123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081 |
- /*
- * Hitachi tx18d42vm LVDS LCD panel driver
- *
- * (C) Copyright 2015 Hans de Goede <hdegoede@redhat.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
- #include <common.h>
- #include <asm/gpio.h>
- #include <errno.h>
- /*
- * Very simple write only SPI support, this does not use the generic SPI infra
- * because that assumes R/W SPI, requiring a MISO pin. Also the necessary glue
- * code alone would be larger then this minimal version.
- */
- static void lcd_panel_spi_write(int cs, int clk, int mosi,
- unsigned int data, int bits)
- {
- int i, offset;
- gpio_direction_output(cs, 0);
- for (i = 0; i < bits; i++) {
- gpio_direction_output(clk, 0);
- offset = (bits - 1) - i;
- gpio_direction_output(mosi, (data >> offset) & 1);
- udelay(2);
- gpio_direction_output(clk, 1);
- udelay(2);
- }
- gpio_direction_output(cs, 1);
- udelay(2);
- }
- int hitachi_tx18d42vm_init(void)
- {
- const u16 init_data[] = {
- 0x0029, /* reset */
- 0x0025, /* standby */
- 0x0840, /* enable normally black */
- 0x0430, /* enable FRC/dither */
- 0x385f, /* enter test mode(1) */
- 0x3ca4, /* enter test mode(2) */
- 0x3409, /* enable SDRRS, enlarge OE width */
- 0x4041, /* adopt 2 line / 1 dot */
- };
- int i, cs, clk, mosi, ret = 0;
- cs = name_to_gpio(CONFIG_VIDEO_LCD_SPI_CS);
- clk = name_to_gpio(CONFIG_VIDEO_LCD_SPI_SCLK);
- mosi = name_to_gpio(CONFIG_VIDEO_LCD_SPI_MOSI);
- if (cs == -1 || clk == -1 || mosi == 1) {
- printf("Error tx18d42vm spi gpio config is invalid\n");
- return -EINVAL;
- }
- if (gpio_request(cs, "tx18d42vm-spi-cs") != 0 ||
- gpio_request(clk, "tx18d42vm-spi-clk") != 0 ||
- gpio_request(mosi, "tx18d42vm-spi-mosi") != 0) {
- printf("Error cannot request tx18d42vm spi gpios\n");
- ret = -EBUSY;
- goto out;
- }
- for (i = 0; i < ARRAY_SIZE(init_data); i++)
- lcd_panel_spi_write(cs, clk, mosi, init_data[i], 16);
- mdelay(50); /* All the tx18d42vm drivers have a delay here ? */
- lcd_panel_spi_write(cs, clk, mosi, 0x00ad, 16); /* display on */
- out:
- gpio_free(mosi);
- gpio_free(clk);
- gpio_free(cs);
- return ret;
- }
|