| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091 |
- /*
- * Simple U-Boot uImage source file containing a single kernel
- */
- /dts-v1/;
- / {
- description = "Simple image with single Linux kernel";
- #address-cells = <1>;
- images {
- kernel@1 {
- description = "Vanilla Linux kernel";
- data = /incbin/("./vmlinux.bin.gz");
- type = "kernel";
- arch = "ppc";
- os = "linux";
- compression = "gzip";
- load = <00000000>;
- entry = <00000000>;
- hash@1 {
- algo = "crc32";
- };
- hash@2 {
- algo = "sha1";
- };
- };
- };
- configurations {
- default = "config@1";
- config@1 {
- description = "Boot Linux kernel";
- kernel = "kernel@1";
- };
- };
- };
- For x86 a setup node is also required: see x86-fit-boot.txt.
- /dts-v1/;
- / {
- description = "Simple image with single Linux kernel on x86";
- #address-cells = <1>;
- images {
- kernel@1 {
- description = "Vanilla Linux kernel";
- data = /incbin/("./image.bin.lzo");
- type = "kernel";
- arch = "x86";
- os = "linux";
- compression = "lzo";
- load = <0x01000000>;
- entry = <0x00000000>;
- hash@2 {
- algo = "sha1";
- };
- };
- setup@1 {
- description = "Linux setup.bin";
- data = /incbin/("./setup.bin");
- type = "x86_setup";
- arch = "x86";
- os = "linux";
- compression = "none";
- load = <0x00090000>;
- entry = <0x00090000>;
- hash@2 {
- algo = "sha1";
- };
- };
- };
- configurations {
- default = "config@1";
- config@1 {
- description = "Boot Linux kernel";
- kernel = "kernel@1";
- setup = "setup@1";
- };
- };
- };
- Note: the above assumes a 32-bit kernel. To directly boot a 64-bit kernel,
- change both arch values to "x86_64". U-Boot will then change to 64-bit mode
- before booting the kernel (see boot_linux_kernel()).
|
