| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980818283848586 |
- TXT3 = \
- modbus_close.txt \
- modbus_connect.txt \
- modbus_flush.txt \
- modbus_free.txt \
- modbus_get_byte_from_bits.txt \
- modbus_get_byte_timeout.txt \
- modbus_get_float.txt \
- modbus_get_float_abcd.txt \
- modbus_get_float_badc.txt \
- modbus_get_float_cdab.txt \
- modbus_get_float_dcba.txt \
- modbus_get_header_length.txt \
- modbus_get_response_timeout.txt \
- modbus_get_slave.txt \
- modbus_get_socket.txt \
- modbus_mapping_free.txt \
- modbus_mapping_new.txt \
- modbus_mapping_new_start_address.txt \
- modbus_mask_write_register.txt \
- modbus_new_rtu.txt \
- modbus_new_tcp_pi.txt \
- modbus_new_tcp.txt \
- modbus_read_bits.txt \
- modbus_read_input_bits.txt \
- modbus_read_input_registers.txt \
- modbus_read_registers.txt \
- modbus_receive_confirmation.txt \
- modbus_receive.txt \
- modbus_reply_exception.txt \
- modbus_reply.txt \
- modbus_report_slave_id.txt \
- modbus_rtu_get_serial_mode.txt \
- modbus_rtu_set_serial_mode.txt \
- modbus_rtu_get_rts.txt \
- modbus_rtu_set_rts.txt \
- modbus_rtu_set_custom_rts.txt \
- modbus_rtu_get_rts_delay.txt \
- modbus_rtu_set_rts_delay.txt \
- modbus_send_raw_request.txt \
- modbus_set_bits_from_bytes.txt \
- modbus_set_bits_from_byte.txt \
- modbus_set_byte_timeout.txt \
- modbus_set_debug.txt \
- modbus_set_error_recovery.txt \
- modbus_set_float.txt \
- modbus_set_float_abcd.txt \
- modbus_set_float_badc.txt \
- modbus_set_float_cdab.txt \
- modbus_set_float_dcba.txt \
- modbus_set_response_timeout.txt \
- modbus_set_slave.txt \
- modbus_set_socket.txt \
- modbus_strerror.txt \
- modbus_tcp_accept.txt \
- modbus_tcp_pi_accept.txt \
- modbus_tcp_listen.txt \
- modbus_tcp_pi_listen.txt \
- modbus_write_and_read_registers.txt \
- modbus_write_bits.txt \
- modbus_write_bit.txt \
- modbus_write_registers.txt \
- modbus_write_register.txt
- TXT7 = libmodbus.txt
- EXTRA_DIST = asciidoc.conf $(TXT3) $(TXT7)
- MAN3 = $(TXT3:%.txt=%.3)
- MAN7 = $(TXT7:%.txt=%.7)
- if BUILD_DOC
- man3_MANS = $(MAN3)
- man7_MANS = $(MAN7)
- endif
- HTML = $(TXT3:%.txt=%.html) $(TXT7:%.txt=%.html)
- htmldoc: $(HTML)
- .txt.html:
- asciidoc -d manpage -b xhtml11 -f asciidoc.conf -alibmodbus_version=@LIBMODBUS_VERSION@ $<
- .txt.3 .txt.7:
- a2x --doctype manpage --format manpage -alibmodbus_version=@LIBMODBUS_VERSION@ $<
- CLEANFILES = *.3 *.7 *.html
|
