Test/board-support/u-boot-2017.01+gitAUTOINC+340fb36f04-g340fb36f04/drivers/usb/gadget/ci_udc.h

/*
 * Copyright 2011, Marvell Semiconductor Inc.
 *
 * Licensed under the GPL-2 or later.
 */
#ifndef __GADGET__CI_UDC_H__
#define __GADGET__CI_UDC_H__

#define NUM_ENDPOINTS		6

#ifdef CONFIG_CI_UDC_HAS_HOSTPC
struct ci_udc {
	u32 usbcmd;		/* 0x130 */
	u32 usbsts;		/* 0x134 */
	u32 pad1[3];
	u32 devaddr;		/* 0x144 */
	u32 epinitaddr;		/* 0x148 */
	u32 pad2[10];
	u32 portsc;		/* 0x174 */
	u32 pad178[(0x1b4 - (0x174 + 4)) / 4];
	u32 hostpc1_devlc;	/* 0x1b4 */
	u32 pad1b8[(0x1f8 - (0x1b4 + 4)) / 4];
	u32 usbmode;		/* 0x1f8 */
	u32 pad1fc[(0x208 - (0x1f8 + 4)) / 4];
	u32 epsetupstat;	/* 0x208 */
	u32 epprime;		/* 0x20c */
	u32 epflush;		/* 0x210 */
	u32 epstat;		/* 0x214 */
	u32 epcomp;		/* 0x218 */
	u32 epctrl[16];		/* 0x21c */
};
#else
struct ci_udc {
	u32 usbcmd;		/* 0x140 */
	u32 usbsts;		/* 0x144 */
	u32 pad1[3];
	u32 devaddr;		/* 0x154 */
	u32 epinitaddr;		/* 0x158 */
	u32 pad2[10];
	u32 portsc;		/* 0x184 */
	u32 pad3[8];
	u32 usbmode;		/* 0x1a8 */
	u32 epstat;		/* 0x1ac */
	u32 epprime;		/* 0x1b0 */
	u32 epflush;		/* 0x1b4 */
	u32 pad4;
	u32 epcomp;		/* 0x1bc */
	u32 epctrl[16];		/* 0x1c0 */
};

#define PTS_ENABLE	2
#define PTS(x)		(((x) & 0x3) << 30)
#define PFSC		(1 << 24)
#endif

#define MICRO_8FRAME	0x8
#define USBCMD_ITC(x)	((((x) > 0xff) ? 0xff : x) << 16)
#define USBCMD_FS2	(1 << 15)
#define USBCMD_RST	(1 << 1)
#define USBCMD_RUN	(1)

#define STS_SLI		(1 << 8)
#define STS_URI		(1 << 6)
#define STS_PCI		(1 << 2)
#define STS_UEI		(1 << 1)
#define STS_UI		(1 << 0)

#define USBMODE_DEVICE	2

#define EPT_TX(x)	(1 << (((x) & 0xffff) + 16))
#define EPT_RX(x)	(1 << ((x) & 0xffff))

#define CTRL_TXE	(1 << 23)
#define CTRL_TXR	(1 << 22)
#define CTRL_RXE	(1 << 7)
#define CTRL_RXR	(1 << 6)
#define CTRL_TXT_BULK	(2 << 18)
#define CTRL_RXT_BULK	(2 << 2)

struct ci_req {
	struct usb_request	req;
	struct list_head	queue;
	/* Bounce buffer allocated if needed to align the transfer */
	uint8_t *b_buf;
	uint32_t b_len;
	/* Buffer for the current transfer. Either req.buf/len or b_buf/len */
	uint8_t *hw_buf;
	uint32_t hw_len;
	uint32_t dtd_count;
};

struct ci_ep {
	struct usb_ep ep;
	struct list_head queue;
	bool req_primed;
	const struct usb_endpoint_descriptor *desc;
};

struct ci_drv {
	struct usb_gadget		gadget;
	struct ci_req			*ep0_req;
	bool				ep0_data_phase;
	struct usb_gadget_driver	*driver;
	struct ehci_ctrl		*ctrl;
	struct ept_queue_head		*epts;
	uint8_t				*items_mem;
	struct ci_ep			ep[NUM_ENDPOINTS];
};

struct ept_queue_head {
	unsigned config;
	unsigned current;	/* read-only */

	unsigned next;
	unsigned info;
	unsigned page0;
	unsigned page1;
	unsigned page2;
	unsigned page3;
	unsigned page4;
	unsigned reserved_0;

	unsigned char setup_data[8];

	unsigned reserved_1;
	unsigned reserved_2;
	unsigned reserved_3;
	unsigned reserved_4;
};

#define CONFIG_MAX_PKT(n)	((n) << 16)
#define CONFIG_ZLT		(1 << 29)	/* stop on zero-len xfer */
#define CONFIG_IOS		(1 << 15)	/* IRQ on setup */

struct ept_queue_item {
	unsigned next;
	unsigned info;
	unsigned page0;
	unsigned page1;
	unsigned page2;
	unsigned page3;
	unsigned page4;
	unsigned reserved;
};

#define TERMINATE 1
#define INFO_BYTES(n)		((n) << 16)
#define INFO_IOC		(1 << 15)
#define INFO_ACTIVE		(1 << 7)
#define INFO_HALTED		(1 << 6)
#define INFO_BUFFER_ERROR	(1 << 5)
#define INFO_TX_ERROR		(1 << 3)
#endif