
- #else
- #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
- #endif
- #ifdef CONFIG_CMD_SF
- #define CONFIG_HARD_SPI 1
- #define CONFIG_KIRKWOOD_SPI 1
- #define CONFIG_ENV_SPI_BUS 0
- #define CONFIG_ENV_SPI_CS 0
- #define CONFIG_ENV_SPI_MAX_HZ 50000000 /* 50 MHz */
- #endif
- /*
- * max 4k env size is enough, but in case of nand
- * it has to be rounded to sector size
- */
- #define CONFIG_ENV_SIZE 0x10000
- #define CONFIG_ENV_ADDR 0x3d0000
- #define CONFIG_ENV_OFFSET 0x3d0000 /* env starts here */
- /*
- * Default environment variables
- */
- #define CONFIG_BOOTCOMMAND "setenv ethact egiga0; " \
- "${x_bootcmd_ethernet}; ${x_bootcmd_usb}; ${x_bootcmd_kernel}; "\
- "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
- "bootm 0x6400000;"
- #define CONFIG_EXTRA_ENV_SETTINGS \
- "x_bootcmd_ethernet=ping 192.168.1.2\0" \
- "x_bootcmd_usb=usb start\0" \
- "x_bootcmd_kernel=fatload usb 0 0x6400000 uImage\0" \
- "x_bootargs=console=ttyS0,115200\0" \
- "x_bootargs_root=root=/dev/sda2 rootdelay=10\0" \
- "ipaddr=192.168.1.5\0"
- /*
- * Ethernet Driver configuration
- */
- #ifdef CONFIG_CMD_NET
- #define CONFIG_MVGBE_PORTS {1, 0} /* enable one port */
- #define CONFIG_PHY_BASE_ADR 8
- #endif /* CONFIG_CMD_NET */
- /*
- * SATA Driver configuration
- */
- #ifdef CONFIG_MVSATA_IDE
- #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
- #endif /*CONFIG_MVSATA_IDE*/
- #endif /* _CONFIG_DS109_H */
|